linux-stable.git/drivers/mmc, branch v4.9.64

mmc: s3cmci: include linux/interrupt.h for tasklet_struct

2017-11-08T09:08:33+00:00

[ Upstream commit e1c6ec26b853e9062f0b3daaf695c546d0702953 ]

I got this new build error on today's linux-next

drivers/mmc/host/s3cmci.h:69:24: error: field 'pio_tasklet' has incomplete type
  struct tasklet_struct pio_tasklet;
drivers/mmc/host/s3cmci.c: In function 's3cmci_enable_irq':
drivers/mmc/host/s3cmci.c:390:4: error: implicit declaration of function 'enable_irq';did you mean 'enable_imask'? [-Werror=implicit-function-declaration]

While I haven't found out why this happened now and not earlier, the
solution is obvious, we should include the header that defines
the structure.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mmc: core: add driver strength selection when selecting hs400es

2017-10-12T09:51:25+00:00

commit fb458864d9a78cc433fec7979acbe4078c82d7a8 upstream.

The driver strength selection is missed and required when selecting
hs400es. So, It is added here.

Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Signed-off-by: Hankyung Yu 
Signed-off-by: Chanho Min 
Reviewed-by: Adrian Hunter 
Reviewed-by: Shawn Lin 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdio: fix alignment issue in struct sdio_func

2017-10-08T08:26:08+00:00

[ Upstream commit 5ef1ecf060f28ecef313b5723f1fd39bf5a35f56 ]

Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be
used for DMA to be 8-byte-aligned. struct sdio_func has an embedded
small DMA buffer not meeting this requirement.
When testing switching to descriptor chain mode in meson-gx driver
SDIO is broken therefore. Fix this by allocating the small DMA buffer
separately as kmalloc ensures that the returned memory area is
properly aligned for every basic data type.

Signed-off-by: Heiner Kallweit 
Tested-by: Helmut Klein 
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mmc: mmc: correct the logic for setting HS400ES signal voltage

2017-08-16T20:43:17+00:00

commit 92ddd95919466de5d34f3cb43635da9a7f9ab814 upstream.

Change the default err value to -EINVAL, make sure the card only
has type EXT_CSD_CARD_TYPE_HS400_1_8V also do the signal voltage
setting when select hs400es mode.

Fixes: commit 1720d3545b77 ("mmc: core: switch to 1V8 or 1V2 for hs400es mode")
Signed-off-by: Haibo Chen 
Reviewed-by: Shawn Lin 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: core: Use device_property_read instead of of_property_read

2017-08-11T15:49:31+00:00

commit 73a47a9bb3e2c4a9c553c72456e63ab991b1a4d9 upstream.

Using the device_property interfaces allows mmc drivers to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods 
Reviewed-by: Chris Metcalf 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc: Use device_property_read instead of of_property_read

2017-08-11T15:49:31+00:00

commit 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 upstream.

Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods 
Reviewed-by: Chris Metcalf 
Acked-by: Jaehoon Chung 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: core: Fix access to HS400-ES devices

2017-08-11T15:49:29+00:00

commit 773dc118756b1f38766063e90e582016be868f09 upstream.

HS400-ES devices fail to initialize with the following error messages.

mmc1: power class selection to bus width 8 ddr 0 failed
mmc1: error -110 whilst initialising MMC card

This was seen on Samsung Chromebook Plus. Code analysis points to
commit 3d4ef329757c ("mmc: core: fix multi-bit bus width without
high-speed mode"), which attempts to set the bus width for all but
HS200 devices unconditionally. However, for HS400-ES, the bus width
is already selected.

Cc: Anssi Hannula 
Cc: Douglas Anderson 
Cc: Brian Norris 
Fixes: 3d4ef329757c ("mmc: core: fix multi-bit bus width ...")
Signed-off-by: Guenter Roeck 
Reviewed-by: Douglas Anderson 
Reviewed-by: Shawn Lin 
Tested-by: Heiko Stuebner 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-at91: force card detect value for non removable devices

2017-08-11T15:49:28+00:00

commit 7a1e3f143176e8ebdb2f5a9b3b47abc18b879d90 upstream.

When the device is non removable, the card detect signal is often used
for another purpose i.e. muxed to another SoC peripheral or used as a
GPIO. It could lead to wrong behaviors depending the default value of
this signal if not muxed to the SDHCI controller.

Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Signed-off-by: Ludovic Desroches 
Acked-by: Adrian Hunter 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read

2017-06-07T10:07:47+00:00

commit f5f968f2371ccdebb8a365487649673c9af68d09 upstream.

The stingray SDHCI hardware supports ACMD12 and automatically
issues after multi block transfer completed.

If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen
on multi block read command with below error message:

Got data interrupt 0x00000002 even though no data
operation was in progress.

This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable
ACM12 support in SDHCI hardware and suppress spurious interrupt.

Signed-off-by: Srinath Mannam 
Reviewed-by: Ray Jui 
Reviewed-by: Scott Branden 
Acked-by: Adrian Hunter 
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

Revert "mmc: sdhci-msm: Enable few quirks"

2017-05-03T15:36:34+00:00

This reverts commit d84be51d1c1d3fa148a3abdeeb1455690df59e63 which is
commit a0e3142869d29688de6f77be31aa7a401a4a88f1 upstream.

It causes problems and would need other patches backported to resolve
it, and it shouldn't have been applied to 4.9-stable.

Reported-by: Georgi Djakov 
Cc: Sahitya Tummala 
Cc: Ritesh Harjani 
Cc: Adrian Hunter 
Cc: Ulf Hansson 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman