linux-stable.git/drivers/mmc, branch v4.12.6

mmc: dw_mmc: Use device_property_read instead of of_property_read

2017-08-11T15:33:50+00:00

commit 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 upstream.

Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods 
Reviewed-by: Chris Metcalf 
Acked-by: Jaehoon Chung 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: core: Use device_property_read instead of of_property_read

2017-08-11T15:33:50+00:00

commit 73a47a9bb3e2c4a9c553c72456e63ab991b1a4d9 upstream.

Using the device_property interfaces allows mmc drivers to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods 
Reviewed-by: Chris Metcalf 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-at91: force card detect value for non removable devices

2017-08-11T15:33:50+00:00

commit 7a1e3f143176e8ebdb2f5a9b3b47abc18b879d90 upstream.

When the device is non removable, the card detect signal is often used
for another purpose i.e. muxed to another SoC peripheral or used as a
GPIO. It could lead to wrong behaviors depending the default value of
this signal if not muxed to the SDHCI controller.

Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Signed-off-by: Ludovic Desroches 
Acked-by: Adrian Hunter 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: tmio-mmc: fix bad pointer math

2017-08-06T16:21:11+00:00

commit 9c284c41c0886f09e75c323a16278b6d353b0b4a upstream.

The existing code gives an incorrect pointer value.
The buffer pointer 'buf' was of type unsigned short *, and 'count' was a
number in bytes. A cast of buf should have been used.

However, instead of casting, just change the code to use u32 pointers.

Reported-by: Dan Carpenter 
Fixes: 8185e51f358a: ("mmc: tmio-mmc: add support for 32bit data port")
Signed-off-by: Chris Brandt 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Wolfram Sang 
Cc: 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: sunxi: Keep default timing phase settings for new timing mode

2017-08-06T16:21:07+00:00

commit 26cb2be4c7c42644ccd147c786edb9006300ee56 upstream.

The register for the "new timing mode" also has bit fields for setting
output and sample timing phases. According to comments in Allwinner's
BSP kernel, the default values are good enough.

Keep the default values already in the hardware when setting new timing
mode, instead of overwriting the whole register.

Fixes: 9a37e53e451e ("mmc: sunxi: Enable the new timings for the A64 MMC
controllers")
Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: meson-gx: work around broken SDIO with certain WiFi chips

2017-06-12T06:58:16+00:00

There have been reports about SDIO failing with certain WiFi chips in
descriptor chain mode. SD / eMMC are working fine.

So let's fall back to bounce buffer mode for command SD_IO_RW_EXTENDED.
This was reported to fix the error.

Fixes: 79ed05e329c3 "mmc: meson-gx: add support for descriptor chain mode"
Signed-off-by: Heiner Kallweit 
Tested-by: Martin Blumenstingl 
Signed-off-by: Ulf Hansson

Merge tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2017-05-26T16:05:35+00:00

Pull MMC fixes from Ulf Hansson:
 "This contains fixes to make the WiFi work again for the ARM64 Hikey
  board.

  Together with a couple of DTS updates for the Hikey board we have also
  extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
  property, as that was required to enable a graceful power off sequence
  for the WiFi chip"

* tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  arm64: dts: hikey: Fix WiFi support
  arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts
  arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators
  arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts
  arm64: dts: hikey: Add clock for the pmic mfd
  mfd: dts: hi655x: Add clock binding for the pmic
  mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property
  mmc: dt: pwrseq-simple: Invent power-off-delay-us

mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property

2017-05-23T12:17:36+00:00

If the optional power-off-delay-us property is found, insert the
corresponding delay after asserting the GPIO during power off. This enables
a graceful shutdown sequence for some devices.

Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson 
Acked-by: Arnd Bergmann

mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read

2017-05-22T16:18:04+00:00

The stingray SDHCI hardware supports ACMD12 and automatically
issues after multi block transfer completed.

If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen
on multi block read command with below error message:

Got data interrupt 0x00000002 even though no data
operation was in progress.

This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable
ACM12 support in SDHCI hardware and suppress spurious interrupt.

Signed-off-by: Srinath Mannam 
Reviewed-by: Ray Jui 
Reviewed-by: Scott Branden 
Acked-by: Adrian Hunter 
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Cc: 
Signed-off-by: Ulf Hansson

mmc: cavium: Fix probing race with regulator

2017-05-22T16:01:46+00:00

If the regulator probing is not yet finished this driver
might catch a -EPROBE_DEFER. Returning after this condition
did not remove the created platform device. On a repeated
call to the probe function the of_platform_device_create
fails.

Calling of_platform_device_destroy after EPROBE_DEFER resolves
this bug.

Signed-off-by: Jan Glauber 
Signed-off-by: Ulf Hansson