linux-stable.git/drivers/mmc, branch linux-3.10.y

mmc: sdhci: Do not disable interrupts while waiting for clock

2017-06-20T12:04:35+00:00

commit e2ebfb2142acefecc2496e71360f50d25726040b upstream.

Disabling interrupts for even a millisecond can cause problems for some
devices. That can happen when sdhci changes clock frequency because it
waits for the clock to become stable under a spin lock.

The spin lock is not necessary here. Anything that is racing with changes
to the I/O state is already broken. The mmc core already provides
synchronization via "claiming" the host.

Although the spin lock probably should be removed from the code paths that
lead to this point, such a patch would touch too much code to be suitable
for stable trees. Consequently, for this patch, just drop the spin lock
while waiting.

Signed-off-by: Adrian Hunter 
Signed-off-by: Ulf Hansson 
Tested-by: Ludovic Desroches 
Signed-off-by: Jiri Slaby 
Signed-off-by: Willy Tarreau

mmc: ushc: fix NULL-deref at probe

2017-06-07T22:47:05+00:00

commit 181302dc7239add8ab1449c23ecab193f52ee6ab upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: 53f3a9e26ed5 ("mmc: USB SD Host Controller (USHC) driver")
Cc: David Vrabel 
Signed-off-by: Johan Hovold 
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: mxs-mmc: Fix additional cycles after transmission stop

2017-06-07T22:46:56+00:00

commit 01167c7b9cbf099c69fe411a228e4e9c7104e123 upstream.

According to the code the intention is to append 8 SCK cycles
instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this
will never happened because it's an AC command not an ADTC command.
So fix this by moving the statement into the right function.

Signed-off-by: Stefan Wahren 
Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: mmc_test: Uninitialized return value

2017-06-07T22:46:53+00:00

commit 16652a936e96f5dae53c3fbd38a570497baadaa8 upstream.

We never set "ret" to RESULT_OK.

Fixes: 9f9c4180f88d ("mmc: mmc_test: add test for non-blocking transfers")
Signed-off-by: Dan Carpenter 
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: block: don't use CMD23 with very old MMC cards

2017-02-10T10:04:01+00:00

commit 0ed50abb2d8fc81570b53af25621dad560cd49b3 upstream.

CMD23 aka SET_BLOCK_COUNT was introduced with MMC v3.1.
Older versions of the specification allowed to terminate
multi-block transfers only with CMD12.

The patch fixes the following problem:

  mmc0: new MMC card at address 0001
  mmcblk0: mmc0:0001 SDMB-16 15.3 MiB
  mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
  ...
  blk_update_request: I/O error, dev mmcblk0, sector 0
  Buffer I/O error on dev mmcblk0, logical block 0, async page read
   mmcblk0: unable to read partition table

Signed-off-by: Daniel Glöckner 
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: mxs: Initialize the spinlock prior to using it

2017-02-10T10:04:01+00:00

commit f91346e8b5f46aaf12f1df26e87140584ffd1b3f upstream.

An interrupt may occur right after devm_request_irq() is called and
prior to the spinlock initialization, leading to a kernel oops,
as the interrupt handler uses the spinlock.

In order to prevent this problem, move the spinlock initialization
prior to requesting the interrupts.

Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Fabio Estevam 
Reviewed-by: Marek Vasut 
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: block: fix packed command header endianness

2016-08-27T09:40:32+00:00

commit f68381a70bb2b26c31b13fdaf67c778f92fd32b4 upstream.

The code that fills packed command header assumes that CPU runs in
little-endian mode. Hence the header is malformed in big-endian mode
and causes MMC data transfer errors:

[  563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40
[  563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1

Convert header data to LE.

Signed-off-by: Taras Kondratiuk 
Fixes: ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices")
Cc: 
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: longer timeout for long read time quirk

2016-06-07T08:42:55+00:00

commit 32ecd320db39bcb007679ed42f283740641b81ea upstream.

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk

Signed-off-by: Matt Gumbel 
Signed-off-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Willy Tarreau

mmc: mmc: Fix partition switch timeout for some eMMCs

2016-06-07T08:42:55+00:00

commit 1c447116d017a98c90f8f71c8c5a611e0aa42178 upstream.

Some eMMCs set the partition switch timeout too low.

Now typically eMMCs are considered a critical component (e.g. because
they store the root file system) and consequently are expected to be
reliable.  Thus we can neglect the use case where eMMCs can't switch
reliably and we might want a lower timeout to facilitate speedy
recovery.

Although we could employ a quirk for the cards that are affected (if
we could identify them all), as described above, there is little
benefit to having a low timeout, so instead simply set a minimum
timeout.

The minimum is set to 300ms somewhat arbitrarily - the examples that
have been seen had a timeout of 10ms but were sometimes taking 60-70ms.

Signed-off-by: Adrian Hunter 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Willy Tarreau

mmc: mmci: fix an ages old detection error

2016-03-03T23:06:23+00:00

commit 0bcb7efdff63564e80fe84dd36a9fbdfbf6697a4 upstream.

commit 4956e10903fd ("ARM: 6244/1: mmci: add variant data and default
MCICLOCK support") added variant data for ARM, U300 and Ux500 variants.
The Nomadik NHK8815/8820 variant was erroneously labeled as a U300
variant, and when the proper Nomadik variant was later introduced in
commit 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik MMCI
variant") this was not fixes. Let's say this fixes the latter commit as
there was no proper Nomadik support until then.

Fixes: 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik...")
Signed-off-by: Linus Walleij 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman