linux-stable.git/drivers/mmc/host, branch v6.8

mmc: sdhci-xenon: add timeout for PHY init complete

2024-02-28T12:41:35+00:00

AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman 
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson

mmc: sdhci-xenon: fix PHY init clock stability

2024-02-28T12:41:25+00:00

Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman 
Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com
Signed-off-by: Ulf Hansson

mmc: mmci: stm32: fix DMA API overlapping mappings warning

2024-02-14T10:05:27+00:00

Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:

DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320

DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.

If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.

Signed-off-by: Christophe Kerello 
Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson

mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected by BIOS

2024-02-06T11:08:36+00:00

Driver shall switch clock source from DLL clock to
OPE clock when power off card to ensure that card
can be identified with OPE clock by BIOS.

Signed-off-by: Fred Ai 
Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com
Signed-off-by: Ulf Hansson

Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-01-18T00:47:17+00:00

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...

Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-01-12T21:57:33+00:00

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Don't force a retune before eMMC RPMB switch
   - Add optional HS400 tuning in HS400es initialization
   - Add a sysfs node to for write-protect-group-size
   - Add re-tuning test to the mmc-test module
   - Use mrq.sbc to support close-ended ioctl requests

  MMC host:
   - mmci: Add support for SDIO in-band irqs for the stm32 variant
   - mmc_spi: Remove broken support custom DMA mapped buffers
   - mtk-sd: Improve and extend the support for tunings
   - renesas_sdhi: Document support for the RZ/Five variant
   - sdhci_am654: Drop support for the ti,otap-del-sel DT property
   - sdhci-brcmstb: Add support for the brcm 74165b0 variant
   - sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
   - sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
   - sdhci-xenon: Add support for the Marvell ac5 variant"

* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
  mmc: xenon: Add ac5 support via bounce buffer
  dt-bindings: mmc: add Marvell ac5
  mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
  mmc: core: Do not force a retune before RPMB switch
  mmc: core: Add HS400 tuning in HS400es initialization
  mmc: sdhci_omap: Fix TI SoC dependencies
  mmc: sdhci_am654: Fix TI SoC dependencies
  mmc: core: Add wp_grp_size sysfs node
  mmc: mmc_test: Add re-tuning test
  mmc: mmc_spi: remove custom DMA mapped buffers
  dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
  dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
  mmc: mtk-sd: Extend number of tuning steps
  dt-bindings: mmc: mtk-sd: add tuning steps related property
  mmc: sdhci-omap: don't misuse kernel-doc marker
  mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
  mmc: core: Use mrq.sbc in close-ended ffu
  mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
  mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
  ...

Merge tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-01-09T23:02:12+00:00

Pull spi updates from Mark Brown:
 "A moderately busy release for SPI, the main core update was the
  merging of support for multiple chip selects, used in some flash
  configurations. There were also big overhauls for the AXI SPI Engine
  and PL022 drivers, plus some new device support for ST.

  There's a few patches for other trees, API updates to allow the
  multiple chip select support and one of the naming modernisations
  touched a controller embedded in the USB code.

   - Support for multiple chip selects.

   - A big overhaul for the AXI SPI engine driver, modernising it and
     adding a bunch of new features.

   - Modernisation of the PL022 driver, fixing some issues with
     submitting messages while in atomic context in the process.

   - Many drivers were converted to use new APIs which avoid outdated
     terminology for devices and controllers.

   - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas
     RZ/Five"

* tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits)
  spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
  dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
  spi: stm32: use dma_get_slave_caps prior to configuring dma channel
  spi: axi-spi-engine: fix struct member doc warnings
  spi: pl022: update description of internal_cs_control()
  spi: pl022: delete description of cur_msg
  spi: dw: Remove Intel Thunder Bay SOC support
  spi: dw: Remove Intel Thunder Bay SOC support
  spi: sh-msiof: Enforce fixed DTDL for R-Car H3
  spi: ljca: switch to use devm_spi_alloc_host()
  spi: cs42l43: switch to use devm_spi_alloc_host()
  spi: zynqmp-gqspi: switch to use modern name
  spi: zynq-qspi: switch to use modern name
  spi: xtensa-xtfpga: switch to use modern name
  spi: xlp: switch to use modern name
  spi: xilinx: switch to use modern name
  spi: xcomm: switch to use modern name
  spi: uniphier: switch to use modern name
  spi: topcliff-pch: switch to use modern name
  spi: wpcm-fiu: switch to use devm_spi_alloc_host()
  ...

mmc: xenon: Add ac5 support via bounce buffer

2024-01-05T10:03:56+00:00

AC5/X/IM SOCs has a variant of the Xenon eMMC controller,
in which only 31-bit of addressing pass from the controller
on the AXI bus.
Since we cannot guarantee that only buffers from the first 2GB
of memory will reach the driver, the driver is configured for
SDMA mode, without 64-bit mode, overriding the DMA mask to 34-bit
to support the DDR memory mapping, which starts at offset 8GB.

Signed-off-by: Elad Nachman 
Acked-by: Adrian Hunter 
Link: https://lore.kernel.org/r/20240104173033.2836110-1-enachman@marvell.com
Signed-off-by: Ulf Hansson

mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0

2024-01-05T09:54:50+00:00

74165b0 shall use a new sdio controller core version which
requires a different reset sequence. For core reset we use
sdhci_reset. For CMD and/or DATA reset added a new function
to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN
SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or
SDHCI_RESET_DATA fields.

Signed-off-by: Kamal Dasu 
Acked-by: Adrian Hunter 
Link: https://lore.kernel.org/r/20240103222338.31447-3-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson

mmc: Merge branch fixes into next

2024-01-03T12:17:56+00:00

Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.8.

Signed-off-by: Ulf Hansson