linux-stable.git/drivers/mmc/host, branch v5.3 Linux kernel stable tree mmc: tmio: Fixup runtime PM management during remove 2019-09-13T11:49:09+00:00 Ulf Hansson ulf.hansson@linaro.org 2019-09-13T09:20:22+00:00 87b5d602a1cc76169b8d81ec2c74c8d95d9350dc Accessing the device when it may be runtime suspended is a bug, which is the case in tmio_mmc_host_remove(). Let's fix the behaviour. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> 
Accessing the device when it may be runtime suspended is a bug, which is
the case in tmio_mmc_host_remove(). Let's fix the behaviour.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
mmc: tmio: Fixup runtime PM management during probe 2019-09-13T11:49:04+00:00 Ulf Hansson ulf.hansson@linaro.org 2019-09-13T09:19:26+00:00 aa86f1a3887523d78bfadd1c4e4df8f919336511 The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> 
The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the
runtime PM status of the device, as to make it reflect the current status
of the HW. This works fine for most cases, but unfortunate not for all.
Especially, there is a generic problem when the device has a genpd attached
and that genpd have the ->start|stop() callbacks assigned.

More precisely, if the driver calls pm_runtime_set_active() during
->probe(), genpd does not get to invoke the ->start() callback for it,
which means the HW isn't really fully powered on. Furthermore, in the next
phase, when the device becomes runtime suspended, genpd will invoke the
->stop() callback for it, potentially leading to usage count imbalance
problems, depending on what's implemented behind the callbacks of course.

To fix this problem, convert to call pm_runtime_get_sync() from
tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to
avoid bumping usage counters and unnecessary re-initializing the HW the
first time the tmio driver's ->runtime_resume() callback is called,
introduce a state flag to keeping track of this.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Revert "mmc: tmio: move runtime PM enablement to the driver implementations" 2019-09-13T11:48:35+00:00 Ulf Hansson ulf.hansson@linaro.org 2019-09-13T08:03:15+00:00 8861474a105c91e812d38cd65d3be795c7f32c4f This reverts commit 7ff213193310ef8d0ee5f04f79d791210787ac2c. It turns out that the above commit introduces other problems. For example, calling pm_runtime_set_active() must not be done prior calling pm_runtime_enable() as that makes it fail. This leads to additional problems, such as clock enables being wrongly balanced. Rather than fixing the problem on top, let's start over by doing a revert. Fixes: 7ff213193310 ("mmc: tmio: move runtime PM enablement to the driver implementations") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> 
This reverts commit 7ff213193310ef8d0ee5f04f79d791210787ac2c.

It turns out that the above commit introduces other problems. For example,
calling pm_runtime_set_active() must not be done prior calling
pm_runtime_enable() as that makes it fail. This leads to additional
problems, such as clock enables being wrongly balanced.

Rather than fixing the problem on top, let's start over by doing a revert.

Fixes: 7ff213193310 ("mmc: tmio: move runtime PM enablement to the driver implementations")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" 2019-09-11T13:57:21+00:00 Daniel Drake drake@endlessm.com 2019-09-05T04:55:57+00:00 49baa01c8b99ef92958e18fb58ebeb5dfdcde8af This reverts commit 414126f9e5abf1973c661d24229543a9458fa8ce. This commit broke eMMC storage access on a new consumer MiniPC based on AMD SoC, which has eMMC connected to: 02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01) (prog-if 01) Subsystem: O2 Micro, Inc. Device 0002 During probe, several errors are seen including: mmc1: Got data interrupt 0x02000000 even though no data operation was in progress. mmc1: Timeout waiting for hardware interrupt. mmc1: error -110 whilst initialising MMC card Reverting this commit allows the eMMC storage to be detected & usable again. Signed-off-by: Daniel Drake <drake@endlessm.com> Fixes: 414126f9e5ab ("mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
This reverts commit 414126f9e5abf1973c661d24229543a9458fa8ce.

This commit broke eMMC storage access on a new consumer MiniPC based on
AMD SoC, which has eMMC connected to:

02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01) (prog-if 01)
	Subsystem: O2 Micro, Inc. Device 0002

During probe, several errors are seen including:

  mmc1: Got data interrupt 0x02000000 even though no data operation was in progress.
  mmc1: Timeout waiting for hardware interrupt.
  mmc1: error -110 whilst initialising MMC card

Reverting this commit allows the eMMC storage to be detected & usable
again.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 414126f9e5ab ("mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host
controller")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Revert "mmc: bcm2835: Terminate timeout work synchronously" 2019-09-11T13:57:21+00:00 Stefan Wahren wahrenst@gmx.net 2019-09-08T07:45:52+00:00 aea64b583601aa5e0d6ea51a0420e46e43710bd4 The commit 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") causes lockups in case of hardware timeouts due the timeout work also calling cancel_delayed_work_sync() on its own. So revert it. Fixes: 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") Cc: stable@vger.kernel.org Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The commit 37fefadee8bb ("mmc: bcm2835: Terminate timeout work
synchronously") causes lockups in case of hardware timeouts due the
timeout work also calling cancel_delayed_work_sync() on its own.
So revert it.

Fixes: 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing 2019-08-30T07:17:53+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-08-29T10:49:26+00:00 e73a3896eaca95ea5fc895720502a3f040eb4b39 The IP datasheet says this controller is compatible with SD Host Specification Version v4.00. As it turned out, the ADMA of this IP does not work with 64-bit mode when it is in the Version 3.00 compatible mode; it understands the old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the 64-bit address. I noticed this issue only after commit bd2e75633c80 ("dma-contiguous: use fallback alloc_pages for single pages"). Prior to that commit, dma_set_mask_and_coherent() returned the dma address that fits in 32-bit range, at least for the default arm64 configuration (arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the 32-bit limit, causing the real problem for the Socionext SoCs. (As a side-note, I was also able to reproduce the issue for older kernels by turning off CONFIG_DMA_CMA.) Call sdhci_enable_v4_mode() to fix this. Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The IP datasheet says this controller is compatible with SD Host
Specification Version v4.00.

As it turned out, the ADMA of this IP does not work with 64-bit mode
when it is in the Version 3.00 compatible mode; it understands the
old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA
System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the
64-bit address.

I noticed this issue only after commit bd2e75633c80 ("dma-contiguous:
use fallback alloc_pages for single pages"). Prior to that commit,
dma_set_mask_and_coherent() returned the dma address that fits in
32-bit range, at least for the default arm64 configuration
(arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the
32-bit limit, causing the real problem for the Socionext SoCs.
(As a side-note, I was also able to reproduce the issue for older
kernels by turning off CONFIG_DMA_CMA.)

Call sdhci_enable_v4_mode() to fix this.

Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-sprd: clear the UHS-I modes read from registers 2019-08-30T07:17:53+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2019-08-28T02:17:36+00:00 2f765c175e1d1acae911f889e71e5933c6488929 sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I mode used by the specific card can be selected via devicetree only. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION 2019-08-30T07:17:53+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2019-08-28T02:17:35+00:00 4324e54bbea0107b054336f20075a26939b2bd51 sprd's sd host controller doesn't support detection to card insert or remove. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
sprd's sd host controller doesn't support detection to
card insert or remove.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN 2019-08-30T07:17:53+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2019-08-28T02:17:34+00:00 6a526f66ab1494b63c71cd6639d9d96fd7216add The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on sprd's sd host controller, set quirk2 to disable configuring this. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: sdhci-sprd: add get_ro hook function 2019-08-30T07:17:53+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2019-08-28T02:17:33+00:00 4eae8cbdff942a423926486be4e781a77d619966 sprd's sd host controller doesn't support write protect to sd card. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
sprd's sd host controller doesn't support write protect to sd card.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>