linux-stable.git/drivers/mmc/host/Makefile, branch linux-3.3.y

mmc: sdhci-pci: add platform data

2012-01-12T04:58:47+00:00

Add a means of getting platform data for the SDHCI PCI
devices.  The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball

mmc: tmio: Fix build error without CONFIG_MMC_SDHI

2011-07-20T21:21:00+00:00

Only compile tmio_mmc_dma.o when CONFIG_MMC_SDHI is selected (as y or m).

Signed-off-by: Paul Parsons 
Signed-off-by: Chris Ball

mmc: host: delete obsolete sdhci-pxa.c

2011-07-20T21:20:51+00:00

Delete obsolete sdhci-pxa.c, which was previously shared amongst the
entire PXA series.  Instead we now use sdhci-pxav3.c for mmp2 and
sdhci-pxav2.c for pxa9xx.

Signed-off-by: Zhangfei Gao 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: host: split up sdhci-pxa, create sdhci-pxav2.c

2011-07-20T21:20:50+00:00

sdhci-pltfm driver for PXAV2 SoCs, such as pxa910.

Signed-off-by: Zhangfei Gao 
Signed-off-by: Jun Nie 
Signed-off-by: Qiming Wu 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: host: split up sdhci-pxa, create sdhci-pxav3.c

2011-07-20T21:20:49+00:00

sdhci-pltfm driver for PXAV3 SoCs, such as MMP2.

Signed-off-by: Zhangfei Gao 
Signed-off-by: Philip Rakity 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: sdhci: change sdhci-pltfm into a module

2011-07-20T21:20:49+00:00

There are a couple of problems left from the sdhci pltfm and OF
consolidation changes.

* When building more than one sdhci-pltfm based drivers in the same
  image, linker will give multiple definition error on the sdhci-pltfm
  helper functions.  For example right now, building sdhci-of-esdhc
  and sdhci-of-hlwd together is a valid combination from Kconfig view.

* With the current build method, there is error with building the
  drivers as module, but module installation fails with modprobe.

The patch fixes above problems by changing sdhci-pltfm into a module.
To avoid EXPORT_SYMBOL on so many big endian IO accessors, it moves
these accessors into sdhci-pltfm.h as the 'static inline' functions.
As a result, sdhci.h needs to be included in sdhci-pltfm.h, and in
turn can be removed from individual drivers which already include
sdhci-pltfm.h.

Signed-off-by: Shawn Guo 
Signed-off-by: Chris Ball

mmc: sdhci: make sdhci-of device drivers self registered

2011-07-20T21:20:47+00:00

The patch turns the sdhci-of-core common stuff into helper functions
added into sdhci-pltfm.c, and makes sdhci-of device drviers self
registered using the same pair of .probe and .remove used by
sdhci-pltfm device drivers.

As a result, sdhci-of-core.c and sdhci-of.h can be eliminated with
those common things merged into sdhci-pltfm.c and sdhci-pltfm.h
respectively.

Signed-off-by: Shawn Guo 
Acked-by: Anton Vorontsov 
Reviewed-by: Wolfram Sang 
Signed-off-by: Chris Ball

mmc: sdhci: make sdhci-pltfm device drivers self registered

2011-07-20T21:16:06+00:00

The patch turns the common stuff in sdhci-pltfm.c into functions, and
add device drivers their own .probe and .remove which in turn call
into the common functions, so that those sdhci-pltfm device drivers
register itself and keep all device specific things away from common
sdhci-pltfm file.

Signed-off-by: Shawn Guo 
Reviewed-by: Grant Likely 
Acked-by: Arnd Bergmann 
Acked-by: Anton Vorontsov 
Signed-off-by: Chris Ball

mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver

2011-05-25T03:54:00+00:00

Add a driver for Elan Digital System's VUB300 chip which is a USB
connected SDIO/SDmem/MMC host controller.  A VUB300 chip enables a USB 2.0
or USB 1.1 connected host computer to use SDIO/SD/MMC cards without the
need for a directly connected, for example via PCI, SDIO host controller.

Signed-off-by: Anthony F Olech 
[cjb: various punctuation and style fixes]
Tested-by: Chris Ball 
Signed-off-by: Chris Ball

mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver

2011-03-25T14:39:23+00:00

On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO
MFD cell driver. Now that the tmio_mmc driver has been split into a
core and a separate MFD glue, we can support SDHI natively without the
need to emulate an MFD controller. This also allows to support systems
with an on-SoC SDHI controller and a separate MFD with a TMIO core.

Signed-off-by: Guennadi Liakhovetski 
Acked-by: Paul Mundt 
Signed-off-by: Chris Ball