linux-stable.git/drivers/mmc/core, branch v5.4.2

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

2019-09-19T20:27:23+00:00

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...

mmc: queue: Fix bigger segments usage

2019-09-12T12:14:09+00:00

The commit 38c38cb73223 ("mmc: queue: use bigger segments if DMA MAP
layer can merge the segments") always enables the bugger segments
if DMA MAP layer can merge the segments, but some controllers (SDHCI)
have strictly limitation about the segments size, and then the commit
breaks on the controllers.

To fix the issue, this patch adds a new flag MMC_CAP2_MERGE_CAPABLE
into the struct mmc_host and the bigger segments usage is disabled
as default.

Reported-by: Thierry Reding 
Fixes: 38c38cb73223 ("mmc: queue: use bigger segments if DMA MAP layer can merge the segments")
Signed-off-by: Yoshihiro Shimoda 
Acked-by: Ulf Hansson 
Signed-off-by: Christoph Hellwig

mmc: core: Fixup processing of SDIO IRQs during system suspend/resume

2019-09-11T14:10:19+00:00

System suspend/resume of SDIO cards, with SDIO IRQs enabled and when using
MMC_CAP2_SDIO_IRQ_NOTHREAD is unfortunate still suffering from a fragile
behaviour. Some problems have been taken care of so far, but more issues
remains.

For example, calling the ->ack_sdio_irq() callback to let host drivers
re-enable the SDIO IRQs is a bad idea, unless the IRQ have been consumed,
which may not be the case during system suspend/resume. This may lead to
that a host driver re-signals the same SDIO IRQ over and over again,
causing a storm of IRQs and gives a ping-pong effect towards the
sdio_irq_work().

Moreover, calling the ->enable_sdio_irq() callback at system resume to
re-enable already enabled SDIO IRQs for the host, causes the runtime PM
count for some host drivers to become in-balanced. This then leads to the
host to remain runtime resumed, no matter if it's needed or not.

To fix these problems, let's check if process_sdio_pending_irqs() actually
consumed the SDIO IRQ, before we continue to ack the IRQ by invoking the
->ack_sdio_irq() callback.

Additionally, there should be no need to re-enable SDIO IRQs as the host
driver already knows if they were enabled at system suspend, thus also
whether it needs to re-enable them at system resume. For this reason, drop
the call to ->enable_sdio_irq() during system resume.

In regards to these changes there is yet another issue, which is when there
is an SDIO IRQ being signaled by the host driver, but after the SDIO card
has been system suspended. Currently these IRQs are just thrown away, while
we should at least make sure to try to consume them when the SDIO card has
been system resumed. Fix this by queueing a sdio_irq_work() after we system
resumed the SDIO card.

Tested-by: Matthias Kaehlcke 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Signed-off-by: Ulf Hansson

mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend

2019-09-11T14:10:18+00:00

To make sure SDIO func drivers behaves correctly during system
suspend/resume, let add a WARN_ON in case the condition is a non-powered
SDIO card and there are some SDIO IRQs still being claimed.

Tested-by: Matthias Kaehlcke 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Ulf Hansson

mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory

2019-09-11T14:10:18+00:00

For the MMC_CAP2_SDIO_IRQ_NOTHREAD case and when using sdio_signal_irq(),
the ->ack_sdio_irq() is already mandatory, which was not the case for those
host drivers that called sdio_run_irqs() directly.

As there are no longer any drivers calling sdio_run_irqs(), let's clarify
the code by dropping the unnecessary check and explicitly state that the
callback is mandatory in the header file.

Tested-by: Matthias Kaehlcke 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Signed-off-by: Ulf Hansson

mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD

2019-09-11T14:10:18+00:00

The sdio_irq_pending flag is used to let host drivers indicate that it has
signaled an IRQ. If that is the case and we only have a single SDIO func
that have claimed an SDIO IRQ, our assumption is that we can avoid reading
the SDIO_CCCR_INTx register and just call the SDIO func irq handler
immediately. This makes sense, but the flag is set/cleared in a somewhat
messy order, let's fix that up according to below.

First, the flag is currently set in sdio_run_irqs(), which is executed as a
work that was scheduled from sdio_signal_irq(). To make it more implicit
that the host have signaled an IRQ, let's instead immediately set the flag
in sdio_signal_irq(). This also makes the behavior consistent with host
drivers that uses the legacy, mmc_signal_sdio_irq() API. This have no
functional impact, because we don't expect host drivers to call
sdio_signal_irq() until after the work (sdio_run_irqs()) have been executed
anyways.

Second, currently we never clears the flag when using the sdio_run_irqs()
work, but only when using the sdio_irq_thread(). Let make the behavior
consistent, by moving the flag to be cleared inside the common
process_sdio_pending_irqs() function. Additionally, tweak the behavior of
the flag slightly, by avoiding to clear it unless we processed the SDIO
IRQ. The purpose with this at this point, is to keep the information about
whether there have been an SDIO IRQ signaled by the host, so at system
resume we can decide to process it without reading the SDIO_CCCR_INTx
register.

Tested-by: Matthias Kaehlcke 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Signed-off-by: Ulf Hansson

mmc: core: Move code to get pending SDIO IRQs to a function

2019-09-11T14:10:18+00:00

To improve code quality, let's move the code that gets pending SDIO IRQs
from process_sdio_pending_irqs() into a dedicated function.

Signed-off-by: Matthias Kaehlcke 
[Ulf: Converted function into static]
Tested-by: Matthias Kaehlcke 
Signed-off-by: Ulf Hansson 
Reviewed-by: Douglas Anderson 
Signed-off-by: Ulf Hansson

Revert "mmc: core: do not retry CMD6 in __mmc_switch()"

2019-09-03T14:53:28+00:00

Turns out the commit 3a0681c7448b ("mmc: core: do not retry CMD6 in
__mmc_switch()") breaks initialization of a Toshiba THGBMNG5 eMMC card,
when using the meson-gx-mmc.c driver on a custom board based on Amlogic
A113D.

The CMD6 that switches the card into HS200 mode is then one that fails and
according to the below printed messages from the log:

[    1.648951] mmc0: mmc_select_hs200 failed, error -84
[    1.648988] mmc0: error -84 whilst initialising MMC card

After some analyze, it turns out that adding a delay of ~5ms inside
mmc_select_bus_width() but after mmc_compare_ext_csds() has been executed,
also fixes the problem. Adding yet some more debug code, trying to figure
out if potentially the card could be in a busy state, both by using CMD13
and ->card_busy() ops concluded that this was not the case.

Therefore, let's simply revert the commit that dropped support for retrying
of CMD6, as this also fixes the problem.

Fixes: 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kaisrlik 
Signed-off-by: Ulf Hansson

mmc: queue: use bigger segments if DMA MAP layer can merge the segments

2019-09-03T06:32:58+00:00

When the max_segs of a mmc host is smaller than 512, the mmc
subsystem tries to use 512 segments if DMA MAP layer can merge
the segments, and then the mmc subsystem exposes such information
to the block layer by using blk_queue_can_use_dma_map_merging().

Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Ulf Hansson 
Reviewed-by: Simon Horman 
Signed-off-by: Christoph Hellwig

mmc: core: Fix init of SD cards reporting an invalid VDD range

2019-08-30T07:17:53+00:00

The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.

When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.

Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.

Cc: stable@vger.kernel.org
Reported-by: Philip Langdale 
Signed-off-by: Ulf Hansson 
Reviewed-by: Philip Langdale 
Tested-by: Philip Langdale 
Tested-by: Manuel Presnitz