linux-stable.git/drivers/mmc/core, branch linux-5.6.y Linux kernel stable tree mmc: sdio: Fix several potential memory leaks in mmc_sdio_init_card() 2020-06-17T14:42:08+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-04-30T09:16:38+00:00 84d71e449d554ccb2b80ef1a08a6cfd30d1e2988 commit a94a59f43749b4f8cd81b8be87c95f9ef898d19d upstream. Over the years, the code in mmc_sdio_init_card() has grown to become quite messy. Unfortunate this has also lead to that several paths are leaking memory in form of an allocated struct mmc_card, which includes additional data, such as initialized struct device for example. Unfortunate, it's a too complex task find each offending commit. Therefore, this change fixes all memory leaks at once. Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-3-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a94a59f43749b4f8cd81b8be87c95f9ef898d19d upstream.

Over the years, the code in mmc_sdio_init_card() has grown to become quite
messy. Unfortunate this has also lead to that several paths are leaking
memory in form of an allocated struct mmc_card, which includes additional
data, such as initialized struct device for example.

Unfortunate, it's a too complex task find each offending commit. Therefore,
this change fixes all memory leaks at once.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200430091640.455-3-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: sdio: Fix potential NULL pointer error in mmc_sdio_init_card() 2020-06-17T14:42:08+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-04-30T09:16:37+00:00 e0f61e3ab2d8d99f92dac85615b0e962121d6d24 commit f04086c225da11ad16d7f9a2fbca6483ab16dded upstream. During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying. However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this. Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f04086c225da11ad16d7f9a2fbca6483ab16dded upstream.

During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I
specific initialization, which leads to removal of the previously allocated
card. A new card is then re-allocated while retrying.

However, in one of the corresponding error paths we may end up to remove an
already removed card, which likely leads to a NULL pointer exception. So,
let's fix this.

Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: block: Fix use-after-free issue for rpmb 2020-06-03T06:23:18+00:00 Peng Hao richard.peng@oppo.com 2020-05-22T09:29:25+00:00 0d763d4d2aa195a84cfcdc618e2ef9da31d924c3 [ Upstream commit 202500d21654874aa03243e91f96de153ec61860 ] The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent. Fixes: 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ") Signed-off-by: Peng Hao <richard.peng@oppo.com> Cc: stable@vger.kernel.org [Uffe: Fixed up mangled patch and updated commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 202500d21654874aa03243e91f96de153ec61860 ]

The data structure member “rpmb->md” was passed to a call of the function
“mmc_blk_put” after a call of the function “put_device”. Reorder these
function calls to keep the data accesses consistent.

Fixes: 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ")
Signed-off-by: Peng Hao <richard.peng@oppo.com>
Cc: stable@vger.kernel.org
[Uffe: Fixed up mangled patch and updated commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mmc: block: Fix request completion in the CQE timeout path 2020-05-20T06:22:16+00:00 Adrian Hunter adrian.hunter@intel.com 2020-05-08T06:22:27+00:00 32107a1681dfba581222f7850af6a15ee8d3c39f [ Upstream commit c077dc5e0620508a29497dac63a2822324ece52a ] First, it should be noted that the CQE timeout (60 seconds) is substantial so a CQE request that times out is really stuck, and the race between timeout and completion is extremely unlikely. Nevertheless this patch fixes an issue with it. Commit ad73d6feadbd7b ("mmc: complete requests from ->timeout") preserved the existing functionality, to complete the request. However that had only been necessary because the block layer timeout handler had been marking the request to prevent it from being completed normally. That restriction was removed at the same time, the result being that a request that has gone will have been completed anyway. That is, the completion was unnecessary. At the time, the unnecessary completion was harmless because the block layer would ignore it, although that changed in kernel v5.0. Note for stable, this patch will not apply cleanly without patch "mmc: core: Fix recursive locking issue in CQE recovery path" Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: ad73d6feadbd7b ("mmc: complete requests from ->timeout") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c077dc5e0620508a29497dac63a2822324ece52a ]

First, it should be noted that the CQE timeout (60 seconds) is substantial
so a CQE request that times out is really stuck, and the race between
timeout and completion is extremely unlikely. Nevertheless this patch
fixes an issue with it.

Commit ad73d6feadbd7b ("mmc: complete requests from ->timeout")
preserved the existing functionality, to complete the request.
However that had only been necessary because the block layer
timeout handler had been marking the request to prevent it from being
completed normally. That restriction was removed at the same time, the
result being that a request that has gone will have been completed anyway.
That is, the completion was unnecessary.

At the time, the unnecessary completion was harmless because the block
layer would ignore it, although that changed in kernel v5.0.

Note for stable, this patch will not apply cleanly without patch "mmc:
core: Fix recursive locking issue in CQE recovery path"

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: ad73d6feadbd7b ("mmc: complete requests from ->timeout")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mmc: core: Fix recursive locking issue in CQE recovery path 2020-05-20T06:22:16+00:00 Sarthak Garg sartgarg@codeaurora.org 2020-05-07T16:15:33+00:00 6b7b9d3faac9047082f5137340f5c4d2d8d59dcc [ Upstream commit 39a22f73744d5baee30b5f134ae2e30b668b66ed ] Consider the following stack trace -001|raw_spin_lock_irqsave -002|mmc_blk_cqe_complete_rq -003|__blk_mq_complete_request(inline) -003|blk_mq_complete_request(rq) -004|mmc_cqe_timed_out(inline) -004|mmc_mq_timed_out mmc_mq_timed_out acquires the queue_lock for the first time. The mmc_blk_cqe_complete_rq function also tries to acquire the same queue lock resulting in recursive locking where the task is spinning for the same lock which it has already acquired leading to watchdog bark. Fix this issue with the lock only for the required critical section. Cc: <stable@vger.kernel.org> Fixes: 1e8e55b67030 ("mmc: block: Add CQE support") Suggested-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 39a22f73744d5baee30b5f134ae2e30b668b66ed ]

Consider the following stack trace

-001|raw_spin_lock_irqsave
-002|mmc_blk_cqe_complete_rq
-003|__blk_mq_complete_request(inline)
-003|blk_mq_complete_request(rq)
-004|mmc_cqe_timed_out(inline)
-004|mmc_mq_timed_out

mmc_mq_timed_out acquires the queue_lock for the first
time. The mmc_blk_cqe_complete_rq function also tries to acquire
the same queue lock resulting in recursive locking where the task
is spinning for the same lock which it has already acquired leading
to watchdog bark.

Fix this issue with the lock only for the required critical section.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Suggested-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mmc: core: Check request type before completing the request 2020-05-20T06:22:15+00:00 Veerabhadrarao Badiganti vbadigan@codeaurora.org 2020-05-06T14:34:02+00:00 abc14656136abceb1d0c73c64ba14c070c529d7d [ Upstream commit e6bfb1bf00852b55f4c771f47ae67004c04d3c87 ] In the request completion path with CQE, request type is being checked after the request is getting completed. This is resulting in returning the wrong request type and leading to the IO hang issue. ASYNC request type is getting returned for DCMD type requests. Because of this mismatch, mq->cqe_busy flag is never getting cleared and the driver is not invoking blk_mq_hw_run_queue. So requests are not getting dispatched to the LLD from the block layer. All these eventually leading to IO hang issues. So, get the request type before completing the request. Cc: <stable@vger.kernel.org> Fixes: 1e8e55b67030 ("mmc: block: Add CQE support") Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e6bfb1bf00852b55f4c771f47ae67004c04d3c87 ]

In the request completion path with CQE, request type is being checked
after the request is getting completed. This is resulting in returning
the wrong request type and leading to the IO hang issue.

ASYNC request type is getting returned for DCMD type requests.
Because of this mismatch, mq->cqe_busy flag is never getting cleared
and the driver is not invoking blk_mq_hw_run_queue. So requests are not
getting dispatched to the LLD from the block layer.

All these eventually leading to IO hang issues.
So, get the request type before completing the request.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command 2020-03-12T12:36:55+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-03-11T09:20:36+00:00 18d200460cd73636d4f20674085c39e32b4e0097 The busy timeout for the CMD5 to put the eMMC into sleep state, is specific to the card. Potentially the timeout may exceed the host->max_busy_timeout. If that becomes the case, mmc_sleep() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The busy timeout for the CMD5 to put the eMMC into sleep state, is specific
to the card. Potentially the timeout may exceed the host->max_busy_timeout.
If that becomes the case, mmc_sleep() converts from using an R1B response
to an R1 response, as to prevent the host from doing HW busy detection.

However, it has turned out that some hosts requires an R1B response no
matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note
that, if the R1B gets enforced, the host becomes fully responsible of
managing the needed busy timeout, in one way or the other.

Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard 2020-03-11T15:11:34+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-03-10T13:43:00+00:00 43cc64e5221cc6741252b64bc4531dd1eefb733d The busy timeout that is computed for each erase/trim/discard operation, can become quite long and may thus exceed the host->max_busy_timeout. If that becomes the case, mmc_do_erase() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The busy timeout that is computed for each erase/trim/discard operation,
can become quite long and may thus exceed the host->max_busy_timeout. If
that becomes the case, mmc_do_erase() converts from using an R1B response
to an R1 response, as to prevent the host from doing HW busy detection.

However, it has turned out that some hosts requires an R1B response no
matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note
that, if the R1B gets enforced, the host becomes fully responsible of
managing the needed busy timeout, in one way or the other.

Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Allow host controllers to require R1B for CMD6 2020-03-11T15:10:36+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-03-10T11:49:43+00:00 1292e3efb149ee21d8d33d725eeed4e6b1ade963 It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this. In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
It has turned out that some host controllers can't use R1B for CMD6 and
other commands that have R1B associated with them. Therefore invent a new
host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.

In __mmc_switch(), let's check the flag and use it to prevent R1B responses
from being converted into R1. Note that, this also means that the host are
on its own, when it comes to manage the busy timeout.

Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() 2020-01-24T11:17:05+00:00 Ulf Hansson ulf.hansson@linaro.org 2020-01-22T14:27:47+00:00 533a6cfe08f96a7b5c65e06d20916d552c11b256 All callers of __mmc_switch() should now be specifying a valid timeout for the CMD6 command. However, just to be sure, let's print a warning and default to use the generic_cmd6_time in case the provided timeout_ms argument is zero. In this context, let's also simplify some of the corresponding code and clarify some related comments. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org 
All callers of __mmc_switch() should now be specifying a valid timeout for
the CMD6 command. However, just to be sure, let's print a warning and
default to use the generic_cmd6_time in case the provided timeout_ms
argument is zero.

In this context, let's also simplify some of the corresponding code and
clarify some related comments.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org