linux-stable.git/drivers/misc, branch v6.1.129 Linux kernel stable tree misc: fastrpc: Fix copy buffer page size 2025-02-21T12:49:52+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2025-01-10T13:42:39+00:00 c56ba3ea8e3c9a69a992aad18f7a65e43e51d623 commit e966eae72762ecfdbdb82627e2cda48845b9dd66 upstream. For non-registered buffer, fastrpc driver copies the buffer and pass it to the remote subsystem. There is a problem with current implementation of page size calculation which is not considering the offset in the calculation. This might lead to passing of improper and out-of-bounds page size which could result in memory issue. Calculate page start and page end using the offset adjusted address instead of absolute address. Fixes: 02b45b47fbe8 ("misc: fastrpc: fix remote page size calculation") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e966eae72762ecfdbdb82627e2cda48845b9dd66 upstream.

For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address.

Fixes: 02b45b47fbe8 ("misc: fastrpc: fix remote page size calculation")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: fastrpc: Fix registered buffer page address 2025-02-21T12:49:52+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2025-01-10T13:42:38+00:00 9c37be4abf7feb9e7bc9e6e6b7b65a24f87ca609 commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream. For registered buffers, fastrpc driver sends the buffer information to remote subsystem. There is a problem with current implementation where the page address is being sent with an offset leading to improper buffer address on DSP. This is leads to functional failures as DSP expects base address in page information and extracts offset information from remote arguments. Mask the offset and pass the base page address to DSP. This issue is observed is a corner case when some buffer which is registered with fastrpc framework is passed with some offset by user and then the DSP implementation tried to read the data. As DSP expects base address and takes care of offsetting with remote arguments, passing an offsetted address will result in some unexpected data read in DSP. All generic usecases usually pass the buffer as it is hence is problem is not usually observed. If someone tries to pass offsetted buffer and then tries to compare data at HLOS and DSP end, then the ambiguity will be observed. Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream.

For registered  buffers, fastrpc driver sends the buffer information
to remote subsystem. There is a problem with current implementation
where the page address is being sent with an offset leading to
improper buffer address on DSP. This is leads to functional failures
as DSP expects base address in page information and extracts offset
information from remote arguments. Mask the offset and pass the base
page address to DSP.

This issue is observed is a corner case when some buffer which is registered
with fastrpc framework is passed with some offset by user and then the DSP
implementation tried to read the data. As DSP expects base address and takes
care of offsetting with remote arguments, passing an offsetted address will
result in some unexpected data read in DSP.

All generic usecases usually pass the buffer as it is hence is problem is
not usually observed. If someone tries to pass offsetted buffer and then
tries to compare data at HLOS and DSP end, then the ambiguity will be observed.

Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: fastrpc: Deregister device nodes properly in error scenarios 2025-02-21T12:49:52+00:00 Anandu Krishnan E quic_anane@quicinc.com 2025-01-10T13:42:37+00:00 894efd31d02a4d432ddc1b87420e0a20fbbde4ac commit 637c20002dc8c347001292664055bfbf56544ec6 upstream. During fastrpc_rpmsg_probe, if secure device node registration succeeds but non-secure device node registration fails, the secure device node deregister is not called during error cleanup. Add proper exit paths to ensure proper cleanup in case of error. Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 637c20002dc8c347001292664055bfbf56544ec6 upstream.

During fastrpc_rpmsg_probe, if secure device node registration
succeeds but non-secure device node registration fails, the secure
device node deregister is not called during error cleanup. Add proper
exit paths to ensure proper cleanup in case of error.

Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support")
Cc: stable@kernel.org
Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/card_reader/rtsx_usb: Restore interrupt based detection 2025-02-21T12:49:26+00:00 Sean Rhodes sean@starlabs.systems 2024-11-19T08:58:15+00:00 93a56dbe12327e73c95ce8cd991c1335aebc8e1c commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream. This commit reintroduces interrupt-based card detection previously used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code"). Reintroducing this mechanism fixes presence detection for certain card readers, which with the current driver, will taken approximately 20 seconds to enter S3 as `mmc_rescan` has to be frozen. Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code") Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream.

This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit
00d8521dcd23 ("staging: remove rts5139 driver code").

Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.

Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code")
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config 2025-01-17T12:34:44+00:00 Rengarajan S rengarajan.s@microchip.com 2024-12-05T13:36:26+00:00 d26b9f0b999cc00e83fcbefe6069c618dfbe1b54 commit c7a5378a0f707686de3ddb489f1653c523bb7dcc upstream. Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set config. Upper level driver checks for -ENOTSUPP. Because of the return code mismatch, the ioctls from userspace fail. Resolve the issue by passing -ENOTSUPP during unsupported case. Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7a5378a0f707686de3ddb489f1653c523bb7dcc upstream.

Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set
config. Upper level driver checks for -ENOTSUPP. Because of the return
code mismatch, the ioctls from userspace fail. Resolve the issue by
passing -ENOTSUPP during unsupported case.

Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling 2025-01-17T12:34:44+00:00 Rengarajan S rengarajan.s@microchip.com 2024-12-05T13:36:25+00:00 79aef6187e16b2d32307c8ff610e9e04f7f86e1f commit 194f9f94a5169547d682e9bbcc5ae6d18a564735 upstream. Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 194f9f94a5169547d682e9bbcc5ae6d18a564735 upstream.

Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq.

Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle 2024-12-14T18:54:49+00:00 Parker Newman pnewman@connecttech.com 2024-10-02T15:12:33+00:00 80be263f3f453b6e8efc2e5809347dc9ae7c3e29 [ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ]

Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.

The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.

More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.

In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM:	110[A5-A0]	(9 bits)
Read from EEPROM:	0[D15-D0]	(17 bits)

Where:
	110 is the start bit and READ OpCode
	[A5-A0] is the address to read from
	0 is a "dummy bit" preceding the actual data
	[D15-D0] is the actual data.

Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.

However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.

Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: apds990x: Fix missing pm_runtime_disable() 2024-12-14T18:53:53+00:00 Jinjie Ruan ruanjinjie@huawei.com 2024-09-23T03:55:56+00:00 367f7727ae62791b27b71ace26deb9590e0728b6 [ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ] The pm_runtime_disable() is missing in probe error path, so add it to fix it. Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ]

The pm_runtime_disable() is missing in probe error path,
so add it to fix it.

Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: sgi-gru: Don't disable preemption in GRU driver 2024-11-08T15:26:44+00:00 Dimitri Sivanich sivanich@hpe.com 2024-09-19T12:34:50+00:00 b946e7b447427803ee6e01e81feb46c64e0513b2 [ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ] Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich <sivanich@hpe.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ]

Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths.  Remove preempt_disable and
preempt_enable from the GRU driver.

Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
eeprom: digsy_mtc: Fix 93xx46 driver probe failure 2024-09-18T17:23:04+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-05-08T18:46:55+00:00 4b3c279f3090c34dde23e2388af335a39448d9fc [ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ] The update to support other (bigger) types of EEPROMs broke the driver loading due to removal of the default size. Fix this by adding the respective (new) flag to the platform data. Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ]

The update to support other (bigger) types of EEPROMs broke
the driver loading due to removal of the default size.

Fix this by adding the respective (new) flag to the platform data.

Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>