linux-stable.git/drivers/misc, branch v4.19.2

ocxl: Fix access to the AFU Descriptor Data

2018-11-13T19:08:51+00:00

commit 6f8e45f7eb1bee5efdbe4a9cfe4a45627403c5fb upstream.

The AFU Information DVSEC capability is a means to extract common,
general information about all of the AFUs associated with a Function
independent of the specific functionality that each AFU provides.
Write in the AFU Index field allows to access to the descriptor data
for each AFU.

With the current code, we are not able to access to these specific data
when the index >= 1 because we are writing to the wrong location.
All requests to the data of each AFU are pointing to those of the AFU 0,
which could have impacts when using a card with more than one AFU per
function.

This patch fixes the access to the AFU Descriptor Data indexed by the
AFU Info Index field.

Fixes: 5ef3166e8a32 ("ocxl: Driver code for 'generic' opencapi devices")
Cc: stable      # 4.16
Signed-off-by: Christophe Lombard 
Signed-off-by: Greg Kroah-Hartman 

Acked-by: Frederic Barrat 
Acked-by: Andrew Donnellan 
Signed-off-by: Michael Ellerman

signal/GenWQE: Fix sending of SIGKILL

2018-11-13T19:08:45+00:00

commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.

The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another.  It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates.   Neither of which are
guaranteed to be true.

Therefore replace caching the task_struct of the opener with
pid of the openers thread group id.  All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.

Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.

The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV.  The exact same processess
will be killed just with less work, and less confusion.  The work done
by force_sig is really only needed for handling syncrhonous
exceptions.

It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman 
Cc: Frank Haverkamp 
Cc: Joerg-Stephan Vogt 
Cc: Michael Jung 
Cc: Michael Ruettger 
Cc: Kleber Sacilotto de Souza 
Cc: Sebastian Ott 
Cc: Eberhard S. Amann 
Cc: Gabriel Krisman Bertazi 
Cc: Guilherme G. Piccoli 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

VMCI: Resource wildcard match fixed

2018-11-13T19:08:34+00:00

[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]

When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.

Fixes: bc63dedb7d46 ("VMCI: resource object implementation")
Reported-by: Hangbin Liu 
Reviewed-by: Adit Ranadive 
Reviewed-by: Vishnu Dasa 
Signed-off-by: Jorgen Hansen 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

misc: hmc6352: fix potential Spectre v1

2018-09-12T07:31:00+00:00

val is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue
'map' [r]

Fix this by sanitizing val before using it to index map

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Greg Kroah-Hartman

misc: ibmvsm: Fix wrong assignment of return code

2018-09-12T07:31:00+00:00

Currently the assignment is flipped and rc is always 0.

Signed-off-by: Bryant G. Ly 
Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)")
Reviewed-by: Bradley Warrum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

mei: bus: need to unlink client before freeing

2018-09-12T07:14:24+00:00

In case a client fails to connect in mei_cldev_enable(), the
caller won't call the mei_cldev_disable leaving the client
in a linked stated. Upon driver unload the client structure
will be freed in  mei_cl_bus_dev_release(), leaving a stale pointer
on a fail_list.  This will eventually end up in crash
during power down flow in mei_cl_set_disonnected().

RIP:  mei_cl_set_disconnected+0x5/0x260[mei]
Call trace:
mei_cl_all_disconnect+0x22/0x30
mei_reset+0x194/0x250
__synchronize_hardirq+0x43/0x50
_cond_resched+0x15/0x30
mei_me_intr_clear+0x20/0x100
mei_stop+0x76/0xb0
mei_me_shutdown+0x3f/0x80
pci_device_shutdown+0x34/0x60
kernel_restart+0x0e/0x30

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Fixes: 'c110cdb17148 ("mei: bus: make a client pointer always available")'
Cc:  4.10+
Tested-by: Georg Müller 
Signed-off-by: Tomas Winkler 
Signed-off-by: Greg Kroah-Hartman

mei: bus: fix hw module get/put balance

2018-09-12T07:14:24+00:00

In case the device is not connected it doesn't 'get'
hw module and hence should not 'put' it on disable.

Cc:  4.16+
Fixes:'commit 257355a44b99 ("mei: make module referencing local to the bus.c")'
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Tested-by: Georg Müller 
Signed-off-by: Tomas Winkler 
Signed-off-by: Greg Kroah-Hartman

mei: fix use-after-free in mei_cl_write

2018-09-12T07:14:24+00:00

KASAN reports a use-after-free during startup, in mei_cl_write:

    BUG: KASAN: use-after-free in mei_cl_write+0x601/0x870 [mei]
       (drivers/misc/mei/client.c:1770)

This is caused by commit 98e70866aacb ("mei: add support for variable
length mei headers."), which changed the return value from len, to
buf->size. That ends up using a stale buf pointer, because blocking
call, the cb (callback) is deleted in me_cl_complete() function.

However, fortunately, len remains unchanged throughout the function
(and I don't see anything else that would require re-reading buf->size
either), so the fix is to simply revert the change, and return len, as
before.

Fixes: 98e70866aacb ("mei: add support for variable length mei headers.")
CC: Arnd Bergmann 
CC: Greg Kroah-Hartman 
Signed-off-by: John Hubbard 
Signed-off-by: Tomas Winkler 
Signed-off-by: Greg Kroah-Hartman

mei: ignore not found client in the enumeration

2018-09-12T07:14:24+00:00

Some of the ME clients are available only for BIOS operation and are
removed during hand off to an OS. However the removal is not instant.
A client may be visible on the client list when the mei driver requests
for enumeration, while the subsequent request for properties will be
answered with client not found error value. The default behavior
for an error is to perform client reset while this error is harmless and
the link reset should be prevented. This issue started to be visible due to
suspend/resume timing changes. Currently reported only on the Haswell
based system.

Fixes:
[33.564957] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[33.564978] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[33.565270] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000255 60002306 00000200 00004401 00000000 00000010

Cc: 
Reported-by: Heiner Kallweit 
Signed-off-by: Alexander Usyskin 
Signed-off-by: Tomas Winkler 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax

2018-08-26T18:48:42+00:00

Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...