linux-stable.git/drivers/misc, branch v3.18.136

misc: vexpress: Off by one in vexpress_syscfg_exec()

2019-02-20T09:09:07+00:00

commit f8a70d8b889f180e6860cb1f85fed43d37844c5a upstream.

The > comparison should be >= to prevent reading beyond the end of the
func->template[] array.

(The func->template array is allocated in vexpress_syscfg_regmap_init()
and it has func->num_templates elements.)

Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Dan Carpenter 
Acked-by: Sudeep Holla 
Signed-off-by: Greg Kroah-Hartman

genwqe: Fix size check

2019-01-13T09:07:12+00:00

commit fdd669684655c07dacbdb0d753fd13833de69a33 upstream.

Calling the test program genwqe_cksum with the default buffer size of
2MB triggers the following kernel warning on s390:

WARNING: CPU: 30 PID: 9311 at mm/page_alloc.c:3189 __alloc_pages_nodemask+0x45c/0xbe0
CPU: 30 PID: 9311 Comm: genwqe_cksum Kdump: loaded Not tainted 3.10.0-957.el7.s390x #1
task: 00000005e5d13980 ti: 00000005e7c6c000 task.ti: 00000005e7c6c000
Krnl PSW : 0704c00180000000 00000000002780ac (__alloc_pages_nodemask+0x45c/0xbe0)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS: 00000000002932b8 0000000000b73d7c 0000000000000010 0000000000000009
           0000000000000041 00000005e7c6f9b8 0000000000000001 00000000000080d0
           0000000000000000 0000000000b70500 0000000000000001 0000000000000000
           0000000000b70528 00000000007682c0 0000000000277df2 00000005e7c6f9a0
Krnl Code: 000000000027809e: de7195001000	ed	1280(114,%r9),0(%r1)
	   00000000002780a4: a774fead		brc	7,277dfe
	  #00000000002780a8: a7f40001		brc	15,2780aa
	  >00000000002780ac: 92011000		mvi	0(%r1),1
	   00000000002780b0: a7f4fea7		brc	15,277dfe
	   00000000002780b4: 9101c6b6		tm	1718(%r12),1
	   00000000002780b8: a784ff3a		brc	8,277f2c
	   00000000002780bc: a7f4fe2e		brc	15,277d18
Call Trace:
([<0000000000277df2>] __alloc_pages_nodemask+0x1a2/0xbe0)
 [<000000000013afae>] s390_dma_alloc+0xfe/0x310
 [<000003ff8065f362>] __genwqe_alloc_consistent+0xfa/0x148 [genwqe_card]
 [<000003ff80658f7a>] genwqe_mmap+0xca/0x248 [genwqe_card]
 [<00000000002b2712>] mmap_region+0x4e2/0x778
 [<00000000002b2c54>] do_mmap+0x2ac/0x3e0
 [<0000000000292d7e>] vm_mmap_pgoff+0xd6/0x118
 [<00000000002b081c>] SyS_mmap_pgoff+0xdc/0x268
 [<00000000002b0a34>] SyS_old_mmap+0x8c/0xb0
 [<000000000074e518>] sysc_tracego+0x14/0x1e
 [<000003ffacf87dc6>] 0x3ffacf87dc6

turns out the check in __genwqe_alloc_consistent uses "> MAX_ORDER"
while the mm code uses ">= MAX_ORDER". Fix genwqe.

Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger 
Signed-off-by: Frank Haverkamp 
Signed-off-by: Greg Kroah-Hartman

misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data

2018-11-27T15:05:37+00:00

commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream.

After building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from
the function ssc_probe() to the function
.init.text:atmel_ssc_get_driver_data()
The function ssc_probe() references
the function __init atmel_ssc_get_driver_data().
This is often because ssc_probe lacks a __init
annotation or the annotation of atmel_ssc_get_driver_data is wrong.

Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch.

Signed-off-by: Nathan Chancellor 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

signal/GenWQE: Fix sending of SIGKILL

2018-11-22T06:32:43+00:00

commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.

The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another.  It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates.   Neither of which are
guaranteed to be true.

Therefore replace caching the task_struct of the opener with
pid of the openers thread group id.  All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.

Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.

The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV.  The exact same processess
will be killed just with less work, and less confusion.  The work done
by force_sig is really only needed for handling syncrhonous
exceptions.

It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman 
Cc: Frank Haverkamp 
Cc: Joerg-Stephan Vogt 
Cc: Michael Jung 
Cc: Michael Ruettger 
Cc: Kleber Sacilotto de Souza 
Cc: Sebastian Ott 
Cc: Eberhard S. Amann 
Cc: Gabriel Krisman Bertazi 
Cc: Guilherme G. Piccoli 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

cxl: Fix issues when unmapping contexts

2018-11-10T15:39:13+00:00

[ Upstream commit 0712dc7e73e59d79bcead5d5520acf4e9e917e87 ]

An issue was introduced with "cxl: Unmap MMIO regions when detaching a
context" (b123429e6a9e8d03aacf888d23262835f0081448) where closing a
context normally could also unmap the problem state area of other
contexts currently using the AFU.

It was also discovered that after a context's MMIO space had been
unmapped it would read 0s when accessing it, whereas the expected
behaviour was for the access to fail altogether.

In order to address these issues, this patch does two things:

- Forced mmap unmapping is only done when we are forcefully detaching
  all contexts, and not in the normal detach path. Since the normal
  context close path is tied to the file release any mmaps must have
  already been released so we don't need to worry in that case.

- The mmap path now uses a vm_operations_struct with a fault handler.
  The fault handler ensures that the context is in started state,
  otherwise it fails the access attempt with a SIGBUS.

Fixes: b123429e6a9e ("cxl: Unmap MMIO regions when detaching a context")
Signed-off-by: Ian Munsie 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin

tsl2550: fix lux1_input error in low light

2018-10-13T07:09:24+00:00

[ Upstream commit ce054546cc2c26891cefa2f284d90d93b52205de ]

ADC channel 0 photodiode detects both infrared + visible light,
but ADC channel 1 just detects infrared. However, the latter is a bit
more sensitive in that range so complete darkness or low light causes
a error condition in which the chan0 - chan1 is negative that
results in a -EAGAIN.

This patch changes the resulting lux1_input sysfs attribute message from
"Resource temporarily unavailable" to a user-grokable lux value of 0.

Cc: Arnd Bergmann 
Cc: Greg Kroah-Hartman 
Signed-off-by: Matt Ranostay 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ibmasm: don't write out of bounds in read handler

2018-07-22T11:43:23+00:00

commit a0341fc1981a950c1e902ab901e98f60e0e243f3 upstream.

This read handler had a lot of custom logic and wrote outside the bounds of
the provided buffer. This could lead to kernel and userspace memory
corruption. Just use simple_read_from_buffer() with a stack buffer.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn 
Signed-off-by: Greg Kroah-Hartman

mei: remove dev_err message on an unsupported ioctl

2018-04-08T09:49:48+00:00

commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream.

Currently the driver spams the kernel log on unsupported ioctls which is
unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway.
I suspect this was originally for debugging purposes but it really is not
required so remove it.

Signed-off-by: Colin Ian King 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

eeprom: at24: check at24_read/write arguments

2017-12-05T10:20:46+00:00

commit d9bcd462daf34aebb8de9ad7f76de0198bb5a0f0 upstream.

So far we completely rely on the caller to provide valid arguments.
To be on the safe side perform an own sanity check.

Signed-off-by: Heiner Kallweit 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.

2017-07-27T22:03:25+00:00

commit 62e62ffd95539b9220894a7900a619e0f3ef4756 upstream.

The enclosure_add_device() function should fail if it can't create the
relevant sysfs links.

Signed-off-by: Maurizio Lombardi 
Tested-by: Douglas Miller 
Acked-by: James Bottomley 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman