linux-stable.git/drivers/misc/vmw_vmci, branch linux-3.13.y

vmw_vmci: Convert driver to use get_user_pages_fast()

2013-10-06T01:04:55+00:00

Convert vmci_host_setup_notify() and qp_host_get_user_memory() to use
get_user_pages_fast() instead of get_user_pages(). Note that
qp_host_get_user_memory() was using mmap_sem for writing without an
apparent reason.

CC: Arnd Bergmann 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

VMCI: fix to pass correct device identity to free_irq()

2013-09-26T20:47:36+00:00

free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.

Signed-off-by: Wei Yongjun 
Acked-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

VMCI: Add support for virtual IOMMU

2013-08-28T04:42:12+00:00

This patch adds support for virtual IOMMU to the vmci module.  We switch
to DMA consistent mappings for guest queuepair and doorbell pages that
are passed to the device.  We still allocate each page individually,
since there's no guarantee that we'll get a contiguous block of physical
for an entire queuepair (especially since we allow up to 128 MiB!).

Also made the split between guest and host in the kernelIf struct much
clearer.  Now it's obvious which fields are which.

Acked-by: George Zhang 
Acked-by: Aditya Sarwade 
Signed-off-by: Andy King 
Signed-off-by: Greg Kroah-Hartman

VMCI: Remove non-blocking/pinned queuepair support

2013-08-28T04:42:12+00:00

We added this for a special case that doesn't exist on Linux.  Remove
the non-blocking/pinned queuepair code and simplify the driver in
preparation for adding virtual IOMMU support.

Acked-by: Aditya Sarwade 
Signed-off-by: Andy King 
Signed-off-by: Greg Kroah-Hartman

Hoist memcpy_fromiovec/memcpy_toiovec into lib/

2013-05-20T00:54:22+00:00

ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined!

That function is only present with CONFIG_NET.  Turns out that
crypto/algif_skcipher.c also uses that outside net, but it actually
needs sockets anyway.

In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added
CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist
that function and revert that commit too.

socket.h already includes uio.h, so no callers need updating; trying
only broke things fo x86_64 randconfig (thanks Fengguang!).

Reported-by: Randy Dunlap 
Acked-by: David S. Miller 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Rusty Russell

misc/vmw_vmci: Add dependency on CONFIG_NET

2013-04-03T18:53:39+00:00

Building the vmw_vmci driver with CONFIG_NET undefined results in:

drivers/built-in.o: In function `__qp_memcpy_from_queue.isra.13':
vmci_queue_pair.c:(.text+0x1671a8): undefined reference to `memcpy_toiovec'
drivers/built-in.o: In function `__qp_memcpy_to_queue.isra.14':
vmci_queue_pair.c:(.text+0x167341): undefined reference to `memcpy_fromiovec'
make[1]: [vmlinux] Error 1 (ignored)

since memcpy_toiovec and memcpy_fromiovec are defined in the networking code.
Add the missing dependency.

Signed-off-by: Guenter Roeck 
Acked-by: Randy Dunlap 
Signed-off-by: Greg Kroah-Hartman

VMCI: Fix process-to-process DRGAMs.

2013-03-15T19:58:12+00:00

When sending between processes, we always schedule a work item.  Our work info
struct has the message embedded in the middle, which means that we end up
overwriting subsequent fields when we copy the (variable-length) message into
it.  Move it to the end of the struct.

Acked-by: Dmitry Torokhov 
Signed-off-by: Andy King 
Signed-off-by: Greg Kroah-Hartman

hlist: drop the node parameter from iterators

2013-02-28T03:10:24+00:00

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin 
Acked-by: Paul E. McKenney 
Signed-off-by: Sasha Levin 
Cc: Wu Fengguang 
Cc: Marcelo Tosatti 
Cc: Gleb Natapov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers, vmci: Fix build error

2013-01-25T20:22:46+00:00

We can't rely on vmalloc.h being included by other included files because
under some configs it is possible for the build to fail:

drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_free_queue':
drivers/misc/vmw_vmci/vmci_queue_pair.c:270: error: implicit declaration of function 'vunmap'
drivers/misc/vmw_vmci/vmci_queue_pair.c:277: error: implicit declaration of function 'vfree'
drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_alloc_queue':
drivers/misc/vmw_vmci/vmci_queue_pair.c:302: error: implicit declaration of function 'vmalloc'
drivers/misc/vmw_vmci/vmci_queue_pair.c:302: warning: assignment makes pointer from integer without a cast
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: implicit declaration of function 'vmap'
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: 'VM_MAP' undeclared (first use in this function)
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: (Each undeclared identifier is reported only once
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: for each function it appears in.)
drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_host_map_queues':
drivers/misc/vmw_vmci/vmci_queue_pair.c:843: error: 'VM_MAP' undeclared (first use in this function)

Fix the build by directly including vmalloc.h.

Signed-off-by: David Rientjes 
Cc: George Zhang 
Cc: Andy King 
Cc: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

VMCI: Fix broken context ID retrieval

2013-01-22T17:29:26+00:00

I'm an idiot.  The context ID can be a really large unsigned number, which
means it'll appear negative as an int.  So actually the right fix here is just
to set it regardless of the returned value (but only for this particular
hypercall; normally we would check it).

Acked-by: Dmitry Torokhov 
Signed-off-by: Andy King 
Signed-off-by: Greg Kroah-Hartman