linux-stable.git/drivers/misc/vmw_vmci/vmci_queue_pair.c, branch linux-4.6.y Linux kernel stable tree mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros 2016-04-04T17:41:08+00:00 Kirill A. Shutemov kirill.shutemov@linux.intel.com 2016-04-01T12:29:47+00:00 09cbfeaf1a5a67bfb3201e0c83c810cecb2efa5a PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
VMCI: Guard against overflow in queue pair allocation 2015-03-25T10:32:15+00:00 Jorgen Hansen jhansen@vmware.com 2015-03-02T16:19:11+00:00 aa6467f190d32b263f7144239c89c63c922d9ff8 The current maximum size of a queue in a queue pair is 128 MB. If we increase that in the future, the queue pair allocation routines may run into overflow issues. This change adds additional checks to guard against this. Acked-by: Andy King <acking@vmware.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The current maximum size of a queue in a queue pair is 128 MB. If
we increase that in the future, the queue pair allocation routines
may run into overflow issues. This change adds additional checks
to guard against this.

Acked-by: Andy King <acking@vmware.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/vmw_vmci: Show correct get_user_pages_fast upon failure 2015-03-25T10:32:15+00:00 Davidlohr Bueso dave@stgolabs.net 2015-02-17T22:29:21+00:00 bf1361211dd842659b5b882390de687426f3471a As of 240ddd495a9 (vmw_vmci: Convert driver to use get_user_pages_fast()) we no longer user get_user_pages(), thus update the warning. Also convert to pr_debug, which is a more appropriate level of logging. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
As of 240ddd495a9 (vmw_vmci: Convert driver to use get_user_pages_fast())
we no longer user get_user_pages(), thus update the warning.

Also convert to pr_debug, which is a more appropriate level of logging.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmci: propagate msghdr all way down to __qp_memcpy_to_queue() 2015-02-04T06:34:14+00:00 Al Viro viro@zeniv.linux.org.uk 2014-11-28T00:52:04+00:00 4c946d9c11d173c2ea6b9081b248f8072e6b46f1 Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
Switch from passing msg->iov_iter.iov to passing msg itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vmci: propagate msghdr all way down to __qp_memcpy_from_queue() 2014-12-09T21:28:23+00:00 Al Viro viro@zeniv.linux.org.uk 2014-11-25T00:32:50+00:00 d838df2e5dcbb6ed4d82854869e9a30f9aeef6da ... and switch it to memcpy_to_msg() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
... and switch it to memcpy_to_msg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vmw_vmci: Convert driver to use get_user_pages_fast() 2013-10-06T01:04:55+00:00 Jan Kara jack@suse.cz 2013-10-02T14:27:47+00:00 240ddd495a9e72073d11b1b7c2ec9ea14e7015cb Convert vmci_host_setup_notify() and qp_host_get_user_memory() to use get_user_pages_fast() instead of get_user_pages(). Note that qp_host_get_user_memory() was using mmap_sem for writing without an apparent reason. CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Convert vmci_host_setup_notify() and qp_host_get_user_memory() to use
get_user_pages_fast() instead of get_user_pages(). Note that
qp_host_get_user_memory() was using mmap_sem for writing without an
apparent reason.

CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMCI: Add support for virtual IOMMU 2013-08-28T04:42:12+00:00 Andy King acking@vmware.com 2013-08-23T16:22:14+00:00 6d6dfb4f4aa9ee352a199b5379942350bdd26e64 This patch adds support for virtual IOMMU to the vmci module. We switch to DMA consistent mappings for guest queuepair and doorbell pages that are passed to the device. We still allocate each page individually, since there's no guarantee that we'll get a contiguous block of physical for an entire queuepair (especially since we allow up to 128 MiB!). Also made the split between guest and host in the kernelIf struct much clearer. Now it's obvious which fields are which. Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds support for virtual IOMMU to the vmci module.  We switch
to DMA consistent mappings for guest queuepair and doorbell pages that
are passed to the device.  We still allocate each page individually,
since there's no guarantee that we'll get a contiguous block of physical
for an entire queuepair (especially since we allow up to 128 MiB!).

Also made the split between guest and host in the kernelIf struct much
clearer.  Now it's obvious which fields are which.

Acked-by: George Zhang <georgezhang@vmware.com>
Acked-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Andy King <acking@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMCI: Remove non-blocking/pinned queuepair support 2013-08-28T04:42:12+00:00 Andy King acking@vmware.com 2013-08-23T16:22:13+00:00 45412befe8fee657effc15112af05ca9dbea61fc We added this for a special case that doesn't exist on Linux. Remove the non-blocking/pinned queuepair code and simplify the driver in preparation for adding virtual IOMMU support. Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We added this for a special case that doesn't exist on Linux.  Remove
the non-blocking/pinned queuepair code and simplify the driver in
preparation for adding virtual IOMMU support.

Acked-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Andy King <acking@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hoist memcpy_fromiovec/memcpy_toiovec into lib/ 2013-05-20T00:54:22+00:00 Rusty Russell rusty@rustcorp.com.au 2013-05-16T23:35:21+00:00 d2f83e9078b8114e3b9d09082856c1aac299aa37 ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 
ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined!

That function is only present with CONFIG_NET.  Turns out that
crypto/algif_skcipher.c also uses that outside net, but it actually
needs sockets anyway.

In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added
CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist
that function and revert that commit too.

socket.h already includes uio.h, so no callers need updating; trying
only broke things fo x86_64 randconfig (thanks Fengguang!).

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
drivers, vmci: Fix build error 2013-01-25T20:22:46+00:00 David Rientjes rientjes@google.com 2013-01-24T22:49:31+00:00 f6dcf8e747a0723ace5275334bacfcd88ab39333 We can't rely on vmalloc.h being included by other included files because under some configs it is possible for the build to fail: drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_free_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:270: error: implicit declaration of function 'vunmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:277: error: implicit declaration of function 'vfree' drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_alloc_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:302: error: implicit declaration of function 'vmalloc' drivers/misc/vmw_vmci/vmci_queue_pair.c:302: warning: assignment makes pointer from integer without a cast drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: implicit declaration of function 'vmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: 'VM_MAP' undeclared (first use in this function) drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: (Each undeclared identifier is reported only once drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: for each function it appears in.) drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_host_map_queues': drivers/misc/vmw_vmci/vmci_queue_pair.c:843: error: 'VM_MAP' undeclared (first use in this function) Fix the build by directly including vmalloc.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: George Zhang <georgezhang@vmware.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We can't rely on vmalloc.h being included by other included files because
under some configs it is possible for the build to fail:

drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_free_queue':
drivers/misc/vmw_vmci/vmci_queue_pair.c:270: error: implicit declaration of function 'vunmap'
drivers/misc/vmw_vmci/vmci_queue_pair.c:277: error: implicit declaration of function 'vfree'
drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_alloc_queue':
drivers/misc/vmw_vmci/vmci_queue_pair.c:302: error: implicit declaration of function 'vmalloc'
drivers/misc/vmw_vmci/vmci_queue_pair.c:302: warning: assignment makes pointer from integer without a cast
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: implicit declaration of function 'vmap'
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: 'VM_MAP' undeclared (first use in this function)
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: (Each undeclared identifier is reported only once
drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: for each function it appears in.)
drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_host_map_queues':
drivers/misc/vmw_vmci/vmci_queue_pair.c:843: error: 'VM_MAP' undeclared (first use in this function)

Fix the build by directly including vmalloc.h.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: George Zhang <georgezhang@vmware.com>
Cc: Andy King <acking@vmware.com>
Cc: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>