linux-stable.git/drivers/misc/pti.c, branch linux-5.4.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman

drivers/misc/intel/pti: Rename the header file to free up the namespace

2017-12-17T11:52:34+00:00

We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the
namespace by renaming the  driver header to .

(Also standardize the header guard name while at it.)

Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: J Freyensee 
Cc: Greg Kroah-Hartman 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

misc: pti: remove unnecessary pci_set_drvdata()

2013-09-26T16:13:54+00:00

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2012-12-11T22:08:47+00:00

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman "

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...

misc: remove use of __devexit

2012-11-21T20:53:32+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: "Michał Mirosław" 
Cc: Wolfram Sang 
Cc: Eric Piel 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

misc: remove use of __devinitconst

2012-11-21T20:52:40+00:00

CONFIG_HOTPLUG is going away as an option so __devinitconst is no
longer needed.

Signed-off-by: Bill Pemberton 
Signed-off-by: Greg Kroah-Hartman

misc: remove use of __devinit

2012-11-21T20:51:53+00:00

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: "Michał Mirosław" 
Cc: Eric Piel 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

drivers/misc: remove use of __devexit_p

2012-11-21T20:49:50+00:00

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: "Michał Mirosław" 
Cc: Wolfram Sang 
Cc: Eric Piel 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

TTY: call tty_port_destroy in the rest of drivers

2012-11-16T01:20:58+00:00

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

To be sure, the TTY buffers (and later some stuff) are gone along with
the tty_port, we have to call tty_port_destroy at tear-down places.
This is mostly where the structure containing a tty_port is freed.
This patch does exactly that -- put tty_port_destroy at those places.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

misc: pti, use tty_port_register_device

2012-08-10T20:29:57+00:00

So now we have enough of tty_ports, so we can signal the TTY layer to
use them by tty_port_register_device.

The upside is that we look like we can introduce tty_port_easy_open
and put it directly as tty_operations->open to drivers doing nothing
in open and using tty_port_register_device. Because the easy open can
obtain a tty_port rather easily from a tty now. Heh, what a nice
by-product.

Signed-off-by: Jiri Slaby 
Cc: J Freyensee 
Signed-off-by: Greg Kroah-Hartman