Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
i2c-host updates for v6.15 Refactoring and cleanups - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general refactorings - octeon: remove 10-bit address support Improvements - amd-asf: improved error handling - designware: use guard(mutex) - amd-asf, designware: update naming to follow latest specs - cadence: fix cleanup path in probe - i801: use MMIO and I/O mapping helpers to access registers - pxa: handle error after clk_prepare_enable New features - added i2c_10bit_addr_*_from_msg() and updated multiple drivers - omap: added multiplexer state handling - qcom-geni: update frequency configuration - qup: introduce DMA usage policy New hardware support - exynos: add support for Samsung exynos7870 - k1: add support for spacemit k1 (new driver) - imx: add support for i.mx94 lpi2c - rk3x: add support for rk3562 Multiplexers - ltc4306, reg: fix assignment in platform_driver structure
We need the fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These result in a very small reduction in driver size, but at the cost of more complex build and slightly harder to read code. In the case of of_match_ptr() it also prevents use of PRP0001 ACPI based identification. In this particular case we have a valid ACPI/PNP ID that should be used in preference to PRP0001 but doesn't mean we should prevent that route. With this done, drop unneeded of*.h inclusions and __maybe_unused markers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Like other eeprom drivers, check if the device is really there and functional before probing. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-8-ba5e79fe8771@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-7-ba5e79fe8771@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ...
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...