We need the char-misc changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and creates proper alias for SPI driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240414154957.127113-3-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and creates proper alias for SPI driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240414154957.127113-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.
Move the failure point before registering the nvmem device.
Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240304180643.1201319-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel test robot reports following sparse warnings: >> drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] memaddr @@ got restricted __le16 [usertype] @@ drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: expected unsigned short [addressable] [assigned] [usertype] memaddr drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: restricted __le16 [usertype] ..... For data structures needs cpu_to_le* conversion, their prototype need to be declared with __le* explicitly. Declare data structures to __le* explicitly to address the issue: - struct idt_eeprom_seq::memaddr - struct idt_csr_seq::csraddr - struct idt_csr_seq::data Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401261250.b07Yt30Z-lkp@intel.com/ Signed-off-by: Dawei Li <dawei.li@shingroup.cn> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240131033028.3099156-1-dawei.li@shingroup.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...
This driver does not depend on CONFIG_OF so using of_match_ptr() makes sense to reduce the size a bit. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use helper pm_runtime_resume_and_get() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/c3045427-da42-4f7c-8a96-3c4756646cd0@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DDR3 SPD data structure advertises the presence of a thermal
sensor on a DDR3 module in byte 32, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.
The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.
Note: Thermal sensors on DDR4 DIMM's are instantiated from the
ee1004 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>