The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318085727.20748-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull i2c updates from Wolfram Sang:
 "i2c-core updates (collected by Wolfram):
   - remove last user and unexport i2c_of_match_device()
   - irq usage cleanup from Jiri

  i2c-host updates (collected by Andi):

  Refactoring and cleanups:
   - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
     refactorings
   - octeon: remove 10-bit address support

  Improvements:
   - amd-asf: improved error handling
   - designware: use guard(mutex)
   - amd-asf, designware: update naming to follow latest specs
   - cadence: fix cleanup path in probe
   - i801: use MMIO and I/O mapping helpers to access registers
   - pxa: handle error after clk_prepare_enable

  New features:
   - added i2c_10bit_addr_*_from_msg() and updated multiple drivers
   - omap: added multiplexer state handling
   - qcom-geni: update frequency configuration
   - qup: introduce DMA usage policy

  New hardware support:
   - exynos: add support for Samsung exynos7870
   - k1: add support for spacemit k1 (new driver)
   - imx: add support for i.mx94 lpi2c
   - rk3x: add support for rk3562
   - designware: add support for Renesas RZ/N1D

  Multiplexers:
   - ltc4306, reg: fix assignment in platform_driver structure

  at24 eeprom updates (collected by Bartosz):
   - add two new compatible entries to the DT binding document
   - drop of_match_ptr() and ACPI_PTR() macros"

* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
  irqdomain: i2c: Switch to irq_find_mapping()
  i2c: iproc: Refactor prototype and remove redundant error checks
  i2c: qcom-geni: Update i2c frequency table to match hardware guidance
  i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
  i2c: pasemi: Add registers bits and switch to BIT()
  i2c: k1: Initialize variable before use
  i2c: spacemit: add support for SpacemiT K1 SoC
  dt-bindings: i2c: spacemit: add support for K1 SoC
  i2c: omap: Add support for setting mux
  dt-bindings: i2c: omap: Add mux-states property
  i2c: octeon: remove 10-bit addressing support
  i2c: octeon: fix return commenting
  i2c: i801: Use MMIO if available
  i2c: i801: Switch to iomapped register access
  i2c: i801: Improve too small kill wait time in i801_check_post
  i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
  i2c: i801: Cosmetic improvements
  i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
  i2c: cadence: Simplify using devm_clk_get_enabled()
  ...

i2c-host updates for v6.15

Refactoring and cleanups
 - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
   refactorings
 - octeon: remove 10-bit address support

Improvements
 - amd-asf: improved error handling
 - designware: use guard(mutex)
 - amd-asf, designware: update naming to follow latest specs
 - cadence: fix cleanup path in probe
 - i801: use MMIO and I/O mapping helpers to access registers
 - pxa: handle error after clk_prepare_enable

New features
 - added i2c_10bit_addr_*_from_msg() and updated multiple drivers
 - omap: added multiplexer state handling
 - qcom-geni: update frequency configuration
 - qup: introduce DMA usage policy

New hardware support
 - exynos: add support for Samsung exynos7870
 - k1: add support for spacemit k1 (new driver)
 - imx: add support for i.mx94 lpi2c
 - rk3x: add support for rk3562

Multiplexers
 - ltc4306, reg: fix assignment in platform_driver structure

We need the fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These result in a very small reduction in driver size, but at the cost
of more complex build and slightly harder to read code. In the case of
of_match_ptr() it also prevents use of PRP0001 ACPI based identification.
In this particular case we have a valid ACPI/PNP ID that should be used
in preference to PRP0001 but doesn't mean we should prevent that route.

With this done, drop unneeded of*.h inclusions and __maybe_unused markers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Like other eeprom drivers, check if the device is really there and
functional before probing.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.

Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-8-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-7-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty / serial driver updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.13-rc1.
  Nothing major at all this time, only some small changes:

   - few device tree binding updates

   - 8250_exar serial driver updates

   - imx serial driver updates

   - sprd_serial driver updates

   - other tiny serial driver updates, full details in the shortlog

  All of these have been in linux-next for a while with one reported
  issue, but that commit has now been reverted"

* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
  Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
  serial: amba-pl011: fix build regression
  dt-bindings: serial: Add a new compatible string for ums9632
  serial: sprd: Add support for sc9632
  tty/serial/altera_uart: unwrap error log string
  tty/serial/altera_jtaguart: unwrap error log string
  serial: amba-pl011: Fix RX stall when DMA is used
  tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
  serial: 8250_fintek: Add support for F81216E
  serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  tty: atmel_serial: Fix typo retreives to retrieves
  tty: atmel_serial: Use devm_platform_ioremap_resource()
  serial: 8250: omap: Move pm_runtime_get_sync
  tty: serial: samsung: Add Exynos8895 compatible
  dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
  serial: 8250_dw: Add Sophgo SG2044 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
  altera_jtaguart: Use dev_err() to report error attaching IRQ
  altera_uart: Use dev_err() to report error attaching IRQ handler
  ...