linux-stable.git/drivers/misc/eeprom, branch linux-5.4.y Linux kernel stable tree eeprom: digsy_mtc: Make GPIO lookup table match the device 2025-03-13T11:43:33+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2025-02-06T22:03:11+00:00 7f24cff72a699d18077ebe8bbeb8329c3961dc4a commit 038ef0754aae76f79b147b8867f9250e6a976872 upstream. The dev_id value in the GPIO lookup table must match to the device instance name, which in this case is combined of name and platform device ID, i.e. "spi_gpio.1". But the table assumed that there was no platform device ID defined, which is wrong. Fix the dev_id value accordingly. Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 038ef0754aae76f79b147b8867f9250e6a976872 upstream.

The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.

Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle 2024-12-14T18:44:55+00:00 Parker Newman pnewman@connecttech.com 2024-10-02T15:12:33+00:00 9ab3a1aaa545aa11a6e4e79d39869d44660b7c45 [ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ]

Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.

The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.

More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.

In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM:	110[A5-A0]	(9 bits)
Read from EEPROM:	0[D15-D0]	(17 bits)

Where:
	110 is the start bit and READ OpCode
	[A5-A0] is the address to read from
	0 is a "dummy bit" preceding the actual data
	[D15-D0] is the actual data.

Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.

However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.

Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
eeprom: at24: also select REGMAP 2023-06-14T08:59:58+00:00 Randy Dunlap rdunlap@infradead.org 2023-06-08T02:54:24+00:00 7d0a29c74a312366c013161787a1a59691e6aa39 [ Upstream commit 7f3c782b3914e510b646a77aedc3adeac2e4a63b ] Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors, so also select REGMAP to prevent the build errors. ../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration 540 | struct regmap_config *regmap_config) ../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client': ../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c: In function 'at24_probe': ../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable] Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7f3c782b3914e510b646a77aedc3adeac2e4a63b ]

Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.

../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration
  540 |                                   struct regmap_config *regmap_config)
../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client':
../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
  552 |         regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  552 |         regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c: In function 'at24_probe':
../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type
  586 |         struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known
  586 |         struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]

Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX 2022-02-16T11:52:52+00:00 Jonas Malaco jonas@protocubo.io 2022-02-03T16:49:52+00:00 3937c35493ee2847aaefcfa5460e94b7443eef49 commit c0689e46be23160d925dca95dfc411f1a0462708 upstream. Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c0689e46be23160d925dca95dfc411f1a0462708 upstream.

Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.

In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8.  If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows.  And this is common
when user space tries to read the entire EEPROM at once.

To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eeprom: idt_89hpesx: Restore printing the unsupported fwnode name 2021-07-14T14:53:43+00:00 Andy Shevchenko andy.shevchenko@gmail.com 2021-06-07T22:17:56+00:00 ac7943a7f4adf43507589d0cc1f06aa9095db025 [ Upstream commit e0db3deea73ba418bf5dc21f5a4e32ca87d16dde ] When iterating over child firmware nodes restore printing the name of ones that are not supported. While at it, refactor loop body to clearly show that we stop at the first match. Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing") Cc: Huy Duong <qhuyduong@hotmail.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210607221757.81465-2-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e0db3deea73ba418bf5dc21f5a4e32ca87d16dde ]

When iterating over child firmware nodes restore printing the name of ones
that are not supported.

While at it, refactor loop body to clearly show that we stop at the first match.

Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
eeprom: idt_89hpesx: Put fwnode in matching case during ->probe() 2021-07-14T14:53:43+00:00 Andy Shevchenko andy.shevchenko@gmail.com 2021-06-07T22:17:55+00:00 9fc3fbc3af67bcd5eaf1b6cba0e008b04100fdac [ Upstream commit 3f6ee1c095156a74ab2df605af13020f1ce3e600 ] device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing") Cc: Huy Duong <qhuyduong@hotmail.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210607221757.81465-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f6ee1c095156a74ab2df605af13020f1ce3e600 ]

device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: eeprom_93xx46: Add quirk to support Microchip 93LC46B eeprom 2021-03-11T13:06:50+00:00 Aswath Govindraju a-govindraju@ti.com 2021-01-05T10:58:12+00:00 1d113893ff9d1215b88e6ad4be43c5a4c428afa7 [ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ] A dummy zero bit is sent preceding the data during a read transfer by the Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift of data during a read. In order to ignore this bit a quirk can be added to send an extra zero bit after the read address. Add a quirk to ignore the zero bit sent before data by adding a zero bit after the read address. [1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]

A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.

Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.

[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: eeprom_93xx46: Add module alias to avoid breaking support for non device tree users 2021-03-04T09:26:36+00:00 Aswath Govindraju a-govindraju@ti.com 2021-01-13T05:12:52+00:00 fcfec32c9a01b29e8febb053b3796617479d2000 [ Upstream commit 4540b9fbd8ebb21bb3735796d300a1589ee5fbf2 ] Module alias "spi:93xx46" is used by non device tree users like drivers/misc/eeprom/digsy_mtc_eeprom.c and removing it will break support for them. Fix this by adding back the module alias "spi:93xx46". Fixes: 13613a2246bf ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4540b9fbd8ebb21bb3735796d300a1589ee5fbf2 ]

Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c  and removing it will
break support for them.

Fix this by adding back the module alias "spi:93xx46".

Fixes: 13613a2246bf ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: eeprom_93xx46: Fix module alias to enable module autoprobe 2021-03-04T09:26:35+00:00 Aswath Govindraju a-govindraju@ti.com 2021-01-07T16:39:53+00:00 047e029392a5d4d2e096bbf4da45e983ab517107 [ Upstream commit 13613a2246bf531f5fc04e8e62e8f21a3d39bf1c ] Fix module autoprobe by correcting module alias to match the string from /sys/class/.../spi1.0/modalias content. Fixes: 06b4501e88ad ("misc/eeprom: add driver for microwire 93xx46 EEPROMs") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 13613a2246bf531f5fc04e8e62e8f21a3d39bf1c ]

Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.

Fixes: 06b4501e88ad ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
eeprom: at25: set minimum read/write access stride to 1 2020-10-29T08:58:10+00:00 Christian Eggers ceggers@arri.de 2020-07-28T09:29:59+00:00 efb893a56cea0b489a8802ddc4c4f61a2063ee5b commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream. SPI eeproms are addressed by byte. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728092959.24600-1-ceggers@arri.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream.

SPI eeproms are addressed by byte.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728092959.24600-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>