linux-stable.git/drivers/misc/Kconfig, branch v6.15

cxl: Remove driver

2025-03-16T11:04:27+00:00

Remove the cxl driver that provides support for the IBM Coherent
Accelerator Processor Interface. Revert or clean up associated code in
arch/powerpc that is no longer necessary.

cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.

Thanks to Mikey Neuling, Ian Munsie, Daniel Axtens, Frederic Barrat,
Christophe Lombard, Philippe Bergheaud, Vaibhav Jain and Alastair
D'Silva for their work on this driver over the years.

Signed-off-by: Andrew Donnellan 
Acked-by: Frederic Barrat 
Acked-by: Madhavan Srinivasan 
Signed-off-by: Michael Ellerman 
Link: https://patch.msgid.link/20250219070007.177725-2-ajd@linux.ibm.com

misc: Kconfig: Make MCHP_LAN966X_PCI depend on OF_OVERLAY

2025-01-10T09:16:31+00:00

Drivers should depend on configurations that can be user-configurable
instead of selecting them.

Without this patch, OF cannot be disabled this way:
make allyesconfig
scripts/config -d OF
make olddefconfig

Which is a typical test in CI systems like media-ci.

Now that we are at it, remove the dependency on OF, it will come
automatically from OF_OVERLAY.

Signed-off-by: Ricardo Ribalda 
Link: https://lore.kernel.org/r/20241129-lan966x-depend-v2-1-72bb9397f421@chromium.org
Signed-off-by: Greg Kroah-Hartman

ntsync: No longer depend on BROKEN.

2025-01-08T12:18:12+00:00

f5b335dc025cfee90957efa90dc72fada0d5abb4 ("misc: ntsync: mark driver as "broken"
to prevent from building") was committed to avoid the driver being used while
only part of its functionality was released. Since the rest of the functionality
has now been committed, revert this.

Signed-off-by: Elizabeth Figura 
Acked-by: Peter Zijlstra (Intel) 
Acked-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20241213193511.457338-31-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-11-29T19:58:27+00:00

Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
 "Here is the 'big and hairy' char/misc/iio and other small driver
  subsystem updates for 6.13-rc1.

  Loads of things in here, and even a fun merge conflict!

   - rust misc driver bindings and other rust changes to make misc
     drivers actually possible.

     I think this is the tipping point, expect to see way more rust
     drivers going forward now that these bindings are present. Next
     merge window hopefully we will have pci and platform drivers
     working, which will fully enable almost all driver subsystems to
     start accepting (or at least getting) rust drivers.

     This is the end result of a lot of work from a lot of people,
     congrats to all of them for getting this far, you've proved many of
     us wrong in the best way possible, working code :)

   - IIO driver updates, too many to list individually, that subsystem
     keeps growing and growing...

   - Interconnect driver updates

   - nvmem driver updates

   - pwm driver updates

   - platform_driver::remove() fixups, loads of them

   - counter driver updates

   - misc driver updates (keba?)

   - binder driver updates and fixes

   - loads of other small char/misc/etc driver updates and additions,
     full details in the shortlog.

  All of these have been in linux-next for a while, with no other
  reported issues other than that merge conflict"

* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
  mei: vsc: Fix typo "maintstepping" -> "mainstepping"
  firmware: Switch back to struct platform_driver::remove()
  misc: isl29020: Fix the wrong format specifier
  scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
  fpga: Switch back to struct platform_driver::remove()
  mei: vsc: Improve error logging in vsc_identify_silicon()
  mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
  dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
  dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
  spmi: pmic-arb: fix return path in for_each_available_child_of_node()
  iio: Move __private marking before struct element priv in struct iio_dev
  docs: iio: ad7380: add adaq4370-4 and adaq4380-4
  iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  iio: adc: ad7380: use local dev variable to shorten long lines
  iio: adc: ad7380: fix oversampling formula
  dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
  bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
  misc: atmel-ssc: Use of_property_present() for non-boolean properties
  misc: keba: Add hardware dependency
  ...

misc: Add support for LAN966x PCI device

2024-10-24T10:09:33+00:00

Add a PCI driver that handles the LAN966x PCI device using a device-tree
overlay. This overlay is applied to the PCI device DT node and allows to
describe components that are present in the device.

The memory from the device-tree is remapped to the BAR memory thanks to
"ranges" properties computed at runtime by the PCI core during the PCI
enumeration.

The PCI device itself acts as an interrupt controller and is used as the
parent of the internal LAN966x interrupt controller to route the
interrupts to the assigned PCI INTx interrupt.

Signed-off-by: Herve Codina 
Acked-by: Greg Kroah-Hartman 
Acked-by: Bjorn Helgaas 	# quirks.c
Link: https://lore.kernel.org/r/20241014124636.24221-2-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel

misc: ti-st: st_kim: remove the driver

2024-10-18T11:42:21+00:00

This driver has only ever been used by the omap4-panda board file. This
file has been gone for over 10 years. Let it go.

Signed-off-by: Bartosz Golaszewski 
Link: https://lore.kernel.org/r/20241016094117.16654-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman

rpmb: add Replay Protected Memory Block (RPMB) subsystem

2024-08-26T11:16:20+00:00

A number of storage technologies support a specialised hardware
partition designed to be resistant to replay attacks. The underlying
HW protocols differ but the operations are common. The RPMB partition
cannot be accessed via standard block layer, but by a set of specific
RPMB commands. Such a partition provides authenticated and replay
protected access, hence suitable as a secure storage.

The initial aim of this patch is to provide a simple RPMB driver
interface which can be accessed by the optee driver to facilitate early
RPMB access to OP-TEE OS (secure OS) during the boot time.

A TEE device driver can claim the RPMB interface, for example, via
rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver
provides a callback to route RPMB frames to the RPMB device accessible
via rpmb_route_frames().

The detailed operation of implementing the access is left to the TEE
device driver itself.

Signed-off-by: Tomas Winkler 
Signed-off-by: Alex Bennée 
Signed-off-by: Shyam Saini 
Signed-off-by: Jens Wiklander 
Reviewed-by: Linus Walleij 
Tested-by: Manuel Traut 
Reviewed-by: Ulf Hansson 
Reviewed-by: Greg Kroah-Hartman 
Link: https://lore.kernel.org/r/20240814153558.708365-2-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson

misc: mrvl-cn10k-dpi: add PCI_IOV dependency

2024-07-31T11:47:27+00:00

I found one more missing dependency in the new driver: when building
without CONFIG_PCI_IOV, pci_sriov_configure_simple() cannot be
called directly:

drivers/misc/mrvl_cn10k_dpi.c: In function 'dpi_remove':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
    9 | #define NULL ((void *)0)
      |              ^
include/linux/pci.h:2416:41: note: in expansion of macro 'NULL'
 2416 | #define pci_sriov_configure_simple      NULL
      |                                         ^~~~
drivers/misc/mrvl_cn10k_dpi.c:652:9: note: in expansion of macro 'pci_sriov_configure_simple'
  652 |         pci_sriov_configure_simple(pdev, 0);

Add this to the Kconfig file as well.

Fixes: 5f67eef6dff3 ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Arnd Bergmann 
Tested-by: Vamsi Attunuru 
Link: https://lore.kernel.org/r/20240719103858.1292094-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman

misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems

2024-07-18T07:02:37+00:00

Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency,
compilation errors arise on 32-bit ARM with writeq() & readq() calls
which are used for accessing 64-bit values.

Since DPI hardware only works with 64-bit register accesses, using
CONFIG_64BIT dependency to skip compilation on 32-bit systems.

Fixes: a5e43e2d202d ("misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI")
Signed-off-by: Vamsi Attunuru 
Tested-by: Nathan Chancellor 
Tested-by: Jeff Johnson 
Acked-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20240717163739.181236-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman

misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI

2024-07-12T08:45:30+00:00

DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC
platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER
lineage.

Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER.

Signed-off-by: Vamsi Attunuru 
Link: https://lore.kernel.org/r/20240711120115.4069401-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman