linux-stable.git/drivers/mfd, branch v6.18.4 Linux kernel stable tree mfd: max77620: Fix potential IRQ chip conflict when probing two devices 2026-01-08T09:16:59+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-10-23T10:19:40+00:00 10eecb592afc854683366a8936accf43a197052c commit 2bac49bad1f3553cc3b3bfb22cc194e9bd9e8427 upstream. MAX77620 is most likely always a single device on the board, however nothing stops board designers to have two of them, thus same device driver could probe twice. Or user could manually try to probing second time. Device driver is not ready for that case, because it allocates statically 'struct regmap_irq_chip' as non-const and stores during probe in 'irq_drv_data' member a pointer to per-probe state container ('struct max77620_chip'). devm_regmap_add_irq_chip() does not make a copy of 'struct regmap_irq_chip' but store the pointer. Second probe - either successful or failure - would overwrite the 'irq_drv_data' from previous device probe, so interrupts would be executed in a wrong context. Cc: stable@vger.kernel.org Fixes: 3df140d11c6d ("mfd: max77620: Mask/unmask interrupt before/after servicing it") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20251023101939.67991-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2bac49bad1f3553cc3b3bfb22cc194e9bd9e8427 upstream.

MAX77620 is most likely always a single device on the board, however
nothing stops board designers to have two of them, thus same device
driver could probe twice. Or user could manually try to probing second
time.

Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77620_chip').  devm_regmap_add_irq_chip() does not
make a copy of 'struct regmap_irq_chip' but store the pointer.

Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.

Cc: stable@vger.kernel.org
Fixes: 3df140d11c6d ("mfd: max77620: Mask/unmask interrupt before/after servicing it")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023101939.67991-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mfd: altera-sysmgr: Fix device leak on sysmgr regmap lookup 2026-01-08T09:16:59+00:00 Johan Hovold johan@kernel.org 2025-09-25T15:02:19+00:00 e4077fcb1479405bbe902eac600092583e066359 commit ccb7cd3218e48665f3c7e19eede0da5f069c323d upstream. Make sure to drop the reference taken to the sysmgr platform device when retrieving its driver data. Note that holding a reference to a device does not prevent its driver data from going away. Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager") Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ccb7cd3218e48665f3c7e19eede0da5f069c323d upstream.

Make sure to drop the reference taken to the sysmgr platform device when
retrieving its driver data.

Note that holding a reference to a device does not prevent its driver
data from going away.

Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Cc: stable@vger.kernel.org	# 5.2
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path 2025-12-18T13:03:07+00:00 Haotian Zhang vulab@iscas.ac.cn 2025-11-18T12:14:27+00:00 d0482ca91d76b337fd485a2437edabc530b3630f [ Upstream commit 384bd58bf7095e4c4c8fcdbcede316ef342c630c ] If devm_request_threaded_irq() fails after irq_domain_add_linear() succeeds in mt6358_irq_init(), the function returns without removing the created IRQ domain, leading to a resource leak. Call irq_domain_remove() in the error path after a successful irq_domain_add_linear() to properly release the IRQ domain. Fixes: 2b91c28f2abd ("mfd: Add support for the MediaTek MT6358 PMIC") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251118121427.583-1-vulab@iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 384bd58bf7095e4c4c8fcdbcede316ef342c630c ]

If devm_request_threaded_irq() fails after irq_domain_add_linear()
succeeds in mt6358_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.

Call irq_domain_remove() in the error path after a successful
irq_domain_add_linear() to properly release the IRQ domain.

Fixes: 2b91c28f2abd ("mfd: Add support for the MediaTek MT6358 PMIC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121427.583-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path 2025-12-18T13:03:07+00:00 Haotian Zhang vulab@iscas.ac.cn 2025-11-18T12:15:00+00:00 f620f2a12012a5bc9fa8c2688fdfd98fdae751ff [ Upstream commit b4b1bd1f330fdd13706382be6c90ce9f58cee3f5 ] If devm_request_threaded_irq() fails after irq_domain_create_linear() succeeds in mt6397_irq_init(), the function returns without removing the created IRQ domain, leading to a resource leak. Call irq_domain_remove() in the error path after a successful irq_domain_create_linear() to properly release the IRQ domain. Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251118121500.605-1-vulab@iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b4b1bd1f330fdd13706382be6c90ce9f58cee3f5 ]

If devm_request_threaded_irq() fails after irq_domain_create_linear()
succeeds in mt6397_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.

Call irq_domain_remove() in the error path after a successful
irq_domain_create_linear() to properly release the IRQ domain.

Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121500.605-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mfd: da9055: Fix missing regmap_del_irq_chip() in error path 2025-12-18T13:02:51+00:00 Haotian Zhang vulab@iscas.ac.cn 2025-10-10T01:17:36+00:00 9922a95abfc1b13d49cd07343fa5268cabee3bf1 [ Upstream commit 1b58acfd067ca16116b9234cd6b2d30cc8ab7502 ] When da9055_device_init() fails after regmap_add_irq_chip() succeeds but mfd_add_devices() fails, the error handling path only calls mfd_remove_devices() but forgets to call regmap_del_irq_chip(). This results in a resource leak. Fix this by adding regmap_del_irq_chip() to the error path so that resources are released properly. Fixes: 2896434cf272 ("mfd: DA9055 core driver") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251010011737.1078-1-vulab@iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1b58acfd067ca16116b9234cd6b2d30cc8ab7502 ]

When da9055_device_init() fails after regmap_add_irq_chip()
succeeds but mfd_add_devices() fails, the error handling path
only calls mfd_remove_devices() but forgets to call
regmap_del_irq_chip(). This results in a resource leak.

Fix this by adding regmap_del_irq_chip() to the error path so
that resources are released properly.

Fixes: 2896434cf272 ("mfd: DA9055 core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251010011737.1078-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mfd: ls2kbmc: check for devm_mfd_add_devices() failure 2025-10-03T15:38:23+00:00 Dan Carpenter dan.carpenter@linaro.org 2025-10-03T09:29:18+00:00 4af66c2bcab06e6e515b23139122e745d7619680 Call pci_disable_device() if devm_mfd_add_devices() fails. Fixes: 0d64f6d1ffe9 ("mfd: ls2kbmc: Introduce Loongson-2K BMC core driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Message-ID: <e3e7cf2cfded48c9fca8bc981c54bbcb7edb9580.1759478975.git.dan.carpenter@linaro.org> Signed-off-by: Corey Minyard <corey@minyard.net> 
Call pci_disable_device() if devm_mfd_add_devices() fails.

Fixes: 0d64f6d1ffe9 ("mfd: ls2kbmc: Introduce Loongson-2K BMC core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <e3e7cf2cfded48c9fca8bc981c54bbcb7edb9580.1759478975.git.dan.carpenter@linaro.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
mfd: ls2kbmc: Fix an IS_ERR() vs NULL check in probe() 2025-10-03T15:38:17+00:00 Dan Carpenter dan.carpenter@linaro.org 2025-10-03T09:29:09+00:00 0892507f4a0b76eb897afc2bacca85e172512379 The devm_kzalloc() function returns NULL on error so check for that instead of error pointers. Fixes: d952bba3fbb5 ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Message-ID: <df80c6d61229eb8f877c3694525c0f97e64a43e8.1759478975.git.dan.carpenter@linaro.org> Signed-off-by: Corey Minyard <corey@minyard.net> 
The devm_kzalloc() function returns NULL on error so check for that
instead of error pointers.

Fixes: d952bba3fbb5 ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <df80c6d61229eb8f877c3694525c0f97e64a43e8.1759478975.git.dan.carpenter@linaro.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2025-10-02T00:32:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T00:32:51+00:00 38057e323657695ec8f814aff0cdd1c7e00d3e9b Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... 
Pull SoC driver updates from Arnd Bergmann:
 "Lots of platform specific updates for Qualcomm SoCs, including a new
  TEE subsystem driver for the Qualcomm QTEE firmware interface.

  Added support for the Apple A11 SoC in drivers that are shared with
  the M1/M2 series, among more updates for those.

  Smaller platform specific driver updates for Renesas, ASpeed,
  Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
  SoCs.

  Driver updates in the cache controller, memory controller and reset
  controller subsystems.

  SCMI firmware updates to add more features and improve robustness.
  This includes support for having multiple SCMI providers in a single
  system.

  TEE subsystem support for protected DMA-bufs, allowing hardware to
  access memory areas that managed by the kernel but remain inaccessible
  from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
  soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
  soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
  soc: fsl: qe: Change GPIO driver to a proper platform driver
  tee: fix register_shm_helper()
  pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
  dt-bindings: spmi: Add Apple A11 and T2 compatible
  serial: qcom-geni: Load UART qup Firmware from linux side
  spi: geni-qcom: Load spi qup Firmware from linux side
  i2c: qcom-geni: Load i2c qup Firmware from linux side
  soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  soc: qcom: geni-se: Cleanup register defines and update copyright
  dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
  Documentation: tee: Add Qualcomm TEE driver
  tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
  tee: qcom: add primordial object
  tee: add Qualcomm TEE driver
  tee: increase TEE_MAX_ARG_SIZE to 4096
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
  tee: add close_context to TEE driver operation
  ...
Merge tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 2025-10-01T20:02:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-01T20:02:59+00:00 3ee22ad492a49303f54d4e1c5168327742ac7aaf Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - introduce adc-battery-helper for capacity estimation based on simple ADC readings of battery voltage and current - add new properties for battery internal resistance and state of health Power-supply drivers: - ug3105_battery: convert to adc-battery-helper - intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries - rt9467-charger: add voltage and current ADC support - sbs-charger: support multiple instances - qcom_battmgr: - add charge control support - add support for state of health and internal resistance - max77705_charger: - big driver cleanup - add support for setting charge current - misc minor fixes and cleanups" * tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits) power: supply: qcom_battmgr: handle charging state change notifications power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro power: supply: max77705_charger: rework interrupts power: supply: max77705_charger: add writable properties power: supply: max77705_charger: return error when config fails power: supply: max77705_charger: use regfields for config registers power: supply: max77705_charger: refactoring: rename charger to chg mfd: max77705: max77705_charger: move active discharge setting to mfd parent power: supply: max77976_charger: fix constant current reporting power: supply: qcom_battmgr: Add charge control support dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties power: supply: qcom_battmgr: update compats for SM8550 and X1E80100 power: supply: qcom_battmgr: Add state_of_health property power: supply: qcom_battmgr: Add resistance power supply property power: supply: core: Add state_of_health power supply property power: supply: core: Add resistance power supply property power: supply: rx51: remove redundant condition checks dt-bindings: power: supply: bq24190: document charge enable pin dt-bindings: power: supply: bq27xxx: document optional interrupt power: supply: intel_dc_ti_battery: Drop no longer relevant comment ... 
Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - introduce adc-battery-helper for capacity estimation based on
     simple ADC readings of battery voltage and current
   - add new properties for battery internal resistance and state of
     health

  Power-supply drivers:
   - ug3105_battery: convert to adc-battery-helper
   - intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
   - rt9467-charger: add voltage and current ADC support
   - sbs-charger: support multiple instances
   - qcom_battmgr:
       - add charge control support
       - add support for state of health and internal resistance
   - max77705_charger:
       - big driver cleanup
       - add support for setting charge current
   - misc minor fixes and cleanups"

* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
  power: supply: qcom_battmgr: handle charging state change notifications
  power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
  power: supply: max77705_charger: rework interrupts
  power: supply: max77705_charger: add writable properties
  power: supply: max77705_charger: return error when config fails
  power: supply: max77705_charger: use regfields for config registers
  power: supply: max77705_charger: refactoring: rename charger to chg
  mfd: max77705: max77705_charger: move active discharge setting to mfd parent
  power: supply: max77976_charger: fix constant current reporting
  power: supply: qcom_battmgr: Add charge control support
  dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
  power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
  power: supply: qcom_battmgr: Add state_of_health property
  power: supply: qcom_battmgr: Add resistance power supply property
  power: supply: core: Add state_of_health power supply property
  power: supply: core: Add resistance power supply property
  power: supply: rx51: remove redundant condition checks
  dt-bindings: power: supply: bq24190: document charge enable pin
  dt-bindings: power: supply: bq27xxx: document optional interrupt
  power: supply: intel_dc_ti_battery: Drop no longer relevant comment
  ...
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2025-10-01T19:04:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-01T19:04:12+00:00 b4918003cf54f99004c136c26f96b6df7ab49fac Pull MFD updates from Lee Jones: "This round of updates contains a fair amount of new device support, a couple of fixes and some refactoring. The most notable additions include new drivers for Loongson's Security Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs. The rest of the set provides a return value check fix and a refactoring to use a more modern GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger. New Support & Features: - Add a suite of drivers for the Loongson Security Engine, including the core controller, a Random Number Generator (RNG) and Trusted Platform Module (TPM) support. - Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD cell registration, and a system power-off handler. - Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD driver and a power supply driver for the charger functionality. Improvements & Fixes: - Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent potential silent failures. Cleanups & Refactoring: - Add a MAINTAINERS entry for the new Loongson Security Engine drivers. - Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API. Removals: - Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and touchscreen drivers. Device Tree Bindings Updates: - Add device tree bindings for the TI BQ25703A charger" * tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x dt-bindings: watchdog: Add SMARC-sAM67 support dt-bindings: mfd: tps6594: Allow gpio-line-names mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs mfd: 88pm886: Add GPADC cell mfd: vexpress-sysreg: Use more common syntax for compound literals mfd: rz-mtu3: Fix MTU5 NFCR register offset mfd: max77705: Setup the core driver as an interrupt controller mfd: cs42l43: Remove IRQ masking in suspend mfd: cs42l43: Move IRQ enable/disable to encompass force suspend mfd: ls2kbmc: Add Loongson-2K BMC reset function support mfd: ls2kbmc: Introduce Loongson-2K BMC core driver mfd: bd71828, bd71815: Prepare for power-supply support dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema dt-bindings: mfd: fsl,mc13xxx: Add buttons node dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema mfd: macsmc: Add "apple,t8103-smc" compatible ... 
Pull MFD updates from Lee Jones:
 "This round of updates contains a fair amount of new device support, a
  couple of fixes and some refactoring. The most notable additions
  include new drivers for Loongson's Security Engine, RNG and TPM, new
  drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.

  The rest of the set provides a return value check fix and a
  refactoring to use a more modern GPIO API for the VEXPRESS sysreg
  driver, the removal of a deprecated IRQ ACK function from the MC13xxx
  RTC driver and a new DT binding for the aforementioned TI BQ257xx
  charger.

  New Support & Features:
   - Add a suite of drivers for the Loongson Security Engine, including
     the core controller, a Random Number Generator (RNG) and Trusted
     Platform Module (TPM) support.
   - Introduce support for the TI TPS6594 PMIC's power button, including
     the input driver, MFD cell registration, and a system power-off
     handler.
   - Add comprehensive support for the TI BQ257xx series of charger ICs,
     including the core MFD driver and a power supply driver for the
     charger functionality.

  Improvements & Fixes:
   - Check the return value of devm_gpiochip_add_data() in the VEXPRESS
     sysreg driver to prevent potential silent failures.

  Cleanups & Refactoring:
   - Add a MAINTAINERS entry for the new Loongson Security Engine
     drivers.
   - Convert the VEXPRESS sysreg driver to use the modern generic GPIO
     chip API.

  Removals:
   - Remove the deprecated and unused mc13xxx_irq_ack() function from
     the MC13xxx RTC, input and touchscreen drivers.

  Device Tree Bindings Updates:
   - Add device tree bindings for the TI BQ25703A charger"

* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
  mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
  dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
  dt-bindings: watchdog: Add SMARC-sAM67 support
  dt-bindings: mfd: tps6594: Allow gpio-line-names
  mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
  mfd: 88pm886: Add GPADC cell
  mfd: vexpress-sysreg: Use more common syntax for compound literals
  mfd: rz-mtu3: Fix MTU5 NFCR register offset
  mfd: max77705: Setup the core driver as an interrupt controller
  mfd: cs42l43: Remove IRQ masking in suspend
  mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
  mfd: ls2kbmc: Add Loongson-2K BMC reset function support
  mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
  mfd: bd71828, bd71815: Prepare for power-supply support
  dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
  dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
  dt-bindings: mfd: fsl,mc13xxx: Add buttons node
  dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
  mfd: macsmc: Add "apple,t8103-smc" compatible
  ...