linux-stable.git/drivers/mfd, branch v4.4.227

mfd: lp8788-irq: Uninitialized variable in irq handler

2020-05-10T08:26:13+00:00

commit 22aab38e7b59fd79ce1045006be69a9abab58e5a upstream.

Instead to being true/false, the "handled" is true/uninitialized.
Presumably this doesn't cause that many problems in real life because
normally we handle the IRQ.

Fixes: eea6b7cc53aa ('mfd: Add lp8788 mfd driver')
Signed-off-by: Dan Carpenter 
Acked-by: Milo Kim 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: dln2: Fix sanity checking for endpoints

2020-04-24T05:57:18+00:00

[ Upstream commit fb945c95a482200876993977008b67ea658bd938 ]

While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
tries to harden the sanity checks it made at the same time a regression,
i.e.  mixed in and out endpoints. Obviously it should have been not tested on
real hardware at that time, but unluckily it didn't happen.

So, fix above mentioned typo and make device being enumerated again.

While here, introduce an enumerator for magic values to prevent similar issue
to happen in the future.

Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
Cc: Oliver Neukum 
Cc: Greg Kroah-Hartman 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

misc: rtsx: set correct pcr_ops for rts522A

2020-04-24T05:57:08+00:00

[ Upstream commit 10cea23b6aae15e8324f4101d785687f2c514fe5 ]

rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.

Fixes: ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing 
Cc: stable 
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

mfd: rn5t618: Mark ADC control register volatile

2020-02-14T21:29:59+00:00

commit 2f3dc25c0118de03a00ddc88b61f7216854f534d upstream.

There is a bit which gets cleared after conversion.

Fixes: 9bb9e29c78f8 ("mfd: Add Ricoh RN5T618 PMIC core driver")
Signed-off-by: Andreas Kemnade 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: da9062: Fix watchdog compatible string

2020-02-14T21:29:59+00:00

commit 1112ba02ff1190ca9c15a912f9269e54b46d2d82 upstream.

The watchdog driver compatible is "dlg,da9062-watchdog" and not
"dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and
fwnode. As result the watchdog driver can't parse the devicetree.

Fixes: 9b40b030c4ad ("mfd: da9062: Supply core driver")
Signed-off-by: Marco Felsch 
Acked-by: Guenter Roeck 
Reviewed-by: Adam Thomson 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: dln2: More sanity checking for endpoints

2020-02-14T21:29:54+00:00

commit 2b8bd606b1e60ca28c765f69c1eedd7d2a2e9dca upstream.

It is not enough to check for the number of endpoints.
The types must also be correct.

Reported-and-tested-by: syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: intel-lpss: Release IDA resources

2020-01-29T09:21:45+00:00

[ Upstream commit 02f36911c1b41fcd8779fa0c135aab0554333fa5 ]

ida instances allocate some internal memory for ->free_bitmap
in addition to the base 'struct ida'. Use ida_destroy() to release
that memory at module_exit().

Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

mfd: max8997: Enale irq-wakeup unconditionally

2019-11-28T17:25:51+00:00

[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ]

IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.

Signed-off-by: Marek Szyprowski 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values

2019-11-28T17:25:50+00:00

[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ]

When trying to read any MC13892 ADC channel on a imx51-babbage board:

The MC13892 PMIC shutdowns completely.

After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.

This bit is set by default after power on, but the driver was
clearing it.

After setting this bit it is possible to read the ADC values correctly.

Signed-off-by: Fabio Estevam 
Tested-by: Chris Healy 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin

mfd: intel-lpss: Remove D3cold delay

2019-10-07T19:01:01+00:00

[ Upstream commit 76380a607ba0b28627c9b4b55cd47a079a59624b ]

Goodix touchpad may drop its first couple input events when
i2c-designware-platdrv and intel-lpss it connects to took too long to
runtime resume from runtime suspended state.

This issue happens becuase the touchpad has a rather small buffer to
store up to 13 input events, so if the host doesn't read those events in
time (i.e. runtime resume takes too long), events are dropped from the
touchpad's buffer.

The bottleneck is D3cold delay it waits when transitioning from D3cold
to D0, hence remove the delay to make the resume faster. I've tested
some systems with intel-lpss and haven't seen any regression.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202683
Signed-off-by: Kai-Heng Feng 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin