linux-stable.git/drivers/mfd, branch linux-5.0.y Linux kernel stable tree mfd: twl-core: Disable IRQ while suspended 2019-05-08T05:22:52+00:00 Andreas Kemnade andreas@kemnade.info 2019-02-23T11:47:54+00:00 93a122ae03805e3884fa563cf621a779d342e199 [ Upstream commit 20bb907f7dc82ecc9e135ad7067ac7eb69c81222 ] Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get() in i2c-omap.c returns -EACCES. [ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug) [ 86.555572] Disabling non-boot CPUs ... [ 86.555664] Successfully put all powerdomains to target state [ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563751] twl4030: I2C error -13 reading PIH ISR [ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563812] twl4030: I2C error -13 reading PIH ISR [ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563903] twl4030: I2C error -13 reading PIH ISR This happens when we wakeup via something behing twl4030 (powerbutton or rtc alarm). This goes on for minutes until the system is finally resumed. Disable the irq on suspend and enable it on resume to avoid having i2c access problems when the irq registers are checked. Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org> 
[ Upstream commit 20bb907f7dc82ecc9e135ad7067ac7eb69c81222 ]

Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.

[   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[   86.555572] Disabling non-boot CPUs ...
[   86.555664] Successfully put all powerdomains to target state
[   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563751] twl4030: I2C error -13 reading PIH ISR
[   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563812] twl4030: I2C error -13 reading PIH ISR
[   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563903] twl4030: I2C error -13 reading PIH ISR

This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.

Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
mfd: sm501: Fix potential NULL pointer dereference 2019-03-23T19:11:35+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2019-01-22T16:56:36+00:00 9cc42d068f57ed5bf15ec626f20d256cfffc5d1c commit ae7b8eda27b33b1f688dfdebe4d46f690a8f9162 upstream. There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on *lookup* This bug was detected with the help of Coccinelle. Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ae7b8eda27b33b1f688dfdebe4d46f690a8f9162 upstream.

There is a potential NULL pointer dereference in case devm_kzalloc()
fails and returns NULL.

Fix this by adding a NULL check on *lookup*

This bug was detected with the help of Coccinelle.

Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mfd: Fix unmet dependency warning for MFD_TPS68470 2019-01-29T09:55:34+00:00 Sinan Kaya okaya@kernel.org 2019-01-21T23:19:57+00:00 9baddb61dfec0215da5d10a1d173790443e276c2 After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y]) Selected by [y]: - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM. I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI support without CONFIG_PCI set. For sake of a quick fix this introduces a new mandatory dependency to the driver which may survive without it. Otherwise we need to revisit the driver architecture to address this properly. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set") dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.

WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM
  Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y])
  Selected by [y]:
  - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y

MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM.

I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI
support without CONFIG_PCI set.

For sake of a quick fix this introduces a new mandatory dependency to
the driver which may survive without it. Otherwise we need to revisit
the driver architecture to address this properly.

Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2019-01-14T18:24:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-14T18:24:36+00:00 9deb9e1637761cc4e6df5104a34197ef0bae1358 Pull MFD updates from Lee Jones: "New Device Support - Add support for Power Supply to AXP813 - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803 - Add support for UART to Exynos LPASS Fix-ups: - Use supplied MACROS; ti_am335x_tscadc - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp - Regmap changes; bd9571mwv, wm5110-tables - Kconfig dependencies; MFD_AT91_USART - Supply shared data for child-devices; madera-core - Use new of_node_name_eq() API call; max77620, stmpe - Use managed resources (devm_*); tps65218 - Comment descriptions; ingenic-tcu - Coding style; madera-core Bug Fixes: - Fix section mismatches; twl-core, db8500-prcmu - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core - IRQ related fixes; tps6586x - Ensure proper initialisation sequence; qcom_rpm - Repair potential memory leak; cros_ec_dev" * tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: exynos-lpass: Enable UART module support mfd: mc13xxx: Fix a missing check of a register-read failure mfd: cros_ec: Add commands to control codec mfd: madera: Remove spurious semicolon in while loop mfd: rave-sp: Fix typo in rave_sp_checksum comment mfd: ingenic-tcu: Fix bit field description in header mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe() mfd: Use of_node_name_eq() for node name comparisons mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove mfd: axp20x: Add supported cells for AXP803 mfd: axp20x: Re-align MFD cell entries mfd: axp20x: Add AC power supply cell for AXP813 mfd: wm5110: Add missing ASRC rate register mfd: qcom_rpm: write fw_version to CTRL_REG mfd: tps6586x: Handle interrupts on suspend mfd: madera: Add shared data for accessory detection mfd: at91-usart: Add platform dependency mfd: bd9571mwv: Add volatile register to make DVFS work mfd: ab8500-core: Return zero in get_register_interruptible() mfd: tmio: Typo s/use use/use/ ... 
Pull MFD updates from Lee Jones:
 "New Device Support
   - Add support for Power Supply to AXP813
   - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
   - Add support for UART to Exynos LPASS

  Fix-ups:
   - Use supplied MACROS; ti_am335x_tscadc
   - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
   - Regmap changes; bd9571mwv, wm5110-tables
   - Kconfig dependencies; MFD_AT91_USART
   - Supply shared data for child-devices; madera-core
   - Use new of_node_name_eq() API call; max77620, stmpe
   - Use managed resources (devm_*); tps65218
   - Comment descriptions; ingenic-tcu
   - Coding style; madera-core

  Bug Fixes:
   - Fix section mismatches; twl-core, db8500-prcmu
   - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
   - IRQ related fixes; tps6586x
   - Ensure proper initialisation sequence; qcom_rpm
   - Repair potential memory leak; cros_ec_dev"

* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
  mfd: exynos-lpass: Enable UART module support
  mfd: mc13xxx: Fix a missing check of a register-read failure
  mfd: cros_ec: Add commands to control codec
  mfd: madera: Remove spurious semicolon in while loop
  mfd: rave-sp: Fix typo in rave_sp_checksum comment
  mfd: ingenic-tcu: Fix bit field description in header
  mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
  mfd: Use of_node_name_eq() for node name comparisons
  mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
  mfd: axp20x: Add supported cells for AXP803
  mfd: axp20x: Re-align MFD cell entries
  mfd: axp20x: Add AC power supply cell for AXP813
  mfd: wm5110: Add missing ASRC rate register
  mfd: qcom_rpm: write fw_version to CTRL_REG
  mfd: tps6586x: Handle interrupts on suspend
  mfd: madera: Add shared data for accessory detection
  mfd: at91-usart: Add platform dependency
  mfd: bd9571mwv: Add volatile register to make DVFS work
  mfd: ab8500-core: Return zero in get_register_interruptible()
  mfd: tmio: Typo s/use use/use/
  ...
mfd: exynos-lpass: Enable UART module support 2019-01-03T08:32:42+00:00 Beomho Seo beomho.seo@samsung.com 2018-12-21T14:32:28+00:00 3f2d347e851ef4464dea49504cde85e5eef67b2d This patch enables proper interrupts routing between UART module in Exynos Audio SubSystem and the rest of the SoC. This routing is completely transparent for UART device and CPU/GIC. UART driver requests interrupts from the respective controller and enables/masks/handles it by itself via standard methods. There are boards (for example TM2), which use UART module in Exynos Audio SubStem for communication with BlueTooth chip. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message, added UART reset] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
This patch enables proper interrupts routing between UART module
in Exynos Audio SubSystem and the rest of the SoC. This routing is
completely transparent for UART device and CPU/GIC. UART driver requests
interrupts from the respective controller and enables/masks/handles it
by itself via standard methods.

There are boards (for example TM2), which use UART module in Exynos Audio
SubStem for communication with BlueTooth chip.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message, added UART reset]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: mc13xxx: Fix a missing check of a register-read failure 2019-01-03T08:32:42+00:00 Kangjie Lu kjlu@umn.edu 2018-12-20T21:12:11+00:00 9e28989d41c0eab57ec0bb156617a8757406ff8a When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: madera: Remove spurious semicolon in while loop 2019-01-03T08:32:42+00:00 Richard Fitzgerald rf@opensource.cirrus.com 2018-12-14T14:39:14+00:00 4bcb83e055033592e8672a8deb7b209eed936e11 Coccinelle warning of a spurious semicolon on the closing brace of a while loop. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Coccinelle warning of a spurious semicolon on the closing brace
of a while loop.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rave-sp: Fix typo in rave_sp_checksum comment 2019-01-03T08:32:42+00:00 Yangtao Li tiny.windzz@gmail.com 2018-12-15T08:29:18+00:00 f7b1e49c670370eeb21e0d7feb7eaa2468ad7ae2 Caculated -> Calculated Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Caculated -> Calculated

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe() 2019-01-03T08:32:42+00:00 Keerthy j-keerthy@ti.com 2018-12-09T13:59:31+00:00 75d4c5e03c2ae9902ab521024b10291f6fc9515b Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Use devm_regmap_add_irq_chip and clean up error path in probe
and also the remove function.

Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: Use of_node_name_eq() for node name comparisons 2019-01-03T08:32:42+00:00 Rob Herring robh@kernel.org 2018-12-05T19:50:31+00:00 38df91cc0b82d053234accf4429eafd2f5a4d401 Convert string compares of DT node names to use of_node_name_eq() helper instead. This removes direct access to the node name pointer. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Convert string compares of DT node names to use of_node_name_eq() helper
instead. This removes direct access to the node name pointer.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>