linux-stable.git/drivers/mfd, branch linux-4.5.y

mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly

2016-06-08T01:18:49+00:00

commit 36e6d081cfb2cb64e6d8e5121cffb1e62f894d36 upstream.

GPIO lookup tables are supposed to be zero terminated. Let's do that
and avoid accidentally walking off the end.

Fixes: 61dd2ca2d44e ("mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal")
Signed-off-by: Ville Syrjälä 
Acked-by: Linus Walleij 
Acked-by: Daniel Vetter 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: intel-lpss: Save register context on suspend

2016-06-08T01:18:49+00:00

commit 41a3da2b8e1639d983192e3650670df4ecc94cf7 upstream.

All configurations are lost and the registers will have
default values when the hardware is suspended and resumed,
so saving the private register space context on suspend, and
restoring it on resume.

Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices)
Signed-off-by: Heikki Krogerus 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: omap-usb-tll: Fix scheduling while atomic BUG

2016-06-01T19:16:58+00:00

commit b49b927f16acee626c56a1af4ab4cb062f75b5df upstream.

We shouldn't be calling clk_prepare_enable()/clk_prepare_disable()
in an atomic context.

Fixes the following issue:

[    5.830970] ehci-omap: OMAP-EHCI Host Controller driver
[    5.830974] driver_register 'ehci-omap'
[    5.895849] driver_register 'wl1271_sdio'
[    5.896870] BUG: scheduling while atomic: udevd/994/0x00000002
[    5.896876] 4 locks held by udevd/994:
[    5.896904]  #0:  (&dev->mutex){......}, at: [] __driver_attach+0x60/0xac
[    5.896923]  #1:  (&dev->mutex){......}, at: [] __driver_attach+0x70/0xac
[    5.896946]  #2:  (tll_lock){+.+...}, at: [] omap_tll_enable+0x2c/0xd0
[    5.896966]  #3:  (prepare_lock){+.+...}, at: [] clk_prepare_lock+0x48/0xe0
[    5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine
[    5.897048] Preemption disabled at:[<  (null)>]   (null)
[    5.897051]
[    5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233
[    5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree)
[    5.897076] [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[    5.897087] [] (show_stack) from [] (dump_stack+0x88/0xc0)
[    5.897099] [] (dump_stack) from [] (__schedule_bug+0xac/0xd0)
[    5.897111] [] (__schedule_bug) from [] (__schedule+0x88/0x7e4)
[    5.897120] [] (__schedule) from [] (schedule+0x9c/0xc0)
[    5.897129] [] (schedule) from [] (schedule_preempt_disabled+0x14/0x20)
[    5.897140] [] (schedule_preempt_disabled) from [] (mutex_lock_nested+0x258/0x43c)
[    5.897150] [] (mutex_lock_nested) from [] (clk_prepare_lock+0x48/0xe0)
[    5.897160] [] (clk_prepare_lock) from [] (clk_prepare+0x10/0x28)
[    5.897169] [] (clk_prepare) from [] (omap_tll_enable+0x64/0xd0)
[    5.897180] [] (omap_tll_enable) from [] (usbhs_runtime_resume+0x18/0x17c)
[    5.897192] [] (usbhs_runtime_resume) from [] (pm_generic_runtime_resume+0x2c/0x40)
[    5.897202] [] (pm_generic_runtime_resume) from [] (__rpm_callback+0x38/0x68)
[    5.897210] [] (__rpm_callback) from [] (rpm_callback+0x70/0x88)
[    5.897218] [] (rpm_callback) from [] (rpm_resume+0x4ec/0x7ec)
[    5.897227] [] (rpm_resume) from [] (__pm_runtime_resume+0x4c/0x64)
[    5.897236] [] (__pm_runtime_resume) from [] (driver_probe_device+0x30/0x70)
[    5.897246] [] (driver_probe_device) from [] (__driver_attach+0x88/0xac)
[    5.897256] [] (__driver_attach) from [] (bus_for_each_dev+0x50/0x84)
[    5.897267] [] (bus_for_each_dev) from [] (bus_add_driver+0xcc/0x1e4)
[    5.897276] [] (bus_add_driver) from [] (driver_register+0xac/0xf4)
[    5.897286] [] (driver_register) from [] (do_one_initcall+0x100/0x1b8)
[    5.897296] [] (do_one_initcall) from [] (do_init_module+0x58/0x1c0)
[    5.897304] [] (do_init_module) from [] (SyS_finit_module+0x88/0x90)
[    5.897313] [] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x1c)
[    5.912697] ------------[ cut here ]------------
[    5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58
[    5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count())

Reported-by: H. Nikolaus Schaller 
Tested-by: H. Nikolaus Schaller 
Signed-off-by: Roger Quadros 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: intel-lpss: Remove clock tree on error path

2016-05-11T09:21:26+00:00

commit 84cb36cac581c915ef4e8b70abb73e084325df92 upstream.

We forgot to remove the clock tree if something goes wrong in ->probe(). Add a
call to intel_lpss_unregister_clock() on error path in ->probe() to fix the
potential issue.

Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices)
Signed-off-by: Andy Shevchenko 
Acked-by: Mika Westerberg 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

thermal: allow u8500-thermal driver to be a module

2016-02-09T22:18:23+00:00

When the thermal subsystem is a loadable module, the u8500 driver
fails to build:

drivers/thermal/built-in.o: In function `db8500_thermal_probe':
db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
drivers/thermal/built-in.o: In function `db8500_thermal_work':
db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'

This changes the symbol to a tristate, so Kconfig can track the
dependency correctly.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Eduardo Valentin

Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-01-17T20:32:01+00:00

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for v4.5.

  Notably there are big refactorings mostly by myself, aimed at getting
  the gpio_chip into a shape that makes me believe I can proceed to
  preserve state for a proper userspace ABI (character device) that has
  already been proposed once, but resulted in the feedback that I need
  to go back and restructure stuff.  So I've been restructuring stuff.
  On the way I ran into brokenness (return code from the get_value()
  callback) and had to fix it.  Also, refactored generic GPIO to be
  simpler.

  Some of that is still waiting to trickle down from the subsystems all
  over the kernel that provide random gpio_chips, I've touched every
  single GPIO driver in the kernel now, oh man I didn't know I was
  responsible for so much...

  Apart from that we're churning along as usual.

  I took some effort to test and retest so it should merge nicely and we
  shook out a couple of bugs in -next.

  Infrastructural changes:

   - In struct gpio_chip, rename the .dev node to .parent to better
     reflect the fact that this is not the GPIO struct device
     abstraction.  We will add that soon so this would be totallt
     confusing.

   - It was noted that the driver .get_value() callbacks was sometimes
     reporting negative -ERR values to the gpiolib core, expecting them
     to be propagated to consumer gpiod_get_value() and gpio_get_value()
     calls.  This was not happening, so as there was a mess of drivers
     returning negative errors and some returning "anything else than
     zero" to indicate that a line was active.  As some would have bit
     31 set to indicate "line active" it clashed with negative error
     codes.  This is fixed by the largeish series clamping values in all
     drivers with !!value to [0,1] and then augmenting the code to
     propagate error codes to consumers.  (Includes some ACKed patches
     in other subsystems.)

   - Add a void *data pointer to struct gpio_chip.  The container_of()
     design pattern is indeed very nice, but we want to reform the
     struct gpio_chip to be a non-volative, stateless business, and keep
     states internal to the gpiolib to be able to hold on to the state
     when adding a proper userspace ABI (character device) further down
     the road.  To achieve this, drivers need a handle at the internal
     state that is not dependent on their struct gpio_chip() so we add
     gpiochip_add_data() and gpiochip_get_data() following the pattern
     of many other subsystems.  All the "use gpiochip data pointer"
     patches transforms drivers to this scheme.

   - The Generic GPIO chip header has been merged into the general
      header, and the custom header for that
     removed.  Instead of having a separate mm_gpio_chip struct for
     these generic drivers, merge that into struct gpio_chip,
     simplifying the code and removing the need for separate and
     confusing includes.

  Misc improvements:

   - Stabilize the way GPIOs are looked up from the ACPI legacy
     specification.

   - Incremental driver features for PXA, PCA953X, Lantiq (patches from
     the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48

  New drivers:

   - Add a GPIO chip to the ALSA SoC AC97 driver.

   - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
     but the branch is merged here too to account for infrastructural
     changes).

   - The sx150x driver now supports the sx1502"

* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
  gpio: generic: make bgpio_pdata always visible
  gpiolib: fix chip order in gpio list
  gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
  gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
  gpio: brcmstb: Allow building driver for BMIPS_GENERIC
  gpio: brcmstb: Set endian flags for big-endian MIPS
  gpio: moxart: fix build regression
  gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
  leds: pca9532: use gpiochip data pointer
  leds: tca6507: use gpiochip data pointer
  hid: cp2112: use gpiochip data pointer
  bcma: gpio: use gpiochip data pointer
  avr32: gpio: use gpiochip data pointer
  video: fbdev: via: use gpiochip data pointer
  gpio: pch: Optimize pch_gpio_get()
  Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
  pinctrl: nsp-gpio: use gpiochip data pointer
  pinctrl: vt8500-wmt: use gpiochip data pointer
  pinctrl: exynos5440: use gpiochip data pointer
  pinctrl: at91-pio4: use gpiochip data pointer
  ...

Merge tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2016-01-14T18:53:15+00:00

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for s2mps15; sec-core
   - Add support for Lewisburg; lpc_ich
   - Add support for cs47l24 and wm1831; arizona

  New Functionality:
   - Allow user to select syscon register width; syscon

  Fix-ups:
   - Lots of Checkpatch fixes
   - Rename -pmic/-regulator; s2mps11
   - Build driver components into a single module; wm8994-*
   - Better handing of IRQ during suspend/resume; as3722
   - Constify things; da903x
   - Remove unused code; ab8500-core
   - Improve error handing; qcom_rpm
   - Simplify code: wm831x-otp, sta2x11-mfd
   - Improve locking; cros_ec_spi
   - Fix incorrect DT binding filename reference; arizona, palmas,
     snps-dwapb-gpio, wm8994

  Bug Fixes:
   - Fix broken SYSFS 'show ID' call; wm831x-otp
   - Protect reads from non-existent registers; qcom-spmi-pmic
   - Repair build warnings; as3722
   - Fix IRQ request ordering; arizona-irq
   - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
     htc-egpio, dm355evm_msp, asic3"

* tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits)
  mfd: davinci_voicecodec: Remove pointless 'out of memory' error message
  mfd: da9052-irq: Fix trivial 'space before comma' error
  mfd: da9052-i2c: Fix tabbing/whitespace issue
  mfd: da903x: Fix white space and split string issues
  mfd: cs5535-mfd: Add missing line spacing and make local array static
  mfd: cros_ec_spi: Repair comparison ordering issue
  mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.
  mfd: asic3: Fix a plethora of Checkpatch errors and warnings
  mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings
  mfd: arizona-i2c: Add blank line formatting after declaration
  mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead
  mfd: adp5520: Some trivial 'no space before tab' fixes
  mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues
  mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error
  mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting
  mfd: ab8500-core: Fix many warnings reported by Checkpatch
  mfd: ab2100-otp: Remove pointless 'out of memory' error message
  mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch
  mfd: aat2870-core: Remove unnecessary 'out of memory' message
  mfd: 88pm860x-core: Fix commenting and declaration spacing
  ...

mfd: davinci_voicecodec: Remove pointless 'out of memory' error message

2016-01-14T08:44:05+00:00

WARNING: Possible unnecessary 'out of memory' message
+       if (!davinci_vc) {
+               dev_dbg(&pdev->dev,

total: 0 errors, 1 warnings, 154 lines checked

Signed-off-by: Lee Jones

mfd: da9052-irq: Fix trivial 'space before comma' error

2016-01-14T08:44:04+00:00

ERROR: space prohibited before that ',' (ctx:WxW)
+       da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);

total: 1 errors, 0 warnings, 290 lines checked

Cc: Support Opensource 
Signed-off-by: Lee Jones

mfd: da9052-i2c: Fix tabbing/whitespace issue

2016-01-14T08:44:03+00:00

WARNING: suspect code indent for conditional statements (8, 24)
+       if (!i2c_safe_reg(reg))
+                       return regmap_read(da9052->regmap,

total: 0 errors, 1 warnings, 226 lines checked

Cc: Support Opensource 
Signed-off-by: Lee Jones