Pull mtd updates from Miquel Raynal:
 "Raw NAND changes:
   - Sunxi: Support added for the H616 compatible
   - Qcom: Support added for the MDM9607 compatible
   - Support for the Toshiba TC58NVG1S3H part
   - GPMI: New debugfs entry to expose the chip geometry
   - PL353: Timing updates and software ECC support have been fixed

  SPI NAND changes:
   - fmsh: Support added for FM25G{01,02}B chips
   - HeYangTek: Support added for HYF1GQ4UDACAE

  Aside from these main changes, there is a high load of misc fixes and
  hardening changes, and exceptionally no SPI NOR change"

* tag 'mtd/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
  mtd: rawnand: sunxi: fix H6/H616 controller timings
  mtd: rawnand: sunxi: describe tADL and tWHR delays
  mtd: rawnand: sunxi: group controller delay tables
  mtd: maps: remove dead select of MTD_CFI_BE_BYTE_SWAP
  mtd: rawnand: gpmi: add debugfs entry for BCH geometry
  mtd: rawnand: validate ONFI extended parameter page sections
  mtd: rawnand: sunxi: add H616 MBUS DMA support
  mtd: spinand: fmsh: fix FM25G01B/FM25G02B Quad I/O read dummy cycles
  mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
  mtd: mpc5121_nfc: use platform for irq and ioremap
  mtd: mtdoops: free page bitmap when the backing MTD is removed
  mtd: mtdswap: Avoid freeing registered blktrans device twice
  mtd: afs: validate v2 image info bounds
  mtd: intel-dg: Fix runtime PM error path in probe
  mtd: nand-omap2: Move omap_nand_ids[] to raw nand driver
  mtd: rawnand: add Toshiba TC58NVG1S3H
  mtd: nand: realtek-ecc: add missing MODULE_DEVICE_TABLE()
  mtd: rawnand: qcom: Add MDM9607 compatible
  mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2
  mtd: rawnand: qcom: Make "aon" clock optional
  ...

Memory controller drivers for v7.3

1. Few improvements: STM32 OMM, Tegra MC and JZ4780-nemc.

2. Refactor Tegra MC interconnect code to better represent actual
   hardware in multi-socket NUMA cases.

* tag 'memory-controller-drv-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: jz4780-nemc: Use dev_err_probe() for clock error
  memory: tegra: Guard against NULL mc_regs in IRQ handler
  memory: tegra: add multi-socket support to the memory interconnect
  memory: stm32_omm: initialize ret in stm32_omm_set_amcr

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use dev_err_probe() to simplify clock acquisition error handling and
avoid logging probe deferral as an error.

No functional change.

Signed-off-by: Miles Krause <mileskrause5200@gmail.com>
Link: https://patch.msgid.link/20260711-jz4780-nemc-dev-err-probe-v1-1-afb6f6a82752@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Defining a static array in a header results in each .c file that
includes the header (here: drivers/memory/omap-gpmc.c and
drivers/mtd/nand/raw/omap2.c) to contain a copy of that array when
compiled to an object file.

With sizeof(struct of_device_id[3]) ≥ 588 having omap_nand_ids[] twice
just to do two string comparisons is quite some bloat. So move
omap_nand_ids[] to the nand driver which actually needs that array for
its module meta data and do the compatible check by hand.

bloat-o-meter reports for drivers/memory/omap-gpmc.o (ARCH=arm):

	add/remove: 1/2 grow/shrink: 1/0 up/down: 28/-588 (-560)
	Function                                     old     new   delta
	gpmc_probe_generic_child                    2108    2136     +28
	omap_nand_ids                                588       -    -588
	Total: Before=18114, After=17554, chg -3.09%

(drivers/mtd/nand/raw/omap2.o doesn't change).

This allows to drop <linux/mod_devicetable.h> from
include/linux/platform_data/mtd-nand-omap2.h (which is my original
motivation for this change). Note that this header isn't needed in the
two drivers because omap-gpmc.c doesn't use any device id struct and for
the nand driver omap2.c of_device_id is already provided via
<linux/platform_device.h>.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The per-error decode in tegra30_mc_handle_irq() dereferences
mc->soc->regs unconditionally. This 'regs' structure is optional and is
only used for decoding and logging MC error interrupts. The rest of the
MC functionality does not depend on it.

When adding support for the Tegra238 SoC, the 'regs' structure was
initially omitted because it is only used for error logging. We found
that this resulted in a NULL pointer dereference in IRQ context, causing
a crash when an MC error interrupt fired. Although existing upstream
devices will not hit this condition because 'regs' is present, guard
against it to improve the robustness of the driver.

Skip the decode and just clear the interrupt when mc_regs is NULL. This
bypasses the error interrupt logging while keeping the remaining MC
functionality intact.

Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://patch.msgid.link/20260703045653.395498-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Add support for representing each memory-controller instance (one
per NUMA node / socket) as its own interconnect (ICC) provider,
with its own MC client nodes, to match the hardware topology on
multi-socket Tegra SoCs.

Use the NUMA node ID to make client IDs globally unique across
per-socket providers, since the ICC framework allocates node IDs
from a single global IDR. Per-socket MC and EMC node names are
also derived from dev_name() so they match the corresponding
debugfs subdirectory. On single-socket platforms (NUMA_NO_NODE)
the existing client IDs and node-name strings are preserved.

Each socket's MC and EMC therefore get their own debugfs
subdirectory under /sys/kernel/debug/{mc,emc}/. The parent
directories are created on first probe.

Bandwidth requests from MC clients in a socket are routed to
that socket's local BPMP.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260626131423.3986998-1-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>

stm32_omm_set_amcr() returns ret after checking whether the AMCR value
matches the device tree description. On the normal matching path ret is
not otherwise assigned, so initialize it to 0 before the checks.

Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260617182202.961843-1-ruoyuw560@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Pull SoC driver updates from Arnd Bergmann:
 "There are a few added drivers, but mostly the normal maintenance to
  drivers for firmware, memory controller and other soc specific
  hardware:

   - The NXP QuickEngine gets modern MSI support, which allows some
     cleanups to the GICv3 irqchip chip driver

   - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
     encapsulating support for the on-chip mailbox and hwspinlock
     implementations that are not easily separated into individual
     drivers

   - The Qualcomm SoC drivers add support for additional SoC
     implementations, and flexibility around power management for the
     serial-engine driver as well as probing the LLCC driver using
     custom hardware descriptions inside of the device itself.

   - Added support for the Samsung thermal management unit

   - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
     APIs and allow multiple PMC instances everywhere.

   - Updates to the TI SCI and KNAS drivers to improve suspend/resume
     support.

   - Minor driver changes for mediatek, xilinx, allwinner, aspeed,
     tegra, broadcom, amd, microchip and starfive specific drivers

   - Memory controller updates for Tegra and Renesas for additional SoC
     types and other improvements.

   - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
     update driver probing, object lifetimes and address minor bugs"

* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
  Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
  memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
  memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
  memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  firmware: tegra: bpmp: Add support for multi-socket platforms
  firmware: tegra: bpmp: Propagate debugfs errors
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  ...

Pull thermal control updates from Rafael Wysocki:
 "These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
  Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
  the thermal control core and drivers, clean up code and refactor it in
  preparation for future changes:

   - Rework the initialization and cleanup of thermal class cooling
     devices to separate DT-based cooling device registration and
     cooling device registration without DT (Daniel Lezcano, Ovidiu
     Panait)

   - Update the cooling device DT bindings to support 3-cell cooling
     device representation, where the additional cell holds an ID to
     select a cooling mechanism for devices that offer multiple cooling
     mechanisms, and adjust the cooling device registration code
     accordingly (Gaurav Kohli, Daniel Lezcano)

   - Remove dead code from two functions in the thermal core and
     simplify the unregistration of thermal governors (Rafael Wysocki)

   - Fix critical temperature attribute removal handling in the generic
     thermal zone hwmon support code and rework that code to register a
     separate hwmon class device for each thermal zone (instead of using
     one hwmon class device for all thermal zones of the same type) to
     address thermal zone removal deadlocks (Rafael Wysocki)

   - Use attribute groups for adding temperature attributes to hwmon
     class devices associated with thermal zones (Rafael Wysocki)

   - Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
     Crivellari)

   - Fix potential shift overflow in ptc_mmio_write() and improve error
     handling in proc_thermal_ptc_add() in the int340x thermal control
     driver (Aravind Anilraj)

   - Use sysfs_emit() for cpumask printing in the Intel powerclamp
     thermal driver (Yury Norov)

   - Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
     Pandruvada)

   - Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
     (Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)

   - Use devm_add_action_or_reset() for clock disable on the NVidia
     soctherm and switch it to devm cooling device registration version
     (Daniel Lezcano)

   - Add the Amlogic T7 thermal sensor along with thermal calibration
     data read from SMC calls (Ronald Claveau)

   - Fix atomic temperature read in the QCom tsens driver to comply with
     hardware documentation (Priyansh Jain)

   - Add SpacemiT K1 thermal sensor support (Shuwei Wu)

   - Add i.MX93 temperature sensor support and filter out the invalid
     temperature (Jacky Bai)

   - Enable by default the TMU (Thermal Monitoring Unit) on Exynos
     platform (Krzysztof Kozlowski)

   - Rework interrupt initialization in the Tsens driver and add the
     optional wakeup source (Priyansh Jain)

   - Fix typo in a comment in the TSens QCom driver (Jinseok Kim)

   - Fix trailing whitespace and repeated word in the OF code, remove
     quoted string splitting across lines from the iMX7 driver, and
     remove a stray space from the thermal_trip_of_attr() macro
     definition (Mayur Kumar)

   - Update the thermal testing facility code to avoid NULL pointer
     dereferences by rejecting missing command arguments and replace
     sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
     Panait, Samuel Moelius)"

* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  thermal: sysfs: Replace sscanf() with kstrtoul()
  thermal: testing: Replace sscanf() with kstrtoint()
  thermal: testing: reject missing command arguments
  thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
  thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
  thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
  thermal/core: Fix missing stub for devm_thermal_cooling_device_register
  dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
  thermal/of: Support cooling device ID in cooling-spec
  thermal/of: Pass cdev_id and introduce devm registration helper
  thermal/of: Add cooling device ID support
  thermal/of: Rename the devm_thermal_of_cooling_device_register() function
  thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
  thermal/of: Move cooling device OF helpers out of thermal core
  hwmon: Use non-OF thermal cooling device registration API
  thermal/core: Add devm_thermal_cooling_device_register()
  thermal/core: Introduce non-OF thermal_cooling_device_register()
  thermal/drivers/samsung: Enable TMU by default
  thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
  thermal/drivers/qoriq: Add i.MX93 tmu support
  ...