linux-stable.git/drivers/memory/emif.c, branch linux-5.6.y

memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'

2019-10-29T16:57:57+00:00

drivers/memory/emif.c:1616:9: warning:
 variable cs1_used set but not used [-Wunused-but-set-variable]
drivers/memory/emif.c:1624:36: warning:
 variable custom_configs set but not used [-Wunused-but-set-variable]

They are never used since introduction.

Signed-off-by: YueHaibing 
Signed-off-by: Santosh Shilimkar

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-07-20T00:13:56+00:00

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

   - A driver for SCU (system control) on NXP i.MX8QXP

   - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)

   - Qualcomm PM support for MSM8998

   - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)

   - Reset controller support for Bitmain BM1880

   - TI SCI (System Control Interface) support for CPU control on AM654
     processors

   - More TI sysc refactoring and rework"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
  reset: remove redundant null check on pointer dev
  soc: rockchip: work around clang warning
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  soc: imx: Add i.MX8MN SoC driver support
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: qcom: geni: Add support for ACPI
  firmware: ti_sci: Fix gcc unused-but-set-variable warning
  firmware: ti_sci: Use the correct style for SPDX License Identifier
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  firmware/psci: psci_checker: Park kthreads before stopping them
  memory: move jedec_ddr.h from include/memory to drivers/memory/
  memory: move jedec_ddr_data.c from lib/ to drivers/memory/
  MAINTAINERS: Remove myself as qcom maintainer
  soc: aspeed: lpc-ctrl: make parameter optional
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  memory: tegra: Fix -Wunused-const-variable
  firmware: tegra: Early resume BPMP
  soc/tegra: Select pinctrl for Tegra194
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

memory: move jedec_ddr.h from include/memory to drivers/memory/

2019-06-17T11:45:21+00:00

Now that jedec_ddr_data.c was moved from lib/ to drivers/memory/,
 is included only from drivers/memory/.

Make it a local header of drivers/memory/.

The directory include/memory is now gone.

While I am here, I also changed #include  to
. Because CONFIG_DDR is bool, jedec_ddr_data.c is
never compiled as a module.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Olof Johansson

memory-EMIF: Use seq_putc() in emif_regdump_show()

2018-03-06T00:21:26+00:00

A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring 
Signed-off-by: Santosh Shilimkar

drivers/memory: don't check resource with devm_ioremap_resource

2013-05-18T09:55:52+00:00

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang

memory: emif: Load the correct custom config values from dt

2013-03-25T20:18:13+00:00

of_get_property returns value in Big Endian format.
Before using this value it should be converted to little endian
using be32_to_cpup().
Custom configs of emif are read from dt using of_get_property,
but these are not converted to litte endian format.
Correcting the same here.

Signed-off-by: Lokesh Vutla 
Acked-by: Santosh Shilimkar 
Signed-off-by: Greg Kroah-Hartman

memory: emif: errata i743: Prohibit usage of Power-Down mode

2013-03-25T20:18:13+00:00

ERRATA DESCRIPTION :
The EMIF supports power-down state for low power. The EMIF
automatically puts the SDRAM into power-down after the memory is
not accessed for a defined number of cycles and the
EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4.
As the EMIF supports automatic output impedance calibration, a ZQ
calibration long command is issued every time it exits active
power-down and precharge power-down modes. The EMIF waits and
blocks any other command during this calibration.
The EMIF does not allow selective disabling of ZQ calibration upon
exit of power-down mode. Due to very short periods of power-down
cycles, ZQ calibration overhead creates bandwidth issues and
increases overall system power consumption. On the other hand,
issuing ZQ calibration long commands when exiting self-refresh is
still required.

WORKAROUND :
Because there is no power consumption benefit of the power-down due
to the calibration and there is a performance risk, the guideline
is to not allow power-down state and, therefore, to not have set
the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4.

This is applicable only for EMIF4D IP used in OMAP4 Soc's.

Signed-off-by: Grygorii Strashko 
Signed-off-by: Vitaly Chernooky 
Signed-off-by: Oleksandr Dmytryshyn 
Signed-off-by: Lokesh Vutla 
Acked-by: Santosh Shilimkar 
Signed-off-by: Greg Kroah-Hartman

memory: emif: Fix the incorrect 'size' parameter in memcpy

2013-03-25T20:18:12+00:00

The issue was that only the first timings table was added to the
emif platform data at the emif driver registration. All other
timings tables was filled with zeros. Now all emif timings table
are added to the platform data.

Signed-off-by: Oleksandr Dmytryshyn 
Signed-off-by: Lokesh Vutla 
Acked-by: Santosh Shilimkar 
Signed-off-by: Greg Kroah-Hartman

memory: emif: use restart if power_off not present when out of spec

2013-03-25T20:18:12+00:00

Some machine or kernel variants might have missed implementation
of power off handlers. We DONOT want to let the system be in
"out of spec" state in this condition. So, WARN and attempt
a machine restart in the hopes of clearing the out-of-spec
temperature condition.

NOTE: This is not the safest option, but safer than leaving the
system in unstable conditions.

Signed-off-by: Nishanth Menon 
Signed-off-by: Lokesh Vutla 
Acked-by: Santosh Shilimkar 
Signed-off-by: Greg Kroah-Hartman