linux-stable.git/drivers/media, branch v5.9.2

media: venus: core: Fix runtime PM imbalance in venus_probe

2020-10-29T09:12:12+00:00

[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced. For other error
paths after this call, things are the same.

Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable'
label. But in this case, the error path after pm_runtime_put_sync()
will decrease PM usage counter twice. Thus add an extra
pm_runtime_get_noresume() in this path to balance PM counter.

Signed-off-by: Dinghao Liu 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: venus: core: Fix error handling in probe

2020-10-29T09:12:11+00:00

[ Upstream commit 98cd831088c64aa8fe7e1d2a8bb94b6faba0462b ]

Post a successful pm_ops->core_get, an error in probe
should exit by doing a pm_ops->core_put which seems
to be missing. So fix it.

Signed-off-by: Rajendra Nayak 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: venus: fixes for list corruption

2020-10-29T09:12:11+00:00

[ Upstream commit e1c69c4eef61ffe295b747992c6fd849e6cd747d ]

There are few list handling issues while adding and deleting
node in the registered buf list in the driver.
1. list addition - buffer added into the list during buf_init
while not deleted during cleanup.
2. list deletion - In capture streamoff, the list was reinitialized.
As a result, if any node was present in the list, it would
lead to issue while cleaning up that node during buf_cleanup.

Corresponding call traces below:
[  165.751014] Call trace:
[  165.753541]  __list_add_valid+0x58/0x88
[  165.757532]  venus_helper_vb2_buf_init+0x74/0xa8 [venus_core]
[  165.763450]  vdec_buf_init+0x34/0xb4 [venus_dec]
[  165.768271]  __buf_prepare+0x598/0x8a0 [videobuf2_common]
[  165.773820]  vb2_core_qbuf+0xb4/0x334 [videobuf2_common]
[  165.779298]  vb2_qbuf+0x78/0xb8 [videobuf2_v4l2]
[  165.784053]  v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem]
[  165.789067]  v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem]
[  165.794624]  v4l_qbuf+0x48/0x58

[ 1797.556001] Call trace:
[ 1797.558516]  __list_del_entry_valid+0x88/0x9c
[ 1797.562989]  vdec_buf_cleanup+0x54/0x228 [venus_dec]
[ 1797.568088]  __buf_prepare+0x270/0x8a0 [videobuf2_common]
[ 1797.573625]  vb2_core_qbuf+0xb4/0x338 [videobuf2_common]
[ 1797.579082]  vb2_qbuf+0x78/0xb8 [videobuf2_v4l2]
[ 1797.583830]  v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem]
[ 1797.588843]  v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem]
[ 1797.594389]  v4l_qbuf+0x48/0x58

Signed-off-by: Vikash Garodia 
Reviewed-by: Fritz Koenig 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: saa7134: avoid a shift overflow

2020-10-29T09:12:11+00:00

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch:
	drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: uvcvideo: Ensure all probed info is returned to v4l2

2020-10-29T09:12:11+00:00

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during
probing, resulting in the camera choosing a different format than
expected. v4l2 can already accommodate such changes, but the code was
not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload
incorrectly, causing corrupted output. This was happening on the
Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating,
but it is still a valid thing for the camera to do. Both macOS and Windows
will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video
from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

Signed-off-by: Adam Goode 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: media/pci: prevent memory leak in bttv_probe

2020-10-29T09:12:10+00:00

[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]

In bttv_probe if some functions such as pci_enable_device,
pci_set_dma_mask and request_mem_region fails the allocated
 memory for btv should be released.

Signed-off-by: Xiaolong Huang 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: bdisp: Fix runtime PM imbalance on error

2020-10-29T09:12:10+00:00

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu 
Reviewed-by: Fabien Dessenne 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: platform: sti: hva: Fix runtime PM imbalance on error

2020-10-29T09:12:10+00:00

[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: platform: s3c-camif: Fix runtime PM imbalance on error

2020-10-29T09:12:09+00:00

[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.

Signed-off-by: Dinghao Liu 
Reviewed-by: Sylwester Nawrocki 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: vsp1: Fix runtime PM imbalance on error

2020-10-29T09:12:09+00:00

[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu 
Reviewed-by: Kieran Bingham 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin