linux-stable.git/drivers/media, branch v5.7.2

media: dvbdev: Fix tuner->demod media controller link

2020-06-07T09:32:56+00:00

commit 9f984cacf4f4d53fd8a3f44d7f13528b81c1f6a8 upstream.

Fixes bug exposed by:

[a3fbc2e6bb0: media: mc-entity.c: use WARN_ON, validate link pads]

The dvbdev incorrectly requests a tuner sink pad to connect to a demux
sink pad. The media controller failure percolates back and the dvb device
creation fails. Fix this by requesting a tuner source pad. Instead of
forcing that pad to be index zero, check if a negative integer error
is returned. A note is added that first source pad found is chosen.

Affected bridges cx231xx and em28xx printed the below warning[s]
when a variety of media controller dvb enabled devices were connected.
The warning returns an error causing all affected devices to fail DVB
device creation.

[  253.138332] ------------[ cut here ]------------
[  253.138339] WARNING: CPU: 0 PID: 1550 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  253.138339] Modules linked in: si2168 em28xx_dvb(+) em28xx si2157 lgdt3306a cx231xx_dvb dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core eda
c_mce_amd kvm nls_iso8859_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_in
tel video snd_intel_dspcfg ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_p
c ppdev lp parport ip_tables x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt
[  253.138370]  gpio_generic
[  253.138372] CPU: 0 PID: 1550 Comm: modprobe Tainted: G        W         5.7.0-rc2+ #181
[  253.138373] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  253.138376] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  253.138378] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  253.138379] RSP: 0018:ffffb9ecc0ee7a78 EFLAGS: 00010246
[  253.138380] RAX: ffff943f706c99d8 RBX: 0000000000000000 RCX: 0000000000000000
[  253.138381] RDX: ffff943f613e0180 RSI: 0000000000000000 RDI: ffff943f706c9958
[  253.138381] RBP: ffffb9ecc0ee7ab0 R08: 0000000000000001 R09: ffff943f613e0180
[  253.138382] R10: ffff943f613e0180 R11: ffff943f706c9400 R12: 0000000000000000
[  253.138383] R13: 0000000000000001 R14: ffff943f706c9958 R15: 0000000000000001
[  253.138384] FS:  00007f3cd29ba540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  253.138385] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.138385] CR2: 000055f7de0ca830 CR3: 00000003dd208000 CR4: 00000000003406f0
[  253.138386] Call Trace:
[  253.138392]  media_create_pad_links+0x104/0x1b0 [mc]
[  253.138397]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  253.138402]  em28xx_dvb_init+0x5ea/0x2600 [em28xx_dvb]
[  253.138408]  em28xx_register_extension+0x63/0xc0 [em28xx]
[  253.138410]  ? 0xffffffffc039c000
[  253.138412]  em28xx_dvb_register+0x15/0x1000 [em28xx_dvb]
[  253.138416]  do_one_initcall+0x71/0x250
[  253.138418]  ? do_init_module+0x27/0x22e
[  253.138421]  ? _cond_resched+0x1a/0x50
[  253.138423]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  253.138425]  ? __vunmap+0x1e3/0x240
[  253.138427]  do_init_module+0x5f/0x22e
[  253.138430]  load_module+0x2525/0x2d40
[  253.138436]  __do_sys_finit_module+0xe5/0x120
[  253.138438]  ? __do_sys_finit_module+0xe5/0x120
[  253.138442]  __x64_sys_finit_module+0x1a/0x20
[  253.138443]  do_syscall_64+0x57/0x1b0
[  253.138445]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  253.138446] RIP: 0033:0x7f3cd24dc839
[  253.138448] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  253.138449] RSP: 002b:00007ffe4fc514d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  253.138450] RAX: ffffffffffffffda RBX: 000055a9237f63f0 RCX: 00007f3cd24dc839
[  253.138451] RDX: 0000000000000000 RSI: 000055a922c3ad2e RDI: 0000000000000000
[  253.138451] RBP: 000055a922c3ad2e R08: 0000000000000000 R09: 0000000000000000
[  253.138452] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[  253.138453] R13: 000055a9237f5550 R14: 0000000000040000 R15: 000055a9237f63f0
[  253.138456] ---[ end trace a60f19c54aa96ec4 ]---

[  234.915628] ------------[ cut here ]------------
[  234.915640] WARNING: CPU: 0 PID: 1502 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  234.915641] Modules linked in: si2157 lgdt3306a cx231xx_dvb(+) dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core edac_mce_amd kvm nls_iso8859
_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_intel video snd_intel_dspcf
g ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tab
les x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt gpio_generic
[  234.915700] CPU: 0 PID: 1502 Comm: modprobe Not tainted 5.7.0-rc2+ #181
[  234.915702] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  234.915709] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  234.915712] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  234.915714] RSP: 0018:ffffb9ecc1b6fa50 EFLAGS: 00010246
[  234.915717] RAX: ffff943f8c94a9d8 RBX: 0000000000000000 RCX: 0000000000000000
[  234.915719] RDX: ffff943f613e0900 RSI: 0000000000000000 RDI: ffff943f8c94a958
[  234.915721] RBP: ffffb9ecc1b6fa88 R08: 0000000000000001 R09: ffff943f613e0900
[  234.915723] R10: ffff943f613e0900 R11: ffff943f6b590c00 R12: 0000000000000000
[  234.915724] R13: 0000000000000001 R14: ffff943f8c94a958 R15: 0000000000000001
[  234.915727] FS:  00007f4ca3646540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  234.915729] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  234.915731] CR2: 00007fff7a53ba18 CR3: 00000003da614000 CR4: 00000000003406f0
[  234.915733] Call Trace:
[  234.915745]  media_create_pad_links+0x104/0x1b0 [mc]
[  234.915756]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  234.915766]  dvb_init.part.4+0x691/0x1360 [cx231xx_dvb]
[  234.915780]  dvb_init+0x1a/0x20 [cx231xx_dvb]
[  234.915787]  cx231xx_register_extension+0x71/0xa0 [cx231xx]
[  234.915791]  ? 0xffffffffc042f000
[  234.915796]  cx231xx_dvb_register+0x15/0x1000 [cx231xx_dvb]
[  234.915802]  do_one_initcall+0x71/0x250
[  234.915807]  ? do_init_module+0x27/0x22e
[  234.915811]  ? _cond_resched+0x1a/0x50
[  234.915816]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  234.915820]  ? __vunmap+0x1e3/0x240
[  234.915826]  do_init_module+0x5f/0x22e
[  234.915831]  load_module+0x2525/0x2d40
[  234.915848]  __do_sys_finit_module+0xe5/0x120
[  234.915850]  ? __do_sys_finit_module+0xe5/0x120
[  234.915862]  __x64_sys_finit_module+0x1a/0x20
[  234.915865]  do_syscall_64+0x57/0x1b0
[  234.915870]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  234.915872] RIP: 0033:0x7f4ca3168839
[  234.915876] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  234.915878] RSP: 002b:00007ffcea3db3b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  234.915881] RAX: ffffffffffffffda RBX: 000055af22c29340 RCX: 00007f4ca3168839
[  234.915882] RDX: 0000000000000000 RSI: 000055af22c38390 RDI: 0000000000000001
[  234.915884] RBP: 000055af22c38390 R08: 0000000000000000 R09: 0000000000000000
[  234.915885] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
[  234.915887] R13: 000055af22c29060 R14: 0000000000040000 R15: 0000000000000000
[  234.915896] ---[ end trace a60f19c54aa96ec3 ]---

Signed-off-by: Brad Love 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-03-30T22:05:01+00:00

Pull power management updates from Rafael Wysocki:
 "These clean up and rework the PM QoS API, address a suspend-to-idle
  wakeup regression on some ACPI-based platforms, clean up and extend a
  few cpuidle drivers, update multiple cpufreq drivers and cpufreq
  documentation, and fix a number of issues in devfreq and several other
  things all over.

  Specifics:

   - Clean up and rework the PM QoS API to simplify the code and reduce
     the size of it (Rafael Wysocki).

   - Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and
     similar platforms where the USB plug/unplug events are handled by
     the EC (Rafael Wysocki).

   - CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
     Ulf Hansson).

   - Extend the haltpoll cpuidle driver so that it can be forced to run
     on some systems where it refused to load (Maciej Szmigiero).

   - Convert several cpufreq documents to the .rst format and move the
     legacy driver documentation into one common file (Mauro Carvalho
     Chehab, Rafael Wysocki).

   - Update several cpufreq drivers:

        * Extend and fix the imx-cpufreq-dt driver (Anson Huang).

        * Improve the -EPROBE_DEFER handling and fix unwanted CPU
          overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
          Christoph Niedermaier).

        * Add support for Krait based SoCs to the qcom driver (Ansuel
          Smith).

        * Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).

        * Add platform specific intermediate callbacks support to
          cpufreq-dt and update the imx6q driver (Peng Fan).

        * Simplify and consolidate some pieces of the intel_pstate
          driver and update its documentation (Rafael Wysocki, Alex
          Hung).

   - Fix several devfreq issues:

        * Remove unneeded extern keyword from a devfreq header file and
          use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
          DEVFREQ_GOV_INTERNAL (Chanwoo Choi).

        * Fix the handling of dev_pm_qos_remove_request() result
          (Leonard Crestez).

        * Use constant name for userspace governor (Pierre Kuo).

        * Get rid of doc warnings and fix a typo (Christophe JAILLET).

   - Use built-in RCU list checking in some places in the PM core to
     avoid false-positive RCU usage warnings (Madhuparna Bhowmik).

   - Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM
     QoS routines (Qian Cai).

   - Fix removal of wakeup sources to avoid NULL pointer dereferences in
     a corner case (Neeraj Upadhyay).

   - Clean up the handling of hibernate compat ioctls and fix the
     related documentation (Eric Biggers).

   - Update the idle_inject power capping driver to use variable-length
     arrays instead of zero-length arrays (Gustavo Silva).

   - Fix list format in a PM QoS document (Randy Dunlap).

   - Make the cpufreq stats module use scnprintf() to avoid potential
     buffer overflows (Takashi Iwai).

   - Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).

   - Allow no domain-idle-states DT property in generic PM domains (Ulf
     Hansson).

   - Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
     Smythies)"

* tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits)
  cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
  tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
  ACPI: PM: s2idle: Refine active GPEs check
  ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
  PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
  PM / devfreq: Get rid of some doc warnings
  PM / devfreq: Fix handling dev_pm_qos_remove_request result
  PM / devfreq: Fix a typo in a comment
  PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
  PM / devfreq: Remove unneeded extern keyword
  PM / devfreq: Use constant name of userspace governor
  ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
  cpufreq: qcom: Add support for krait based socs
  cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
  cpufreq: Use scnprintf() for avoiding potential buffer overflow
  cpuidle: psci: Split psci_dt_cpu_init_idle()
  PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
  PM / hibernate: Remove unnecessary compat ioctl overrides
  PM: hibernate: fix docs for ioctls that return loff_t via pointer
  Documentation: intel_pstate: update links for references
  ...

Merge branch 'pm-qos'

2020-03-30T12:45:57+00:00

* pm-qos: (30 commits)
  PM: QoS: annotate data races in pm_qos_*_value()
  Documentation: power: fix pm_qos_interface.rst format warning
  PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE
  Documentation: PM: QoS: Update to reflect previous code changes
  PM: QoS: Update file information comments
  PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions
  sound: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*()
  drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*()
  drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*()
  x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()
  cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request()
  PM: QoS: Add CPU latency QoS API wrappers
  PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h
  PM: QoS: Simplify definitions of CPU latency QoS trace events
  ...

media: venus: firmware: Ignore secure call error on first resume

2020-03-30T09:28:18+00:00

With the latest cleanup in qcom scm driver the secure monitor
call for setting the remote processor state returns EINVAL when
it is called for the first time and after another scm call
auth_and_reset. The error returned from scm call could be ignored
because the state transition is already done in auth_and_reset.

Acked-by: Bjorn Andersson 
Signed-off-by: Stanimir Varbanov 
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab

media: mtk-vpu: load vpu firmware from the new location

2020-03-24T16:11:47+00:00

mt8173 VPU firmware has been moved to a sub-folder of
linux-firmware, so load vpu-fw from the new location first,
if it fails, then from the old one.

Signed-off-by: Rui Wang 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: i2c: video-i2c: fix build errors due to 'imply hwmon'

2020-03-24T16:11:27+00:00

Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.

Issue build log:

ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info

Cc: rdunlap@infradead.org
Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx)
Signed-off-by: Matt Ranostay 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vivid: fix incorrect PA assignment to HDMI outputs

2020-03-24T16:06:24+00:00

The initial physical address was one too low for the outputs.
E.g. if 1.0.0.0 was expected, then it was set to 0.0.0.0, and
2.0.0.0 became 1.0.0.0.

Signed-off-by: Hans Verkuil 
Cc: Johan Korsnes 
Fixes: 4ee895e71abb ("media: vivid: reorder CEC allocation and control set-up")
Signed-off-by: Mauro Carvalho Chehab

media: siano: Use scnprintf() for avoiding potential buffer overflow

2020-03-20T15:28:07+00:00

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

media: rc: Use scnprintf() for avoiding potential buffer overflow

2020-03-20T15:27:42+00:00

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

media: cec-notifier: make cec_notifier_get_conn() static

2020-03-20T08:02:45+00:00

This function is no longer used by other drivers, so it can be
made static.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab