linux-stable.git/drivers/media, branch v5.5.8 Linux kernel stable tree media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value 2020-02-24T07:38:40+00:00 Sergey Zakharchenko szakharchenko@digital-loggers.com 2019-10-03T09:31:23+00:00 5685aaf4b1de8db823a53567194625d7af200a2b [ Upstream commit 1dd2e8f942574e2be18374ebb81751082d8d467c ] This device does not function correctly in raw mode in kernel versions validating buffer sizes in bulk mode. It erroneously announces 16 bits per pixel instead of 12 for NV12 format, so it needs this quirk to fix computed frame size and avoid legitimate frames getting discarded. [Move info and div variables to local scope] Signed-off-by: Sergey Zakharchenko <szakharchenko@digital-loggers.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1dd2e8f942574e2be18374ebb81751082d8d467c ]

This device does not function correctly in raw mode in kernel
versions validating buffer sizes in bulk mode. It erroneously
announces 16 bits per pixel instead of 12 for NV12 format, so it
needs this quirk to fix computed frame size and avoid legitimate
frames getting discarded.

[Move info and div variables to local scope]

Signed-off-by: Sergey Zakharchenko <szakharchenko@digital-loggers.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: cx23885: Add support for AVerMedia CE310B 2020-02-24T07:38:14+00:00 Forest Crossman cyrozap@gmail.com 2019-11-16T22:38:40+00:00 c300e43e8bfd1912d3eb619a5c623b17c286aa07 [ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ] The AVerMedia CE310B is a simple composite + S-Video + stereo audio capture card, and uses only the CX23888 to perform all of these functions. I've tested both video inputs and the audio interface and confirmed that they're all working. However, there are some issues: * Sometimes when I switch inputs the video signal turns black and can't be recovered until the system is rebooted. I haven't been able to determine the cause of this behavior, nor have I found a solution to fix it or any workarounds other than rebooting. * The card sometimes seems to have trouble syncing to the video signal, and some of the VBI data appears as noise at the top of the frame, but I assume that to be a result of my very noisy RF environment and the card's unshielded input traces rather than a configuration issue. Signed-off-by: Forest Crossman <cyrozap@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ]

The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.

I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't
  be recovered until the system is rebooted. I haven't been able to
  determine the cause of this behavior, nor have I found a solution to
  fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
  and some of the VBI data appears as noise at the top of the frame, but
  I assume that to be a result of my very noisy RF environment and the
  card's unshielded input traces rather than a configuration issue.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run() 2020-02-24T07:38:04+00:00 Jia-Ju Bai baijiaju1990@gmail.com 2019-12-19T10:34:01+00:00 e6bc6f9b1a67514f4be4a44572397cf4e3a6153e [ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ] The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/media/platform/sti/bdisp/bdisp-hw.c, 385: msleep in bdisp_hw_reset drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341: bdisp_hw_reset in bdisp_device_run drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317: _raw_spin_lock_irqsave in bdisp_device_run To fix this bug, msleep() is replaced with udelay(). This bug is found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
    msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
    bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
    _raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: sun4i-csi: Fix [HV]sync polarity handling 2020-02-24T07:38:03+00:00 Chen-Yu Tsai wens@csie.org 2019-12-15T16:59:14+00:00 826ea5eedbd5093fb3a4036dc00c97a4862a5ce5 [ Upstream commit 1948dcf0f928b8bcdca57ca3fba8545ba380fc29 ] The Allwinner camera sensor interface has a different definition of [HV]sync. While the timing diagram uses the names HSYNC and VSYNC, the note following the diagram and register names use HREF and VREF. Combined they imply the hardware uses either [HV]REF or inverted [HV]SYNC. There are also registers to set horizontal skip lengths in pixels and vertical skip lengths in lines, also known as back porches. Fix the polarity handling by using the opposite polarity flag for the checks. Also rename `[hv]sync_pol` to `[hv]ref_pol` to better match the hardware register description. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1948dcf0f928b8bcdca57ca3fba8545ba380fc29 ]

The Allwinner camera sensor interface has a different definition of
[HV]sync. While the timing diagram uses the names HSYNC and VSYNC,
the note following the diagram and register names use HREF and VREF.
Combined they imply the hardware uses either [HV]REF or inverted
[HV]SYNC. There are also registers to set horizontal skip lengths
in pixels and vertical skip lengths in lines, also known as back
porches.

Fix the polarity handling by using the opposite polarity flag for
the checks. Also rename `[hv]sync_pol` to `[hv]ref_pol` to better
match the hardware register description.

Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: sun4i-csi: Fix data sampling polarity handling 2020-02-24T07:38:02+00:00 Chen-Yu Tsai wens@csie.org 2019-12-15T16:59:13+00:00 29e021f75114f4ba0af605d59ba2f03661b281aa [ Upstream commit cf9e6d5dbdd56ef2aa72f28c806711c4293c8848 ] The CLK_POL field specifies whether data is sampled on the falling or rising edge of PCLK, not whether the data lines are active high or low. Evidence of this can be found in the timing diagram labeled "horizontal size setting and pixel clock timing". Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING. While at it, reorder the three polarity flag checks so HSYNC and VSYNC are grouped together. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cf9e6d5dbdd56ef2aa72f28c806711c4293c8848 ]

The CLK_POL field specifies whether data is sampled on the falling or
rising edge of PCLK, not whether the data lines are active high or low.
Evidence of this can be found in the timing diagram labeled "horizontal
size setting and pixel clock timing".

Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING.
While at it, reorder the three polarity flag checks so HSYNC and VSYNC
are grouped together.

Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: sun4i-csi: Deal with DRAM offset 2020-02-24T07:38:02+00:00 Chen-Yu Tsai wens@csie.org 2019-12-15T16:59:15+00:00 a530c0153fcdebf5a0eb4f24f9e220b6026f1e0f [ Upstream commit 249b286171fa9c358e8d5c825b48c4ebea97c498 ] On Allwinner SoCs, some high memory bandwidth devices do DMA directly over the memory bus (called MBUS), instead of the system bus. These devices include the CSI camera sensor interface, video (codec) engine, display subsystem, etc.. The memory bus has a different addressing scheme without the DRAM starting offset. Deal with this using the "interconnects" property from the device tree, or if that is not available, set dev->dma_pfn_offset to PHYS_PFN_OFFSET. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 249b286171fa9c358e8d5c825b48c4ebea97c498 ]

On Allwinner SoCs, some high memory bandwidth devices do DMA directly
over the memory bus (called MBUS), instead of the system bus. These
devices include the CSI camera sensor interface, video (codec) engine,
display subsystem, etc.. The memory bus has a different addressing
scheme without the DRAM starting offset.

Deal with this using the "interconnects" property from the device tree,
or if that is not available, set dev->dma_pfn_offset to PHYS_PFN_OFFSET.

Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: i2c: mt9v032: fix enum mbus codes and frame sizes 2020-02-24T07:38:02+00:00 Eugen Hristev eugen.hristev@microchip.com 2019-11-21T07:55:24+00:00 0d654587c040542fa44af2aabaed221d97c20ba5 [ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ] This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032). [Sakari Ailus: rewrapped commit message] Suggested-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]

This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).

[Sakari Ailus: rewrapped commit message]

Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: ov5640: Fix check for PLL1 exceeding max allowed rate 2020-02-24T07:38:02+00:00 Adam Ford aford173@gmail.com 2019-10-29T12:42:11+00:00 d16175aa4b8002f33971144c1a9d6982846104c1 [ Upstream commit 2e3df204f9af42a47823ee955c08950373417420 ] The variable _rate is by ov5640_compute_sys_clk() which returns zero if the PLL exceeds 1GHz. Unfortunately, the check to see if the max PLL1 output is checking 'rate' and not '_rate' and 'rate' does not ever appear to be 0. This patch changes the check against the returned value of '_rate' to determine if the PLL1 output exceeds 1GHz. Fixes: aa2882481cad ("media: ov5640: Adjust the clock based on the expected rate") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2e3df204f9af42a47823ee955c08950373417420 ]

The variable _rate is by ov5640_compute_sys_clk() which returns
zero if the PLL exceeds 1GHz.  Unfortunately, the check to see
if the max PLL1 output is checking 'rate' and not '_rate' and
'rate' does not ever appear to be 0.

This patch changes the check against the returned value of
'_rate' to determine if the PLL1 output exceeds 1GHz.

Fixes: aa2882481cad ("media: ov5640: Adjust the clock based on the expected rate")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
media: i2c: adv748x: Fix unsafe macros 2020-02-14T21:53:05+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2019-10-22T13:25:22+00:00 1a0ef4aa6bc86b5a3d9bbf51d1abca5cab481f84 commit 0d962e061abcf1b9105f88fb850158b5887fbca3 upstream. Enclose multiple macro parameters in parentheses in order to make such macros safer and fix the Clang warning below: drivers/media/i2c/adv748x/adv748x-afe.c:452:12: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK, enable ? ctrl->val - 1 : 0); Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0d962e061abcf1b9105f88fb850158b5887fbca3 upstream.

Enclose multiple macro parameters in parentheses in order to
make such macros safer and fix the Clang warning below:

drivers/media/i2c/adv748x/adv748x-afe.c:452:12: warning: operator '?:'
has lower precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]

ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK, enable
? ctrl->val - 1 : 0);

Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: rc: ensure lirc is initialized before registering input device 2020-02-11T12:37:06+00:00 Sean Young sean@mess.org 2019-11-21T10:10:47+00:00 27d47ac960d4c94f40ce7682fd58a967b64bace0 commit 080d89f522e2baddb4fbbd1af4b67b5f92537ef8 upstream. Once rc_open is called on the input device, lirc events can be delivered. Ensure lirc is ready to do so else we might get this: Registered IR keymap rc-hauppauge rc rc0: Hauppauge WinTV PVR-350 as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0 input: Hauppauge WinTV PVR-350 as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0/input9 BUG: kernel NULL pointer dereference, address: 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.11-300.fc31.x86_64 #1 Hardware name: /DG43NB, BIOS NBG4310H.86A.0096.2009.0903.1845 09/03/2009 Workqueue: events ir_work [ir_kbd_i2c] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89 e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019 RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4 RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4 R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8 FS: 0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0 Call Trace: ir_do_keydown+0x8e/0x2b0 rc_keydown+0x52/0xc0 ir_work+0xb8/0x130 [ir_kbd_i2c] process_one_work+0x19d/0x340 worker_thread+0x50/0x3b0 kthread+0xfb/0x130 ? process_one_work+0x340/0x340 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 Modules linked in: rc_hauppauge tuner msp3400 saa7127 saa7115 ivtv(+) tveeprom cx2341x v4l2_common videodev mc i2c_algo_bit ir_kbd_i2c ip_tables firewire_ohci e1000e serio_raw firewire_core ata_generic crc_itu_t pata_acpi pata_jmicron fuse CR2: 0000000000000038 ---[ end trace c67c2697a99fa74b ]--- RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89 e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019 RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4 RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4 R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8 FS: 0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0 rc rc0: lirc_dev: driver ir_kbd_i2c registered at minor = 0, scancode receiver, no transmitter tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPG (1024 kB) ivtv0: Registered device vbi8 for decoder VBI (64 kB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1024 kB) Cc: stable@vger.kernel.org Tested-by: Nick French <nickfrench@gmail.com> Reported-by: Nick French <nickfrench@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 080d89f522e2baddb4fbbd1af4b67b5f92537ef8 upstream.

Once rc_open is called on the input device, lirc events can be delivered.
Ensure lirc is ready to do so else we might get this:

Registered IR keymap rc-hauppauge
rc rc0: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0
input: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0/input9
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.11-300.fc31.x86_64 #1
Hardware name:  /DG43NB, BIOS NBG4310H.86A.0096.2009.0903.1845 09/03/2009
Workqueue: events ir_work [ir_kbd_i2c]
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019
RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4
RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4
R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8
FS:  0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0
Call Trace:
ir_do_keydown+0x8e/0x2b0
rc_keydown+0x52/0xc0
ir_work+0xb8/0x130 [ir_kbd_i2c]
process_one_work+0x19d/0x340
worker_thread+0x50/0x3b0
kthread+0xfb/0x130
? process_one_work+0x340/0x340
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
Modules linked in: rc_hauppauge tuner msp3400 saa7127 saa7115 ivtv(+)
tveeprom cx2341x v4l2_common videodev mc i2c_algo_bit ir_kbd_i2c
ip_tables firewire_ohci e1000e serio_raw firewire_core ata_generic
crc_itu_t pata_acpi pata_jmicron fuse
CR2: 0000000000000038
---[ end trace c67c2697a99fa74b ]---
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019
RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4
RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4
R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8
FS:  0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0
rc rc0: lirc_dev: driver ir_kbd_i2c registered at minor = 0, scancode
receiver, no transmitter
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and
compatibles))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)

Cc: stable@vger.kernel.org
Tested-by: Nick French <nickfrench@gmail.com>
Reported-by: Nick French <nickfrench@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>