linux-stable.git/drivers/media, branch v5.4.2

media: mceusb: fix out of bounds read in MCE receiver buffer

2019-11-29T09:10:18+00:00

commit e43148645d18efc3072b1ba45afaa3f385299e55 upstream.

Fix multiple cases of out of bounds (OOB) read associated with
MCE device receive/input data handling.

In reference for the OOB cases below, the incoming/read (byte) data
format when the MCE device responds to a command is:
    { cmd_prefix, subcmd, data0, data1, ... }
where cmd_prefix are:
    MCE_CMD_PORT_SYS
    MCE_CMD_PORT_IR
and subcmd examples are:
    MCE_RSP_GETPORTSTATUS
    MCE_RSP_EQIRNUMPORTS
    ...
Response size dynamically depends on cmd_prefix and subcmd.
So data0, data1, ... may or may not be present on input.
Multiple responses may return in a single receiver buffer.

The trigger condition for OOB read is typically random or
corrupt input data that fills the mceusb receiver buffer.

Case 1:

mceusb_handle_command() reads data0 (var hi) and data1 (var lo)
regardless of whether the response includes such data.
If { cmd_prefix, subcmd } is at the end of the receiver buffer,
read past end of buffer occurs.

This case was reported by
KASAN: slab-out-of-bounds Read in mceusb_dev_recv
https://syzkaller.appspot.com/bug?extid=c7fdb6cb36e65f2fe8c9

Fix: In mceusb_handle_command(), change variable hi and lo to
pointers, and dereference only when required.

Case 2:

If response with data is truncated at end of buffer after
{ cmd_prefix, subcmd }, mceusb_handle_command() reads past
end of buffer for data0, data1, ...

Fix: In mceusb_process_ir_data(), check response size with
remaining buffer size before invoking mceusb_handle_command().
+    if (i + ir->rem < buf_len)
            mceusb_handle_command(ir, &ir->buf_in[i - 1]);

Case 3:

mceusb_handle_command() handles invalid/bad response such as
{ 0x??, MCE_RSP_GETPORTSTATUS } of length 2 as a response
{ MCE_CMD_PORT_SYS, MCE_RSP_GETPORTSTATUS, data0, ... }
of length 7. Read OOB occurs for non-existent data0, data1, ...
Cause is mceusb_handle_command() does not check cmd_prefix value.

Fix: mceusb_handle_command() must test both cmd_prefix and subcmd.

Case 4:

mceusb_process_ir_data() receiver parser state SUBCMD is
possible at start (i=0) of receiver buffer resulting in buffer
offset=-1 passed to mceusb_dev_printdata().
Bad offset results in OOB read before start of buffer.

[1214218.580308] mceusb 1-1.3:1.0: rx data[0]: 00 80 (length=2)
[1214218.580323] mceusb 1-1.3:1.0: Unknown command 0x00 0x80
...
[1214218.580406] mceusb 1-1.3:1.0: rx data[14]: 7f 7f (length=2)
[1214218.679311] mceusb 1-1.3:1.0: rx data[-1]: 80 90 (length=2)
[1214218.679325] mceusb 1-1.3:1.0: End of raw IR data
[1214218.679340] mceusb 1-1.3:1.0: rx data[1]: 7f 7f (length=2)

Fix: If parser_state is SUBCMD after processing receiver buffer,
reset parser_state to CMD_HEADER.
In effect, discard cmd_prefix at end of receiver buffer.
In mceusb_dev_printdata(), abort if buffer offset is out of bounds.

Case 5:

If response with data is truncated at end of buffer after
{ cmd_prefix, subcmd }, mceusb_dev_printdata() reads past
end of buffer for data0, data1, ...
while decoding the response to print out.

Fix: In mceusb_dev_printdata(), remove unneeded buffer offset
adjustments (var start and var skip) associated with MCE gen1 header.
Test for truncated MCE cmd response (compare offset+len with buf_len)
and skip decoding of incomplete response.
Move IR data tracing to execute before the truncation test.

Signed-off-by: A Sun 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imon: invalid dereference in imon_touch_event

2019-11-29T09:10:17+00:00

commit f3f5ba42c58d56d50f539854d8cc188944e96087 upstream.

The touch timer is set up in intf1. If the second interface does not exist,
the timer and touch input device are not setup and we get the following
error, when touch events are reported via intf0.

kernel BUG at kernel/time/timer.c:956!
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline]
RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline]
RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100
Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00
RSP: 0018:ffff8881db209930 EFLAGS: 00010006
RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583
RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200
RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb
R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000
R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006
FS:  0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 
 imon_touch_event drivers/media/rc/imon.c:1348 [inline]
 imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603
 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734
 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654
 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719
 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965
 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786
 __do_softirq+0x221/0x912 kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x178/0x1a0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 
RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581
Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c
RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x3b6/0x500 kernel/sched/idle.c:263
 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355
 start_kernel+0x82a/0x864 init/main.c:784
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
Modules linked in:

Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: cxusb: detect cxusb_ctrl_msg error in query

2019-11-29T09:10:16+00:00

commit ca8f245f284eeffa56f3b7a5eb6fc503159ee028 upstream.

Don't use uninitialized ircode[] in cxusb_rc_query() when
cxusb_ctrl_msg() fails to populate its contents.

syzbot reported:

dvb-usb: bulk message failed: -22 (1/-30591)
=====================================================
BUG: KMSAN: uninit-value in ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
BUG: KMSAN: uninit-value in rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
BUG: KMSAN: uninit-value in rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
CPU: 1 PID: 11436 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events dvb_usb_read_remote_control
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x191/0x1f0 lib/dump_stack.c:113
 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
 bsearch+0x1dd/0x250 lib/bsearch.c:41
 ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
 rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
 rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
 kthread+0x4b5/0x4f0 kernel/kthread.c:256
 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline]
 kmsan_internal_chain_origin+0xd2/0x170 mm/kmsan/kmsan.c:314
 __msan_chain_origin+0x6b/0xe0 mm/kmsan/kmsan_instr.c:184
 rc_g_keycode_from_table drivers/media/rc/rc-main.c:583 [inline]
 rc_keydown+0x2c4/0x6f0 drivers/media/rc/rc-main.c:816
 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
 kthread+0x4b5/0x4f0 kernel/kthread.c:256
 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Local variable description: ----ircode@cxusb_rc_query
Variable was created at:
 cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261

Signed-off-by: Vito Caputo 
Reported-by: syzbot 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: b2c2-flexcop-usb: add sanity checking

2019-11-29T09:10:16+00:00

commit 1b976fc6d684e3282914cdbe7a8d68fdce19095c upstream.

The driver needs an isochronous endpoint to be present. It will
oops in its absence. Add checking for it.

Reported-by: syzbot+d93dff37e6a89431c158@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: uvcvideo: Fix error path in control parsing failure

2019-11-29T09:10:15+00:00

commit 8c279e9394cade640ed86ec6c6645a0e7df5e0b6 upstream.

When parsing the UVC control descriptors fails, the error path tries to
cleanup a media device that hasn't been initialised, potentially
resulting in a crash. Fix this by initialising the media device before
the error handling path can be reached.

Fixes: 5a254d751e52 ("[media] uvcvideo: Register a v4l2_device")
Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: usbvision: Fix races among open, close, and disconnect

2019-11-29T09:10:06+00:00

commit 9e08117c9d4efc1e1bc6fce83dab856d9fd284b6 upstream.

Visual inspection of the usbvision driver shows that it suffers from
three races between its open, close, and disconnect handlers.  In
particular, the driver is careful to update its usbvision->user and
usbvision->remove_pending flags while holding the private mutex, but:

	usbvision_v4l2_close() and usbvision_radio_close() don't hold
	the mutex while they check the value of
	usbvision->remove_pending;

	usbvision_disconnect() doesn't hold the mutex while checking
	the value of usbvision->user; and

	also, usbvision_v4l2_open() and usbvision_radio_open() don't
	check whether the device has been unplugged before allowing
	the user to open the device files.

Each of these can potentially lead to usbvision_release() being called
twice and use-after-free errors.

This patch fixes the races by reading the flags while the mutex is
still held and checking for pending removes before allowing an open to
succeed.

Signed-off-by: Alan Stern 
CC: 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: usbvision: Fix invalid accesses after device disconnect

2019-11-29T09:10:05+00:00

commit c7a191464078262bf799136317c95824e26a222b upstream.

The syzbot fuzzer found two invalid-access bugs in the usbvision
driver.  These bugs occur when userspace keeps the device file open
after the device has been disconnected and usbvision_disconnect() has
set usbvision->dev to NULL:

	When the device file is closed, usbvision_radio_close() tries
	to issue a usb_set_interface() call, passing the NULL pointer
	as its first argument.

	If userspace performs a querycap ioctl call, vidioc_querycap()
	calls usb_make_path() with the same NULL pointer.

This patch fixes the problems by making the appropriate tests
beforehand.  Note that vidioc_querycap() is protected by
usbvision->v4l2_lock, acquired in a higher layer of the V4L2
subsystem.

Reported-and-tested-by: syzbot+7fa38a608b1075dfd634@syzkaller.appspotmail.com

Signed-off-by: Alan Stern 
CC: 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: vivid: Fix wrong locking that causes race conditions on streaming stop

2019-11-29T09:10:04+00:00

commit 6dcd5d7a7a29c1e4b8016a06aed78cd650cd8c27 upstream.

There is the same incorrect approach to locking implemented in
vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and
sdr_cap_stop_streaming().

These functions are called during streaming stopping with vivid_dev.mutex
locked. And they all do the same mistake while stopping their kthreads,
which need to lock this mutex as well. See the example from
vivid_stop_generating_vid_cap():
  /* shutdown control thread */
  vivid_grab_controls(dev, false);
  mutex_unlock(&dev->mutex);
  kthread_stop(dev->kthread_vid_cap);
  dev->kthread_vid_cap = NULL;
  mutex_lock(&dev->mutex);

But when this mutex is unlocked, another vb2_fop_read() can lock it
instead of vivid_thread_vid_cap() and manipulate the buffer queue.
That causes a use-after-free access later.

To fix those issues let's:
  1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(),
vivid_stop_generating_vid_out() and sdr_cap_stop_streaming();
  2. use mutex_trylock() with schedule_timeout_uninterruptible() in
the loops of the vivid kthread handlers.

Signed-off-by: Alexander Popov 
Acked-by: Linus Torvalds 
Tested-by: Hans Verkuil 
Signed-off-by: Hans Verkuil 
Cc:       # for v3.18 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: vivid: Set vid_cap_streaming and vid_out_streaming to true

2019-11-29T09:10:03+00:00

commit b4add02d2236fd5f568db141cfd8eb4290972eb3 upstream.

When vbi stream is started, followed by video streaming,
the vid_cap_streaming and vid_out_streaming were not being set to true,
which would cause the video stream to stop when vbi stream is stopped.
This patch allows to set vid_cap_streaming and vid_out_streaming to true.
According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)'
checks are a left-over from the original vivid development and should never
have been there.

Signed-off-by: Vandana BN 
Cc:       # for v3.18 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: stkwebcam: fix runtime PM after driver unbind

2019-10-04T12:38:46+00:00

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Note that runtime PM has never actually been enabled for this driver
since the support_autosuspend flag in its usb_driver struct is not set.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable 
Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman