linux-stable.git/drivers/media, branch v5.4.158

media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()

2021-11-06T12:59:45+00:00

commit 35d2969ea3c7d32aee78066b1f3cf61a0d935a4e upstream.

The bounds checking in avc_ca_pmt() is not strict enough.  It should
be checking "read_pos + 4" because it's reading 5 bytes.  If the
"es_info_length" is non-zero then it reads a 6th byte so there needs to
be an additional check for that.

I also added checks for the "write_pos".  I don't think these are
required because "read_pos" and "write_pos" are tied together so
checking one ought to be enough.  But they make the code easier to
understand for me.  The check on write_pos is:

	if (write_pos + 4 >= sizeof(c->operand) - 4) {

The first "+ 4" is because we're writing 5 bytes and the last " - 4"
is to leave space for the CRC.

The other problem is that "length" can be invalid.  It comes from
"data_length" in fdtv_ca_pmt().

Cc: stable@vger.kernel.org
Reported-by: Luo Likang 
Signed-off-by: Dan Carpenter 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: tegra-cec: Handle errors of clk_prepare_enable()

2021-09-22T10:26:31+00:00

[ Upstream commit 38367073c796a37a61549b1f66a71b3adb03802d ]

tegra_cec_probe() and tegra_cec_resume() ignored possible errors of
clk_prepare_enable(). The patch fixes this.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: TDA1997x: fix tda1997x_query_dv_timings() return value

2021-09-22T10:26:31+00:00

[ Upstream commit 7dee1030871a48d4f3c5a74227a4b4188463479a ]

Correctly propagate the tda1997x_detect_std error value.

Signed-off-by: Krzysztof Hałasa 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: v4l2-dv-timings.c: fix wrong condition in two for-loops

2021-09-22T10:26:31+00:00

[ Upstream commit 4108b3e6db31acc4c68133290bbcc87d4db905c9 ]

These for-loops should test against v4l2_dv_timings_presets[i].bt.width,
not if i < v4l2_dv_timings_presets[i].bt.width. Luckily nothing ever broke,
since the smallest width is still a lot higher than the total number of
presets, but it is wrong.

The last item in the presets array is all 0, so the for-loop must stop
when it reaches that sentinel.

Signed-off-by: Hans Verkuil 
Reported-by: Krzysztof Hałasa 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx258: Limit the max analogue gain to 480

2021-09-22T10:26:31+00:00

[ Upstream commit f809665ee75fff3f4ea8907f406a66d380aeb184 ]

The range for analog gain mentioned in the datasheet is [0, 480].
The real gain formula mentioned in the datasheet is:

	Gain = 512 / (512 – X)

Hence, values larger than 511 clearly makes no sense. The gain
register field is also documented to be of 9-bits in the datasheet.

Certainly, it is enough to infer that, the kernel driver currently
advertises an arbitrary analog gain max. Fix it by rectifying the
value as per the data sheet i.e. 480.

Signed-off-by: Umang Jain 
Reviewed-by: Laurent Pinchart 
Reviewed-by: Dave Stevenson 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx258: Rectify mismatch of VTS value

2021-09-22T10:26:31+00:00

[ Upstream commit 51f93add3669f1b1f540de1cf397815afbd4c756 ]

The frame_length_lines (0x0340) registers are hard-coded as follows:

- 4208x3118
  frame_length_lines = 0x0c50

- 2104x1560
  frame_length_lines = 0x0638

- 1048x780
  frame_length_lines = 0x034c

The driver exposes the V4L2_CID_VBLANK control in read-only mode and
sets its value to vts_def - height, where vts_def is a mode-dependent
value coming from the supported_modes array. It is set using one of
the following macros defined in the driver:

  #define IMX258_VTS_30FPS                0x0c98
  #define IMX258_VTS_30FPS_2K             0x0638
  #define IMX258_VTS_30FPS_VGA            0x034c

There's a clear mismatch in the value for the full resolution mode i.e.
IMX258_VTS_30FPS. Fix it by rectifying the macro with the value set for
the frame_length_lines register as stated above.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Umang Jain 
Reviewed-by: Bingbu Cao 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dib8000: rewrite the init prbs logic

2021-09-22T10:26:26+00:00

[ Upstream commit 8db11aebdb8f93f46a8513c22c9bd52fa23263aa ]

The logic at dib8000_get_init_prbs() has a few issues:

1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
   transmission mode is not 8K;
3. the array overflow validation is done by the callers.

Rewrite the code to fix such issues.

This should also shut up those smatch warnings:

	drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: rc-loopback: return number of emitters rather than error

2021-09-22T10:26:21+00:00

commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream.

The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: uvc: don't do DMA on stack

2021-09-22T10:26:21+00:00

commit 1a10d7fdb6d0e235e9d230916244cc2769d3f170 upstream.

As warned by smatch:
	drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
	drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)

those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.

So, use a kmalloc'ed buffer.

Cc: stable@vger.kernel.org	# Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: venus: venc: Fix potential null pointer dereference on pointer fmt

2021-09-15T07:47:33+00:00

[ Upstream commit 09ea9719a423fc675d40dd05407165e161ea0c48 ]

Currently the call to find_format can potentially return a NULL to
fmt and the nullpointer is later dereferenced on the assignment of
pixmp->num_planes = fmt->num_planes.  Fix this by adding a NULL pointer
check and returning NULL for the failure case.

Addresses-Coverity: ("Dereference null return")

Fixes: aaaa93eda64b ("[media] media: venus: venc: add video encoder files")
Signed-off-by: Colin Ian King 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin