linux-stable.git/drivers/media, branch v5.18.3

media: coda: Add more H264 levels for CODA960

2022-06-09T08:30:49+00:00

commit eb2fd187abc878a2dfad46902becb74963473c7d upstream.

Add H264 level 1.0, 4.1, 4.2 to the list of supported formats.
While the hardware does not fully support these levels, it does support
most of them. The constraints on frame size and pixel formats already
cover the limitation.

This fixes negotiation of level on GStreamer 1.17.1.

Cc: stable@vger.kernel.org
Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls")
Suggested-by: Philipp Zabel 
Signed-off-by: Nicolas Dufresne 
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Fabio Estevam 
Reviewed-by: Philipp Zabel 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: coda: Fix reported H264 profile

2022-06-09T08:30:49+00:00

commit 7110c08ea71953a7fc342f0b76046f72442cf26c upstream.

The CODA960 manual states that ASO/FMO features of baseline are not
supported, so for this reason this driver should only report
constrained baseline support.

This fixes negotiation issue with constrained baseline content
on GStreamer 1.17.1.

ASO/FMO features are unsupported for the encoder and untested for the
decoder because there is currently no userspace support. Neither GStreamer
parsers nor FFMPEG parsers support ASO/FMO.

Cc: stable@vger.kernel.org
Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls")
Signed-off-by: Nicolas Dufresne 
Signed-off-by: Ezequiel Garcia 
Tested-by: Pascal Speck 
Signed-off-by: Fabio Estevam 
Reviewed-by: Philipp Zabel 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()

2022-06-09T08:30:15+00:00

[ Upstream commit a6dd5265c21c28d0a782befe41a97c347e78f22f ]

IS_ERR() and PTR_ERR() use wrong pointer, it should be
sensor->dovdd, fix it.

Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: i2c: ov2640: Depend on V4L2_ASYNC

2022-06-09T08:30:15+00:00

[ Upstream commit 8429b358975f11574f747ca8ef20d524d8247682 ]

Add V4L2_ASYNC as a dependency to match other drivers and prevent failures
when compile testing.

Fixes: ff3cc65cadb5 ("media: v4l: async, fwnode: Improve module organisation")
Signed-off-by: Mike Pagano 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: ov7670: remove ov7670_power_off from ov7670_remove

2022-06-09T08:30:15+00:00

[ Upstream commit 5bf19572e31375368f19edd2dbb2e0789518bb99 ]

In ov7670_probe, it always invokes ov7670_power_off() no matter
the execution is successful or failed. So we cannot invoke it
agiain in ov7670_remove().

Fix this by removing ov7670_power_off from ov7670_remove.

Fixes: 030f9f682e66 ("media: ov7670: control clock along with power")
Signed-off-by: Dongliang Mu 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mediatek: vcodec: Fix v4l2 compliance decoder cmd test fail

2022-06-09T08:30:13+00:00

[ Upstream commit 08a83828825cbf3bc2c9f582a4cd4da9f40c77d6 ]

Will return -EINVAL using standard framework api when test stateless
decoder with cmd VIDIOC_(TRY)DECODER_CMD. Disable them to adjust v4l2
compliance test for user driver(GStreamer/Chrome) won't use decoder cmd.

Fixes: 8cdc3794b2e3 ("media: mtk-vcodec: vdec: support stateless API")
Signed-off-by: Yunfei Dong 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check

2022-06-09T08:30:12+00:00

[ Upstream commit 91f49b80983f7bffdea9498209b2b896231ac776 ]

While this does not happen in production, this check should be done
versus the mask, as checking with the YCYC value may not include
some bits that may be set.
It is correct and safe to check the whole mask.

Fixes: 123aaf816b95 ("media: atmel: atmel-sama5d2-isc: fix YUYV format")
Signed-off-by: Eugen Hristev 
Reviewed-by: Jacopo Mondi 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: vsp1: Fix offset calculation for plane cropping

2022-06-09T08:30:12+00:00

[ Upstream commit 5f25abec8f21b7527c1223a354d23c270befddb3 ]

The vertical subsampling factor is currently not considered in the
offset calculation for plane cropping done in rpf_configure_partition.
This causes a distortion (shift of the color plane) when formats with
the vsub factor larger than 1 are used (e.g. NV12, see
vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor
for all planes except plane 0 (luminance).

Drop generalization of the offset calculation to reduce the binary size.

Fixes: e5ad37b64de9 ("[media] v4l: vsp1: Add cropping support")
Signed-off-by: Michael Rodin 
Signed-off-by: LUU HOAI 
Signed-off-by: Laurent Pinchart 
Reviewed-by: Kieran Bingham 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: make RADIO_ADAPTERS tristate

2022-06-09T08:30:12+00:00

[ Upstream commit 215d49a41709610b9e82a49b27269cfaff1ef0b6 ]

Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m.

The build errors occur due to [in drivers/media/Makefile]:
obj-$(CONFIG_VIDEO_DEV) += radio/
so the (would be) builtin tea575x.o is not being built.

This is also due to drivers/media/radio/Kconfig declaring a bool
Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV),
so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers
that depend on RADIO_ADPATERS can be configured as builtin (=y) or
as loadable modules (=m).

Fix this by converting RADIO_ADAPTERS to a tristate symbol instead
of a bool symbol.

Fixes these build errors:

ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined!

Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com

Fixes: 9958d30f38b9 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init

2022-06-09T08:30:12+00:00

[ Upstream commit 471bec68457aaf981add77b4f590d65dd7da1059 ]

Syzbot reported that -1 is used as array index. The problem was in
missing validation check.

hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.

hdw->workpoll initialization moved upper to prevent warning in
__flush_work.

Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com

Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin