linux-stable.git/drivers/media, branch v5.0.12

media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration

2019-04-05T20:34:50+00:00

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")

Signed-off-by: Pawe? Chmiel 
Reviewed-by: Jacek Anaszewski 
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: rcar-vin: Allow independent VIN link enablement

2019-04-05T20:34:50+00:00

[ Upstream commit c5ff0edb8e2270a75935c73217fb0de1abd2d910 ]

There is a block of code in rvin_group_link_notify() that prevents
enabling a link to a VIN node if any entity in the media graph is
in use. This prevents enabling a VIN link even if there is an in-use
entity somewhere in the graph that is independent of the link's
pipeline.

For example, the code block will prevent enabling a link from
the first rcar-csi2 receiver to a VIN node even if there is an
enabled link somewhere far upstream on the second independent
rcar-csi2 receiver pipeline.

If this code block is meant to prevent modifying a link if any entity
in the graph is actively involved in streaming (because modifying
the CHSEL register fields can disrupt any/all running streams), then
the entities stream counts should be checked rather than the use counts.

(There is already such a check in __media_entity_setup_link() that verifies
the stream_count of the link's source and sink entities are both zero,
but that is insufficient, since there should be no running streams in
the entire graph).

Modify the code block to check the entity stream_count instead of the
use_count (and elaborate on the comment). VIN node links can now be
enabled even if there are other independent in-use entities that are
not streaming.

Fixes: c0cc5aef31 ("media: rcar-vin: add link notify for Gen3")

Signed-off-by: Steve Longerbeam 
Reviewed-by: Niklas Söderlund 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mt9m111: set initial frame size other than 0x0

2019-04-05T20:34:48+00:00

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz 
Cc: Michael Grzeschik 
Cc: Marco Felsch 
Signed-off-by: Akinobu Mita 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mtk-jpeg: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:35+00:00

[ Upstream commit 1b275e4e8b70dbff9850874b30831c1bd8d3c504 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mx2_emmaprp: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:35+00:00

[ Upstream commit 8d20dcefe471763f23ad538369ec65b51993ffff ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: s5p-g2d: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:35+00:00

[ Upstream commit 30fa627b32230737bc3f678067e2adfecf956987 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: rockchip/rga: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:35+00:00

[ Upstream commit da2d3a4e4adabc6ccfb100bc9abd58ee9cd6c4b7 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: s5p-jpeg: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:34+00:00

[ Upstream commit 4a88f89885c7cf65c62793f385261a6e3315178a ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: sh_veu: Correct return type for mem2mem buffer helpers

2019-04-05T20:34:34+00:00

[ Upstream commit 43c145195c7fc3025ee7ecfc67112ac1c82af7c2 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

 v4l2_m2m_next_buf
 v4l2_m2m_last_buf
 v4l2_m2m_buf_remove
 v4l2_m2m_next_src_buf
 v4l2_m2m_next_dst_buf
 v4l2_m2m_last_src_buf
 v4l2_m2m_last_dst_buf
 v4l2_m2m_src_buf_remove
 v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: ov7740: fix runtime pm initialization

2019-04-05T20:34:34+00:00

[ Upstream commit 12aceee1f412c3ddc7750155fec06c906f14ab51 ]

The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(),
and this makes this device's runtime PM usage count a negative value.

The ov7740_set_ctrl() tries to do something only if the device's runtime
PM usage counter is nonzero.

ov7740_set_ctrl()
{
	if (!pm_runtime_get_if_in_use(&client->dev))
		return 0;

	;

	pm_runtime_put(&client->dev);

	return ret;
}

However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup()
while the runtime PM of this device is not yet enabled.  In this case,
the pm_runtime_get_if_in_use() returns -EINVAL (!= 0).

Therefore we can't bail out of this function and the usage count is
decreased by pm_runtime_put() without increment.

This fixes this problem by enabling the runtime PM of this device before
v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called
when the runtime PM is enabled.

Cc: Wenyou Yang 
Signed-off-by: Akinobu Mita 
Tested-by: Eugen Hristev 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin