linux-stable.git/drivers/media, branch v4.9.9 Linux kernel stable tree s5k4ecgx: select CRC32 helper 2017-02-01T07:33:12+00:00 Arnd Bergmann arnd@arndb.de 2016-12-09T11:41:29+00:00 668a827a6c9daa88efb4464144a6bd7b2146c66c commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream. A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream.

A rare randconfig build failure shows up in this driver when
the CRC32 helper is not there:

drivers/media/built-in.o: In function `s5k4ecgx_s_power':
s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le'

This adds the 'select' that all other users of this function have.

Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v4l: tvp5150: Don't override output pinmuxing at stream on/off time 2017-02-01T07:33:10+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2016-12-09T11:47:19+00:00 1b8ff91ae545d36337de459c7195f6f369dc776d commit 79d6205a3f741c9fb89cfc47dfa0eddb1526726d upstream. The s_stream() handler incorrectly writes the whole MISC_CTL register to enable or disable the outputs, overriding the output pinmuxing configuration. Fix it to only touch the output enable bits. The CONF_SHARED_PIN register is also written by the same function, resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this is obviously incorrect, and breaks operation on other devices. Fix it by removing the write. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 79d6205a3f741c9fb89cfc47dfa0eddb1526726d upstream.

The s_stream() handler incorrectly writes the whole MISC_CTL register to
enable or disable the outputs, overriding the output pinmuxing
configuration. Fix it to only touch the output enable bits.

The CONF_SHARED_PIN register is also written by the same function,
resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on
the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this
is obviously incorrect, and breaks operation on other devices. Fix it by
removing the write.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v4l: tvp5150: Fix comment regarding output pin muxing 2017-02-01T07:33:10+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2016-12-09T11:47:18+00:00 11e5015ae1d12473f12baa1e8cc66849be019c3a commit b4b2de386bbb6589d81596999d4a924928dc119b upstream. The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently depending on whether the input is an S-Video or composite signal. The comment that explains the logic doesn't reflect the code. It appears that the comment is incorrect, as disabling the output data bus in composite mode makes no sense. Update the comment to match the code. While at it define macros for the MISC_CTL register bits, the code is too confusing with numerical values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b4b2de386bbb6589d81596999d4a924928dc119b upstream.

The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently
depending on whether the input is an S-Video or composite signal. The
comment that explains the logic doesn't reflect the code. It appears
that the comment is incorrect, as disabling the output data bus in
composite mode makes no sense. Update the comment to match the code.

While at it define macros for the MISC_CTL register bits, the code is
too confusing with numerical values.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v4l: tvp5150: Reset device at probe time, not in get/set format handlers 2017-02-01T07:33:10+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2016-12-09T11:47:17+00:00 d25f9bfeb62f812e8aa7eded53df8155bff25ee5 commit aff808e813fc2d311137754165cf53d4ee6ddcc2 upstream. The tvp5150 doesn't support format setting through the subdev pad API and thus implements the set format handler as a get format operation. The single handler, tvp5150_fill_fmt(), resets the device by calling tvp5150_reset(). This causes malfunction as the device can be reset at will, possibly from userspace when the subdev userspace API is enabled. The reset call was added in commit ec2c4f3f93cb ("[media] media: tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the device to a known state before detecting the current TV standard. However, the get format handler doesn't access the hardware to get the TV standard since commit 963ddc63e20d ("[media] media: tvp5150: Add cropping support"). There is thus no need to reset the device when getting the format. However, removing the tvp5150_reset() from the get/set format handlers results in the function not being called at all if the bridge driver doesn't use the .reset() operation. The operation is nowadays abused and shouldn't be used, so shouldn't expect bridge drivers to call it. To make sure the device is properly initialize, move the reset call from the format handlers to the probe function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aff808e813fc2d311137754165cf53d4ee6ddcc2 upstream.

The tvp5150 doesn't support format setting through the subdev pad API
and thus implements the set format handler as a get format operation.
The single handler, tvp5150_fill_fmt(), resets the device by calling
tvp5150_reset(). This causes malfunction as the device can be reset at
will, possibly from userspace when the subdev userspace API is enabled.

The reset call was added in commit ec2c4f3f93cb ("[media] media:
tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the
device to a known state before detecting the current TV standard.
However, the get format handler doesn't access the hardware to get the
TV standard since commit 963ddc63e20d ("[media] media: tvp5150: Add
cropping support"). There is thus no need to reset the device when
getting the format.

However, removing the tvp5150_reset() from the get/set format handlers
results in the function not being called at all if the bridge driver
doesn't use the .reset() operation. The operation is nowadays abused and
shouldn't be used, so shouldn't expect bridge drivers to call it. To
make sure the device is properly initialize, move the reset call from
the format handlers to the probe function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pctv452e: move buffer to heap, no mutex 2017-02-01T07:33:10+00:00 Max Kellermann max.kellermann@gmail.com 2016-12-15T21:51:07+00:00 fe6531075e1dd8a7784bf0450186be1380eafb86 commit 48775cb73c2e26b7ca9d679875a6e570c8b8e124 upstream. commit 73d5c5c864f4 ("[media] pctv452e: don't do DMA on stack") caused a NULL pointer dereference which occurs when dvb_usb_init() calls dvb_usb_device_power_ctrl() for the first time, before the frontend has been attached. It also caused a recursive deadlock because tt3650_ci_msg_locked() has already locked the mutex. So, partially revert it, but move the buffer to the heap (DMA capable), not to the stack (may not be DMA capable). Instead of sharing one buffer which needs mutex protection, do a new heap allocation for each call. Fixes: commit 73d5c5c864f4 ("[media] pctv452e: don't do DMA on stack") Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 48775cb73c2e26b7ca9d679875a6e570c8b8e124 upstream.

commit 73d5c5c864f4 ("[media] pctv452e: don't do DMA on stack") caused
a NULL pointer dereference which occurs when dvb_usb_init()
calls dvb_usb_device_power_ctrl() for the first time, before the
frontend has been attached. It also caused a recursive deadlock because
tt3650_ci_msg_locked() has already locked the mutex.

So, partially revert it, but move the buffer to the heap
(DMA capable), not to the stack (may not be DMA capable).
Instead of sharing one buffer which needs mutex protection,
do a new heap allocation for each call.

Fixes: commit 73d5c5c864f4 ("[media] pctv452e: don't do DMA on stack")

Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s5p-mfc: Fix clock management in s5p_mfc_release() function 2017-01-26T07:24:45+00:00 Marek Szyprowski m.szyprowski@samsung.com 2016-11-14T14:09:26+00:00 3bef7578e05f8188743641da8bc7ddfdbb64d268 commit c0026c7bfb95c250c3e34fde59f96ad72fd730d6 upstream. Clock control indirectly requires access to MFC device, so call it only if we are sure that the device exists in s5p_mfc_release function. s5p_mfc_remove() calls s5p_mfc_final_pm(), which releases all PM related resources, including clocks, so any call to clocks related functions is not valid after s5p_mfc_final_pm(). Fixes: d695c12 ("[media] media: s5p-mfc fix invalid memory access from s5p_mfc_release()") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c0026c7bfb95c250c3e34fde59f96ad72fd730d6 upstream.

Clock control indirectly requires access to MFC device, so call it only
if we are sure that the device exists in s5p_mfc_release function.
s5p_mfc_remove() calls s5p_mfc_final_pm(), which releases all PM related
resources, including clocks, so any call to clocks related functions
is not valid after s5p_mfc_final_pm().

Fixes: d695c12 ("[media] media: s5p-mfc fix invalid memory access from
s5p_mfc_release()")

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
st-hva: fix some error handling in hva_hw_probe() 2017-01-26T07:24:45+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-10-14T07:32:24+00:00 dfe8e5730fa1a91129c65dacf85783fa796d7e0a commit 6b2bed891253c08e7f4c17dbd46b71fc87f22eef upstream. The devm_ioremap_resource() returns error pointers, never NULL. The platform_get_resource() returns NULL on error, never error pointers. The error code needs to be set, as well. The current code returns PTR_ERR(NULL) which is success. Fixes: 57b2c0628b60 ("[media] st-hva: multi-format video encoder V4L2 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b2bed891253c08e7f4c17dbd46b71fc87f22eef upstream.

The devm_ioremap_resource() returns error pointers, never NULL.  The
platform_get_resource() returns NULL on error, never error pointers.
The error code needs to be set, as well.  The current code returns
PTR_ERR(NULL) which is success.

Fixes: 57b2c0628b60 ("[media] st-hva: multi-format video encoder V4L2 driver")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ite-cir: initialize use_demodulator before using it 2017-01-26T07:24:45+00:00 Nicolas Iooss nicolas.iooss_linux@m4x.org 2016-09-10T16:59:49+00:00 b9dc16170dbf5385a273019175c0576d3224cd36 commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream. Function ite_set_carrier_params() uses variable use_demodulator after having initialized it to false in some if branches, but this variable is never set to true otherwise. This bug has been found using clang -Wsometimes-uninitialized warning flag. Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for several ITE CIRs") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream.

Function ite_set_carrier_params() uses variable use_demodulator after
having initialized it to false in some if branches, but this variable is
never set to true otherwise.

This bug has been found using clang -Wsometimes-uninitialized warning
flag.

Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for
several ITE CIRs")

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gs1662: drop kfree for memory allocated with devm_kzalloc 2017-01-26T07:24:45+00:00 Wei Yongjun weiyongjun1@huawei.com 2016-09-21T13:09:39+00:00 278997a8e002ba1cedf132e86b12acf00137c28a commit df94121f02ecce435d6b5277071eb94b764caa89 upstream. It's not necessary to free memory allocated with devm_kzalloc and using kfree leads to a double free. Fixes: 7aae6e2df127 ("[media] Add GS1662 driver, a video serializer") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit df94121f02ecce435d6b5277071eb94b764caa89 upstream.

It's not necessary to free memory allocated with devm_kzalloc
and using kfree leads to a double free.

Fixes: 7aae6e2df127 ("[media] Add GS1662 driver, a video serializer")

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform: pxa_camera: add VIDEO_V4L2 dependency 2017-01-26T07:24:45+00:00 Arnd Bergmann arnd@arndb.de 2016-09-19T12:46:30+00:00 cec5ef6ac5202c79d0a95e65d41511a770e8607b commit ff681022c6639c194fbb6893c50ace9e52a44788 upstream. Moving the pxa_camera driver from soc_camera lots the implied VIDEO_V4L2 Kconfig dependency, and building the driver without V4L2 results in a kernel that cannot link: drivers/media/platform/pxa_camera.o: In function `pxa_camera_remove': pxa_camera.c:(.text.pxa_camera_remove+0x10): undefined reference to `v4l2_clk_unregister' pxa_camera.c:(.text.pxa_camera_remove+0x18): undefined reference to `v4l2_device_unregister' drivers/media/platform/pxa_camera.o: In function `pxa_camera_probe': pxa_camera.c:(.text.pxa_camera_probe+0x458): undefined reference to `v4l2_of_parse_endpoint' drivers/media/v4l2-core/videobuf2-core.o: In function `__enqueue_in_driver': drivers/media/v4l2-core/videobuf2-core.o: In function `vb2_core_streamon': videobuf2-core.c:(.text.vb2_core_streamon+0x1b4): undefined reference to `v4l_vb2q_enable_media_source' drivers/media/v4l2-core/videobuf2-v4l2.o: In function `vb2_ioctl_reqbufs': videobuf2-v4l2.c:(.text.vb2_ioctl_reqbufs+0xc): undefined reference to `video_devdata' This adds back an explicit dependency. Fixes: 3050b9985024 ("[media] media: platform: pxa_camera: move pxa_camera out of soc_camera") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff681022c6639c194fbb6893c50ace9e52a44788 upstream.

Moving the pxa_camera driver from soc_camera lots the implied
VIDEO_V4L2 Kconfig dependency, and building the driver without
V4L2 results in a kernel that cannot link:

drivers/media/platform/pxa_camera.o: In function `pxa_camera_remove':
pxa_camera.c:(.text.pxa_camera_remove+0x10): undefined reference to `v4l2_clk_unregister'
pxa_camera.c:(.text.pxa_camera_remove+0x18): undefined reference to `v4l2_device_unregister'
drivers/media/platform/pxa_camera.o: In function `pxa_camera_probe':
pxa_camera.c:(.text.pxa_camera_probe+0x458): undefined reference to `v4l2_of_parse_endpoint'
drivers/media/v4l2-core/videobuf2-core.o: In function `__enqueue_in_driver':
drivers/media/v4l2-core/videobuf2-core.o: In function `vb2_core_streamon':
videobuf2-core.c:(.text.vb2_core_streamon+0x1b4): undefined reference to `v4l_vb2q_enable_media_source'
drivers/media/v4l2-core/videobuf2-v4l2.o: In function `vb2_ioctl_reqbufs':
videobuf2-v4l2.c:(.text.vb2_ioctl_reqbufs+0xc): undefined reference to `video_devdata'

This adds back an explicit dependency.

Fixes: 3050b9985024 ("[media] media: platform: pxa_camera: move pxa_camera out of soc_camera")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>