linux-stable.git/drivers/media, branch v4.4.95

ttpci: address stringop overflow warning

2017-10-08T08:14:20+00:00

commit 69d3973af1acd4c0989ec8218c05f12d303cd7cf upstream.

gcc-7.0.1 warns about old code in ttpci:

In file included from drivers/media/pci/ttpci/av7110.c:63:0:
In function 'irdebi.isra.2',
    inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3,
    inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:659:3:
drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
   memcpy(av7110->debi_virt, (char *) &res, count);
In function 'irdebi.isra.2',
    inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3,
    inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:668:3:
drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
   memcpy(av7110->debi_virt, (char *) &res, count);

Apparently, 'count' can be negative here, which will then get turned
into a giant size argument for memcpy. Changing the sizes to 'unsigned
int' instead seems safe as we already check for maximum sizes, and it
also simplifies the code a bit.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

exynos-gsc: Do not swap cb/cr for semi planar formats

2017-10-08T08:14:19+00:00

[ Upstream commit d7f3e33df4fbdc9855fb151f4a328ec46447e3ba ]

In the case of semi planar formats cb and cr are in the same plane
in memory, meaning that will be set to 'cb' whatever the format is,
and whatever the (packed) order of those components are.

Suggested-by: Nicolas Dufresne 
Signed-off-by: Thibault Saunier 
Signed-off-by: Javier Martinez Canillas 
Acked-by: Sylwester Nawrocki 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: uvcvideo: Prevent heap overflow when accessing mapped controls

2017-09-27T09:00:16+00:00

commit 7e09f7d5c790278ab98e5f2c22307ebe8ad6e8ba upstream.

The size of uvc_control_mapping is user controlled leading to a
potential heap overflow in the uvc driver. This adds a check to verify
the user provided size fits within the bounds of the defined buffer
size.

Originally-from: Richard Simmons 

Signed-off-by: Guenter Roeck 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: v4l2-compat-ioctl32: Fix timespec conversion

2017-09-27T09:00:16+00:00

commit 9c7ba1d7634cef490b85bc64c4091ff004821bfd upstream.

Certain syscalls like recvmmsg support 64 bit timespec values for the
X32 ABI. The helper function compat_put_timespec converts a timespec
value to a 32 bit or 64 bit value depending on what ABI is used. The
v4l2 compat layer, however, is not designed to support 64 bit timespec
values and always uses 32 bit values. Hence, compat_put_timespec must
not be used.

Without this patch, user space will be provided with bad timestamp
values from the VIDIOC_DQEVENT ioctl. Also, fields of the struct
v4l2_event32 that come immediately after timestamp get overwritten,
namely the field named id.

Fixes: 81993e81a994 ("compat: Get rid of (get|put)_compat_time(val|spec)")
Cc: H. Peter Anvin 
Cc: Laurent Pinchart 
Cc: Tiffany Lin 
Cc: Ricardo Ribalda Delgado 
Cc: Sakari Ailus 
Signed-off-by: Daniel Mentz 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

saa7164: fix double fetch PCIe access condition

2017-08-11T16:08:51+00:00

commit 6fb05e0dd32e566facb96ea61a48c7488daa5ac3 upstream.

Avoid a double fetch by reusing the values from the prior transfer.

Originally reported via https://bugzilla.kernel.org/show_bug.cgi?id=195559

Thanks to Pengfei Wang  for reporting.

Signed-off-by: Steven Toth 
Reported-by: Pengfei Wang 
Signed-off-by: Mauro Carvalho Chehab 
Cc: Eduardo Valentin 
Signed-off-by: Greg Kroah-Hartman

media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds

2017-08-11T16:08:50+00:00

commit 9f5039ba440e499d85c29b1ddbc3cbc9dc90e44b upstream.

Since commit e8f4818895b3 ("[media] lirc: advertise
LIRC_CAN_GET_REC_RESOLUTION and improve") lircd uses the ioctl
LIRC_GET_REC_RESOLUTION to determine the shortest pulse or space that
the hardware can detect. This breaks decoding in lirc because lircd
expects the answer in microseconds, but nanoseconds is returned.

Reported-by: Derek 
Tested-by: Derek 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl

2017-08-11T16:08:48+00:00

commit da05d52d2f0f6bd61094a0cd045fed94bf7d673a upstream.

this patch makes sure VPFE_CMD_S_CCDC_RAW_PARAMS ioctl no longer works
for vpfe_capture driver with a minimal patch suitable for backporting.

- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
  numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
  described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
  the user input over the kernel settings, and then compare them
  for inequality.
- We then go on to use an address provided by user space as both the
  __user pointer for input and pass it through phys_to_virt to come up
  with a kernel pointer to copy the data to. This looks like a trivially
  exploitable root hole.

Due to these reasons we make sure this ioctl now returns -EINVAL and backport
this patch as far as possible.

Fixes: 5f15fbb68fd7 ("V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver")

Signed-off-by: Lad, Prabhakar 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

v4l: s5c73m3: fix negation operator

2017-08-07T02:19:42+00:00

commit a2370ba2752538404e363346b339869c9973aeac upstream.

Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.

Reported-by: David Binderman 
Signed-off-by: Andrzej Hajda 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

cx88: Fix regression in initial video standard setting

2017-07-27T22:06:06+00:00

commit 4e0973a918b9a42e217093f078e04a61e5dd95a5 upstream.

Setting initial standard at the top of cx8800_initdev would cause the
first call to cx88_set_tvnorm() to return without programming any
registers (leaving the driver saying it's set to NTSC but the hardware
isn't programmed).  Even worse, any subsequent attempt to explicitly
set it to NTSC-M will return success but actually fail to program the
underlying registers unless first changing the standard to something
other than NTSC-M.

Set the initial standard later in the process, and make sure the field
is zero at the beginning to ensure that the call always goes through.

This regression was introduced in the following commit:

commit ccd6f1d488e7 ("[media] cx88: move width, height and field to core
struct")

Author: Hans Verkuil 

[media] cx88: move width, height and field to core struct

Signed-off-by: Devin Heitmueller 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

s5p-jpeg: don't return a random width/height

2017-07-27T22:06:02+00:00

commit a16e37726c444cbda91e73ed5f742e717bfe866f upstream.

Gcc 7.1 complains about:

drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9':
drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized]
  result->w = width;
  ~~~~~~~~~~^~~~~~~
drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized]
  result->h = height;
  ~~~~~~~~~~^~~~~~~~

Indeed the code would allow it to return a random value (although
it shouldn't happen, in practice). So, explicitly set both to zero,
just in case.

Acked-by: Andrzej Pietrasiewicz 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman