linux-stable.git/drivers/media, branch v4.4.53

media: fix dm1105.c build error

2017-03-12T05:37:24+00:00

commit e3bb3cddd177550d63a3e4909cf1a7782f13414d upstream.

Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.

drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'

Signed-off-by: Randy Dunlap 
Reported-by: kbuild test robot 
Cc: Javier Martinez Canillas 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

uvcvideo: Fix a wrong macro

2017-03-12T05:37:24+00:00

commit 17c341ec0115837a610b2da15e32546e26068234 upstream.

Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.

Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

am437x-vpfe: always assign bpp variable

2017-03-12T05:37:24+00:00

commit 6ebf75774f823ddbdbd10921006989d4df222f4a upstream.

In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")

Signed-off-by: Nicolas Iooss 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

siano: make it work again with CONFIG_VMAP_STACK

2017-02-23T16:43:09+00:00

commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream.

Reported as a Kaffeine bug:
	https://bugs.kde.org/show_bug.cgi?id=375811

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.

Tested with USB ID 2040:5510: Hauppauge Windham

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

s5k4ecgx: select CRC32 helper

2017-02-01T07:30:53+00:00

commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream.

A rare randconfig build failure shows up in this driver when
the CRC32 helper is not there:

drivers/media/built-in.o: In function `s5k4ecgx_s_power':
s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le'

This adds the 'select' that all other users of this function have.

Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")

Signed-off-by: Arnd Bergmann 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

ite-cir: initialize use_demodulator before using it

2017-01-26T07:23:50+00:00

commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream.

Function ite_set_carrier_params() uses variable use_demodulator after
having initialized it to false in some if branches, but this variable is
never set to true otherwise.

This bug has been found using clang -Wsometimes-uninitialized warning
flag.

Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for
several ITE CIRs")

Signed-off-by: Nicolas Iooss 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

blackfin: check devm_pinctrl_get() for errors

2017-01-26T07:23:49+00:00

commit c9205e18b41a6ef5ad73e1c4b86a78b2ea3ccb9b upstream.

devm_pinctrl_get() can fail so we should check for that.

Fixes: 0a6824bc10de ('[media] v4l2: blackfin: select proper pinctrl state in ppi_set_params if CONFIG_PINCTRL is enabled')

Signed-off-by: Dan Carpenter 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

cx23885-dvb: move initialization of a8293_pdata

2017-01-12T10:22:51+00:00

commit f0b0faff78c2c2e8efe843de55405a1f0470b8c4 upstream.

Smatch complains about where the au8293_data is placed:

drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code).

It is not actually expected to have such initialization at

switch {
	foo = bar;

	case:
...
}

Not really sure how gcc does that, but this is something that I would
expect that different compilers would do different things.

David Howells checked with the compiler people: it's not really expected to
initialise as expected.

So, move the initialization outside the switch(), making smatch to
shut up one warning.

Acked-by: David Howells 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: solo6x10: fix lockup by avoiding delayed register write

2017-01-09T07:07:51+00:00

commit 5fc4b067ec082c3127e0156f800769b7e0dce078 upstream.

This fixes a lockup at device probing which happens on some solo6010
hardware samples. This is a regression introduced by commit e1ceb25a1569
("[media] SOLO6x10: remove unneeded register locking and barriers")

The observed lockup happens in solo_set_motion_threshold() called from
solo_motion_config().

This extra "flushing" is not fundamentally needed for every write, but
apparently the code in driver assumes such behaviour at last in some
places.

Actual fix was proposed by Hans Verkuil.

Fixes: e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers")

Signed-off-by: Andrey Utkin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

dib0700: fix nec repeat handling

2016-11-18T09:48:34+00:00

commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream.

When receiving a nec repeat, ensure the correct scancode is repeated
rather than a random value from the stack.  This removes the need for
the bogus uninitialized_var() and also fixes the warnings:

    drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’:
    drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function

[sean addon: So after writing the patch and submitting it, I've bought the
             hardware on ebay. Without this patch you get random scancodes
             on nec repeats, which the patch indeed fixes.]

Signed-off-by: Sean Young 
Tested-by: Sean Young 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman