linux-stable.git/drivers/media, branch v4.4.263

media: hdpvr: Fix an error handling path in hdpvr_probe()

2021-03-17T15:07:23+00:00

commit c0f71bbb810237a38734607ca4599632f7f5d47f upstream.

Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.

Signed-off-by: Arvind Yadav 
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
[krzk: backport to v4.4, still using single thread workqueue which
       is drained/destroyed now in proper step so it cannot be NULL]
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

media: usbtv: Fix deadlock on suspend

2021-03-17T15:07:20+00:00

commit 8a7e27fd5cd696ba564a3f62cedef7269cfd0723 upstream.

usbtv doesn't support power management, so on system suspend the
.disconnect callback of the driver is called. The teardown sequence
includes a call to snd_card_free. Its implementation waits until the
refcount of the sound card device drops to zero, however, if its file is
open, snd_card_file_add takes a reference, which can't be dropped during
the suspend, because the userspace processes are already frozen at this
point. snd_card_free waits for completion forever, leading to a hang on
suspend.

This commit fixes this deadlock condition by replacing snd_card_free
with snd_card_free_when_closed, that doesn't wait until all references
are released, allowing suspend to progress.

Fixes: 63ddf68de52e ("[media] usbtv: add audio support")
Signed-off-by: Maxim Mikityanskiy 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: v4l: ioctl: Fix memory leak in video_usercopy

2021-03-07T10:24:22+00:00

commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream.

When an IOCTL with argument size larger than 128 that also used array
arguments were handled, two memory allocations were made but alas, only
the latter one of them was released. This happened because there was only
a single local variable to hold such a temporary allocation.

Fix this by adding separate variables to hold the pointers to the
temporary allocations.

Reported-by: Arnd Bergmann 
Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com
Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus 
Acked-by: Arnd Bergmann 
Acked-by: Hans Verkuil 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: uvcvideo: Allow entities with no pads

2021-03-07T10:24:21+00:00

[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]

Avoid an underflow while calculating the number of inputs for entities
with zero pads.

Signed-off-by: Ricardo Ribalda 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values

2021-03-03T15:44:17+00:00

[ Upstream commit dc9455ffae02d7b7fb51ba1e007fffcb9dc5d890 ]

The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.

The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767

Fixes: 8a652a17e3c0 ("media: uvcvideo: Ensure all probed info is returned to v4l2")
Reported-by: Till Dörges 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: cx25821: Fix a bug when reallocating some dma memory

2021-03-03T15:44:17+00:00

[ Upstream commit b2de3643c5024fc4fd128ba7767c7fb8b714bea7 ]

This function looks like a realloc.

However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.

[hverkuil: NULL != risc->cpu -> risc->cpu]

Fixes: 5ede94c70553 ("[media] cx25821: remove bogus btcx_risc dependency)
Signed-off-by: Christophe JAILLET 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: lmedm04: Fix misuse of comma

2021-03-03T15:44:17+00:00

[ Upstream commit 59a3e78f8cc33901fe39035c1ab681374bba95ad ]

There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.

Replace the comma with a semicolon.

Fixes: 15e1ce33182d ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: tm6000: Fix memleak in tm6000_start_stream

2021-03-03T15:44:17+00:00

[ Upstream commit 76aaf8a96771c16365b8510f1fb97738dc88026e ]

When usb_clear_halt() fails, dvb->bulk_urb->transfer_buffer
and dvb->bulk_urb should be freed just like when
usb_submit_urb() fails.

Fixes: 3169c9b26fffa ("V4L/DVB (12788): tm6000: Add initial DVB-T support")
Signed-off-by: Dinghao Liu 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: media/pci: Fix memleak in empress_init

2021-03-03T15:44:17+00:00

[ Upstream commit 15d0c52241ecb1c9d802506bff6f5c3f7872c0df ]

When vb2_queue_init() fails, dev->empress_dev
should be released just like other error handling
paths.

Fixes: 2ada815fc48bb ("[media] saa7134: convert to vb2")
Signed-off-by: Dinghao Liu 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: gp8psk: initialize stats at power control logic

2021-01-09T12:34:15+00:00

commit d0ac1a26ed5943127cb0156148735f5f52a07075 upstream.

As reported on:
	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
	- if the device was already started;
	- if firmware has loaded;
	- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.

Reported-by: syzbot 
Reported-by: Willem de Bruijn 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman