linux-stable.git/drivers/media, branch v4.4.220

media: xirlink_cit: add missing descriptor sanity checks

2020-04-02T17:02:39+00:00

commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream.

Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.

Note that the sanity check in cit_get_packet_size() is not redundant as
the driver is mixing looking up altsettings by index and by number,
which may not coincide.

Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01")
Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting")
Cc: stable      # 2.6.37
Cc: Hans de Goede 
Signed-off-by: Johan Hovold 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: stv06xx: add missing descriptor sanity checks

2020-04-02T17:02:38+00:00

commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.

Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.

Note that the sanity checks in stv06xx_start() and pb0100_start() are
not redundant as the driver is mixing looking up altsettings by index
and by number, which may not coincide.

Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc: stable      # 2.6.31
Cc: Hans de Goede 
Signed-off-by: Johan Hovold 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: dib0700: fix rc endpoint lookup

2020-04-02T17:02:38+00:00

commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable      # 3.16
Signed-off-by: Johan Hovold 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: ov519: add missing endpoint sanity checks

2020-04-02T17:02:38+00:00

commit 998912346c0da53a6dbb71fab3a138586b596b30 upstream.

Make sure to check that we have at least one endpoint before accessing
the endpoint array to avoid dereferencing a NULL-pointer on stream
start.

Note that these sanity checks are not redundant as the driver is mixing
looking up altsettings by index and by number, which need not coincide.

Fixes: 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge")
Fixes: b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)")
Cc: stable      # 2.6.31
Cc: Hans de Goede 
Signed-off-by: Johan Hovold 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: usbtv: fix control-message timeouts

2020-04-02T17:02:38+00:00

commit 536f561d871c5781bc33d26d415685211b94032e upstream.

The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.

The USB upper limit of five seconds per request should be more than
enough.

Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48f2 ("[media] usbtv: add video controls")
Cc: stable      # 3.11
Signed-off-by: Johan Hovold 
Acked-by: Lubomir Rintel 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: flexcop-usb: fix endpoint sanity check

2020-04-02T17:02:38+00:00

commit bca243b1ce0e46be26f7c63b5591dfbb41f558e5 upstream.

commit 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.

Fix this by moving the sanity check to after the altsetting is changed.

Fixes: 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()

2020-02-28T14:38:53+00:00

[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
    msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
    bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
    _raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai 
Reviewed-by: Fabien Dessenne 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: i2c: mt9v032: fix enum mbus codes and frame sizes

2020-02-28T14:38:53+00:00

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]

This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).

[Sakari Ailus: rewrapped commit message]

Suggested-by: Wenyou Yang 
Signed-off-by: Eugen Hristev 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors

2020-02-14T21:29:54+00:00

commit 68035c80e129c4cfec659aac4180354530b26527 upstream.

Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked
up the following WARNING from the UVC chain scanning code:

  | list_add double add: new=ffff880069084010, prev=ffff880069084010,
  | next=ffff880067d22298.
  | ------------[ cut here ]------------
  | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0
  | Modules linked in:
  | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
  | 4.14.0-rc2-42613-g1488251d1a98 #238
  | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  | Workqueue: usb_hub_wq hub_event
  | task: ffff88006b01ca40 task.stack: ffff880064358000
  | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29
  | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286
  | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000
  | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac
  | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000
  | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010
  | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0
  | FS:  0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
  | CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0
  | Call Trace:
  |  __list_add ./include/linux/list.h:59
  |  list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92
  |  uvc_scan_chain_forward.isra.8+0x373/0x416
  | drivers/media/usb/uvc/uvc_driver.c:1471
  |  uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585
  |  uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769
  |  uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104

Looking into the output from usbmon, the interesting part is the
following data packet:

  ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080
  00090403 00000e01 00000924 03000103 7c003328 010204db

If we drop the lead configuration and interface descriptors, we're left
with an output terminal descriptor describing a generic display:

  /* Output terminal descriptor */
  buf[0]	09
  buf[1]	24
  buf[2]	03	/* UVC_VC_OUTPUT_TERMINAL */
  buf[3]	00	/* ID */
  buf[4]	01	/* type == 0x0301 (UVC_OTT_DISPLAY) */
  buf[5]	03
  buf[6]	7c
  buf[7]	00	/* source ID refers to self! */
  buf[8]	33

The problem with this descriptor is that it is self-referential: the
source ID of 0 matches itself! This causes the 'struct uvc_entity'
representing the display to be added to its chain list twice during
'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is
processed directly from the 'dev->entities' list and then again
immediately afterwards when trying to follow the source ID in
'uvc_scan_chain_forward()'

Add a check before adding an entity to a chain list to ensure that the
entity is not already part of a chain.

Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/

Cc: 
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Reported-by: Andrey Konovalov 
Signed-off-by: Will Deacon 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: iguanair: fix endpoint sanity check

2020-02-14T21:29:53+00:00

[ Upstream commit 1b257870a78b0a9ce98fdfb052c58542022ffb5b ]

Make sure to use the current alternate setting, which need not be the
first one by index, when verifying the endpoint descriptors and
initialising the URBs.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 26ff63137c45 ("[media] Add support for the IguanaWorks USB IR Transceiver")
Fixes: ab1cbdf159be ("media: iguanair: add sanity checks")
Cc: stable      # 3.6
Cc: Oliver Neukum 
Signed-off-by: Johan Hovold 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin