linux-stable.git/drivers/media, branch v4.14.2

media: dib0700: fix invalid dvb_detach argument

2017-11-21T08:49:20+00:00

commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream.

dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer
to a function. Right now a pointer to state->dib7000p_ops is passed to
dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by
syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead.

------------[ cut here ]------------
kernel BUG at kernel/module.c:1081!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G        W
4.14.0-rc1-42251-gebb2c2437d80 #224
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006a336300 task.stack: ffff88006a7c8000
RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083
RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000
RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190
RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4
R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180
R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000
FS:  0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0
Call Trace:
 stk7070p_frontend_attach+0x515/0x610
drivers/media/usb/dvb-usb/dib0700_devices.c:1013
 dvb_usb_adapter_frontend_init+0x32b/0x660
drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886
 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
 hub_port_connect drivers/usb/core/hub.c:4903
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8
de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f>
0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00
RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210
---[ end trace b75b357739e7e116 ]---

Signed-off-by: Andrey Konovalov 
Cc: Ben Hutchings 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: imon: Fix null-ptr-deref in imon_probe

2017-11-21T08:49:20+00:00

commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream.

It seems that the return value of usb_ifnum_to_if() can be NULL and
needs to be checked.

Signed-off-by: Arvind Yadav 
Tested-by: Andrey Konovalov 
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2017-10-17T10:23:09+00:00

Pull media fixes from Mauro Carvalho Chehab:
 "Core fixes:
   - cec: Respond to unregistered initiators, when applicable
   - dvb_frontend: only use kref after initialized

  Driver-specific fixes:
   - qcom, camss: Make function vfe_set_selection static
   - qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA
   - s5p-cec: add NACK detection support
   - media: staging/imx: Fix uninitialized variable warning
   - dib3000mc: i2c transfers over usb cannot be done from stack
   - venus: init registered list on streamoff"

* tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb_frontend: only use kref after initialized
  media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA
  media: cec: Respond to unregistered initiators, when applicable
  media: s5p-cec: add NACK detection support
  media: staging/imx: Fix uninitialized variable warning
  media: qcom: camss: Make function vfe_set_selection static
  media: venus: init registered list on streamoff
  media: dvb: i2c transfers over usb cannot be done from stack

media: dvb_frontend: only use kref after initialized

2017-10-11T16:47:36+00:00

As reported by Laurent, when a DVB frontend need to register
two drivers (e. g. a tuner and a demod), if the second driver
fails to register (for example because it was not compiled),
the error handling logic frees the frontend by calling
dvb_frontend_detach(). That used to work fine, but changeset
1f862a68df24 ("[media] dvb_frontend: move kref to struct dvb_frontend")
added a kref at struct dvb_frontend. So, now, instead of just
freeing the data, the error handling do a kref_put().

That works fine only after dvb_register_frontend() succeeds.

While it would be possible to add a helper function that
would be initializing earlier the kref, that would require
changing every single DVB frontend on non-trivial ways, and
would make frontends different than other drivers.

So, instead of doing that, let's focus on the real issue:
only call kref_put() after kref_init(). That's easy to
check, as, when the dvb frontend is successfuly registered,
it will allocate its own private struct. So, if such
struct is allocated, it means that it is safe to use
kref_put(). If not, then nobody is using yet the frontend,
and it is safe to just deallocate it.

Fixes: 1f862a68df24 ("[media] dvb_frontend: move kref to struct dvb_frontend")

Reported-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab

Update James Hogan's email address

2017-10-05T00:11:53+00:00

Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.

Signed-off-by: James Hogan 
Signed-off-by: Linus Torvalds

media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA

2017-09-23T18:57:21+00:00

If NO_DMA=y:

    warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134 && VIDEO_COBALT && VIDEO_QCOM_CAMSS) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)

and

    ERROR: "bad_dma_ops" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "bad_dma_ops" [drivers/media/platform/qcom/camss-8x16/qcom-camss.ko] undefined!

VIDEO_QCOM_CAMSS selects VIDEOBUF2_DMA_SG, which bypasses its dependency
on HAS_DMA.  Make VIDEO_QCOM_CAMSS depend on HAS_DMA to fix this.

Fixes: f5c074947f56533c ("media: camss: Enable building")

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Hans Verkuil

media: cec: Respond to unregistered initiators, when applicable

2017-09-23T11:30:16+00:00

Running CEC 1.4 compliance test we get the following error on test
11.1.6.2: "ERROR: The DUT did not broadcast a
 message to the unregistered device."

Fix this by letting GIVE_PHYSICAL_ADDR message respond to unregistered
device. Also, GIVE_DEVICE_VENDOR_ID and GIVE_FEATURES fall in the
same category so, respond also to these messages.

With this fix we pass CEC 1.4 official compliance.

Signed-off-by: Jose Abreu 
Cc: Joao Pinto 
Signed-off-by: Hans Verkuil 
Cc:       # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab

media: s5p-cec: add NACK detection support

2017-09-23T11:29:30+00:00

The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition.

Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where
bit 0 indicates if the transmit was nacked or not.

Use this to return the correct CEC_TX_STATUS_NACK status to userspace.

This was the only driver that couldn't tell a NACK from another error, and
that was very unusual. And a potential problem for applications as well.

Tested with my Odroid-U3.

Signed-off-by: Hans Verkuil 
Acked-by: Sylwester Nawrocki 
Cc:       # for v4.12 and up
Signed-off-by: Mauro Carvalho Chehab

media: qcom: camss: Make function vfe_set_selection static

2017-09-23T11:23:49+00:00

The function vfe_set_selection is local to the source and does
not need to be in global scope, so make it static.

Cleans up sparse warning:
warning: symbol 'vfe_set_selection' was not declared. Should it be static?

Signed-off-by: Colin Ian King 
Acked-by: Todor Tomov 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab