linux-stable.git/drivers/media, branch v3.12.72 Linux kernel stable tree uvcvideo: Fix a wrong macro 2017-03-13T20:40:20+00:00 Guennadi Liakhovetski g.liakhovetski@gmx.de 2016-12-12T11:16:51+00:00 1cd25ec766d91b6efa426725a9997692433b18a9 commit 17c341ec0115837a610b2da15e32546e26068234 upstream. Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes. Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc") Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 17c341ec0115837a610b2da15e32546e26068234 upstream.

Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.

Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
siano: make it work again with CONFIG_VMAP_STACK 2017-03-01T09:38:13+00:00 Mauro Carvalho Chehab mchehab@s-opensource.com 2017-02-14T19:47:57+00:00 405a5ed0fb6ee2a3584c25f6092cab3ba1ab4da8 commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream. Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream.

Reported as a Kaffeine bug:
	https://bugs.kde.org/show_bug.cgi?id=375811

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.

Tested with USB ID 2040:5510: Hauppauge Windham

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
s5k4ecgx: select CRC32 helper 2017-02-15T10:56:08+00:00 Arnd Bergmann arnd@arndb.de 2016-12-09T11:41:29+00:00 ba74a41691e417c8c8dedf0b727db7a3a8b34563 commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream. A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream.

A rare randconfig build failure shows up in this driver when
the CRC32 helper is not there:

drivers/media/built-in.o: In function `s5k4ecgx_s_power':
s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le'

This adds the 'select' that all other users of this function have.

Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
xc2028: Fix use-after-free bug properly 2017-01-27T16:14:57+00:00 Takashi Iwai tiwai@suse.de 2016-11-17T09:49:31+00:00 f093600f6a9fd00fa76ad05b8276d4f56c4add78 commit 22a1e7783e173ab3d86018eb590107d68df46c11 upstream. The commit 8dfbcc4351a0 ("[media] xc2028: avoid use after free") tried to address the reported use-after-free by clearing the reference. However, it's clearing the wrong pointer; it sets NULL to priv->ctrl.fname, but it's anyway overwritten by the next line memcpy(&priv->ctrl, p, sizeof(priv->ctrl)). OTOH, the actual code accessing the freed string is the strcmp() call with priv->fname: if (!firmware_name[0] && p->fname && priv->fname && strcmp(p->fname, priv->fname)) free_firmware(priv); where priv->fname points to the previous file name, and this was already freed by kfree(). For fixing the bug properly, this patch does the following: - Keep the copy of firmware file name in only priv->fname, priv->ctrl.fname isn't changed; - The allocation is done only when the firmware gets loaded; - The kfree() is called in free_firmware() commonly Fixes: commit 8dfbcc4351a0 ('[media] xc2028: avoid use after free') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 22a1e7783e173ab3d86018eb590107d68df46c11 upstream.

The commit 8dfbcc4351a0 ("[media] xc2028: avoid use after free") tried
to address the reported use-after-free by clearing the reference.

However, it's clearing the wrong pointer; it sets NULL to
priv->ctrl.fname, but it's anyway overwritten by the next line
memcpy(&priv->ctrl, p, sizeof(priv->ctrl)).

OTOH, the actual code accessing the freed string is the strcmp() call
with priv->fname:
	if (!firmware_name[0] && p->fname &&
	    priv->fname && strcmp(p->fname, priv->fname))
		free_firmware(priv);

where priv->fname points to the previous file name, and this was
already freed by kfree().

For fixing the bug properly, this patch does the following:

- Keep the copy of firmware file name in only priv->fname,
  priv->ctrl.fname isn't changed;
- The allocation is done only when the firmware gets loaded;
- The kfree() is called in free_firmware() commonly

Fixes: commit 8dfbcc4351a0 ('[media] xc2028: avoid use after free')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[media] xc2028: unlock on error in xc2028_set_config() 2017-01-27T16:14:56+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-02-03T15:34:00+00:00 6f9247bccf79bf632384e70eaf04cb65481ead5a commit 210bd104c6acd31c3c6b8b075b3f12d4a9f6b60d upstream. We have to unlock before returning -ENOMEM. Fixes: 8dfbcc4351a0 ('[media] xc2028: avoid use after free') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 210bd104c6acd31c3c6b8b075b3f12d4a9f6b60d upstream.

We have to unlock before returning -ENOMEM.

Fixes: 8dfbcc4351a0 ('[media] xc2028: avoid use after free')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[media] xc2028: avoid use after free 2017-01-27T16:14:55+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2016-01-28T11:22:44+00:00 74e3d04ca992bedac5080ed1a817fabf71667210 commit 8dfbcc4351a0b6d2f2d77f367552f48ffefafe18 upstream. If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64 [11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150 [11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40 [11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550 [11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0 [11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0 [11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0 [11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30 [11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10 [11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0 [11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0 [11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0 [11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0 [11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360 [11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300 [11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400 [11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300 [11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20 [11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70 [11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000 [11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40 [11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0 [11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad [11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0 [11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50 [11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50 [11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0 [11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130 [11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 8dfbcc4351a0b6d2f2d77f367552f48ffefafe18 upstream.

If struct xc2028_config is passed without a firmware name,
the following trouble may happen:

[11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[11009.907491] ==================================================================
[11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40
[11009.907992] Read of size 1 by task modprobe/28992
[11009.907994] =============================================================================
[11009.907997] BUG kmalloc-16 (Tainted: G        W      ): kasan: bad access detected
[11009.907999] -----------------------------------------------------------------------------

[11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992
[11009.908012] 	___slab_alloc+0x581/0x5b0
[11009.908014] 	__slab_alloc+0x51/0x90
[11009.908017] 	__kmalloc+0x27b/0x350
[11009.908022] 	xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd]
[11009.908026] 	usb_hcd_submit_urb+0x1e8/0x1c60
[11009.908029] 	usb_submit_urb+0xb0e/0x1200
[11009.908032] 	usb_serial_generic_write_start+0xb6/0x4c0
[11009.908035] 	usb_serial_generic_write+0x92/0xc0
[11009.908039] 	usb_console_write+0x38a/0x560
[11009.908045] 	call_console_drivers.constprop.14+0x1ee/0x2c0
[11009.908051] 	console_unlock+0x40d/0x900
[11009.908056] 	vprintk_emit+0x4b4/0x830
[11009.908061] 	vprintk_default+0x1f/0x30
[11009.908064] 	printk+0x99/0xb5
[11009.908067] 	kasan_report_error+0x10a/0x550
[11009.908070] 	__asan_report_load1_noabort+0x43/0x50
[11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992
[11009.908077] 	__slab_free+0x2ec/0x460
[11009.908080] 	kfree+0x266/0x280
[11009.908083] 	xc2028_set_config+0x90/0x630 [tuner_xc2028]
[11009.908086] 	xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908090] 	em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908094] 	em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908098] 	em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908101] 	em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908105] 	em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908108] 	do_one_initcall+0x141/0x300
[11009.908111] 	do_init_module+0x1d0/0x5ad
[11009.908114] 	load_module+0x6666/0x9ba0
[11009.908117] 	SyS_finit_module+0x108/0x130
[11009.908120] 	entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x          (null) flags=0x2ffff8000004080
[11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001

[11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00  ....*....(......
[11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff  ...........j....
[11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G    B   W       4.5.0-rc1+ #43
[11009.908140] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[11009.908142]  ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80
[11009.908148]  ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280
[11009.908153]  ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4
[11009.908158] Call Trace:
[11009.908162]  [<ffffffff81932007>] dump_stack+0x4b/0x64
[11009.908165]  [<ffffffff81556759>] print_trailer+0xf9/0x150
[11009.908168]  [<ffffffff8155ccb4>] object_err+0x34/0x40
[11009.908171]  [<ffffffff8155f260>] kasan_report_error+0x230/0x550
[11009.908175]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908179]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908182]  [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50
[11009.908185]  [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0
[11009.908189]  [<ffffffff8194cea6>] ? strcmp+0x96/0xb0
[11009.908192]  [<ffffffff8194cea6>] strcmp+0x96/0xb0
[11009.908196]  [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028]
[11009.908200]  [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908203]  [<ffffffff8155ea78>] ? memset+0x28/0x30
[11009.908206]  [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028]
[11009.908211]  [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908215]  [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb]
[11009.908219]  [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb]
[11009.908222]  [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x]
[11009.908226]  [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x]
[11009.908230]  [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10
[11009.908233]  [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80
[11009.908238]  [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908242]  [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb]
[11009.908245]  [<ffffffff8195222d>] ? string+0x14d/0x1f0
[11009.908249]  [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0
[11009.908253]  [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0
[11009.908257]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908260]  [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0
[11009.908264]  [<ffffffff812e9846>] ? __module_address+0xb6/0x360
[11009.908268]  [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0
[11009.908271]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908275]  [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290
[11009.908278]  [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300
[11009.908282]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908285]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908289]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908292]  [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10
[11009.908296]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908299]  [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400
[11009.908302]  [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300
[11009.908306]  [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20
[11009.908309]  [<ffffffff8159e708>] ? put_object+0x48/0x70
[11009.908314]  [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908317]  [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908320]  [<ffffffffa0150000>] ? 0xffffffffa0150000
[11009.908324]  [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908327]  [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[11009.908330]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[11009.908333]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908337]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908340]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908343]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908346]  [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0
[11009.908350]  [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad
[11009.908353]  [<ffffffff812f2626>] load_module+0x6666/0x9ba0
[11009.908356]  [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50
[11009.908361]  [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb]
[11009.908366]  [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20
[11009.908369]  [<ffffffff815bc940>] ? open_exec+0x50/0x50
[11009.908374]  [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0
[11009.908377]  [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130
[11009.908379]  [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0
[11009.908383]  [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[11009.908394]  [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908396] Memory state around the buggy address:
[11009.908398]  ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908401]  ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc
[11009.908405]                                            ^
[11009.908407]  ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908409]  ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908411] ==================================================================

In order to avoid it, let's set the cached value of the firmware
name to NULL after freeing it. While here, return an error if
the memory allocation fails.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
ite-cir: initialize use_demodulator before using it 2017-01-27T10:15:58+00:00 Nicolas Iooss nicolas.iooss_linux@m4x.org 2016-09-10T16:59:49+00:00 1c4d4c690779ca67b2b8f654a5183fae69eca8d2 commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream. Function ite_set_carrier_params() uses variable use_demodulator after having initialized it to false in some if branches, but this variable is never set to true otherwise. This bug has been found using clang -Wsometimes-uninitialized warning flag. Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for several ITE CIRs") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream.

Function ite_set_carrier_params() uses variable use_demodulator after
having initialized it to false in some if branches, but this variable is
never set to true otherwise.

This bug has been found using clang -Wsometimes-uninitialized warning
flag.

Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for
several ITE CIRs")

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
dib0700: fix nec repeat handling 2016-11-24T15:23:41+00:00 Sean Young sean@mess.org 2016-11-10T16:44:49+00:00 462a6dac43f454a1baf4b381893ff7db2741beb8 commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream. When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by: Sean Young <sean@mess.org> Tested-by: Sean Young <sean@mess.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream.

When receiving a nec repeat, ensure the correct scancode is repeated
rather than a random value from the stack.  This removes the need for
the bogus uninitialized_var() and also fixes the warnings:

    drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’:
    drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function

[sean addon: So after writing the patch and submitting it, I've bought the
             hardware on ebay. Without this patch you get random scancodes
             on nec repeats, which the patch indeed fixes.]

Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Sean Young <sean@mess.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
cx231xx: fix GPIOs for Pixelview SBTVD hybrid 2016-10-28T18:36:58+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2016-09-04T13:06:39+00:00 9802f2db0751d0e3669b730fe55dda95bd9628ad commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream. This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream.

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
cx231xx: don't return error on success 2016-10-28T18:36:58+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2016-09-04T12:56:33+00:00 38cbcc780bd8a6f3133b1ddb9843401217a49033 commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream. The cx231xx_set_agc_analog_digital_mux_select() callers expect it to return 0 or an error. Returning a positive value makes the first attempt to switch between analog/digital to fail. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream.

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>