Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.

  Lots of driver work for new devices and systems, and many other minor
  fixes and updates. Included in here are:

   - Thunderbolt subsystem driver updates and additions

   - typec driver updates and additions

   - usb gadget fixes all over the place, seems like people are finally
     paying attention to these drivers for some reason

   - xhci driver updates and fixes based on lots of reports

   - usb-serial driver updates and additions

   - new device ids

   - other minor USB driver updates and fixes

  All of these have been in linux-next for a while with no reported issues"

* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
  usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
  usb: typec: hd3ss3220: fix VBUS regulator error message
  usb: usbfs: fix use-after-free of usb_device in usbdev_release()
  usb: gadget: u_audio: Fix use-after-free on sound card disconnect
  usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
  usb: gadget: f_tcm: keep port count until LUN teardown completes
  usb: usbtest: disable dynamic ID support
  usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
  USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
  usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
  usb: gadget: snps_udc_plat: clean up PHY on probe deferral
  usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
  usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
  usb: gadget: f_fs: Fix Use-After-Free in AIO error path
  usb: gadget: f_fs: Prevent deadlock during ep0 read loop
  usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
  usb: gadget: midi2: remove default configfs groups on teardown
  usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
  usb: typec: thunderbolt: Disable work before freeing tbt on remove
  usb: xhci: Handle bogus TRB pointers in Missed Service Error events
  ...

Pull bitmap updates from Yury Norov:
 "The usual set of fixes, cleanups and performance improvements together
  with a couple of new tests:

   - bitmap_find_next_zero_area_off() optimization (Sunyi)

   - bitmap_find_next_zero_area_off(): return size when no zero area is
     found (Yury)

   - bitmap vs IDA vs Maple Tree performance test (Yury)

   - get rid of cpumap_print_to_pagebuf() (Yury)

   - use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing)

   - bitops: make the *_bit_le functions use unsigned long (Benjamin)

   - bitmap scatter & gather test fix (Christophe)

   - use __ASSEMBLER__ in bitmap header files (Thomas)"

* tag 'bitmap-for-7.3' of https://github.com/norov/linux: (25 commits)
  lib: test bitmap vs IDA vs Maple Tree performance for region allocations
  bitmap: Return size when no zero area is found
  media: s5p-mfc: Treat bitmap size as allocation failure
  crypto: ccp: Treat bitmap size as allocation failure
  powerpc/msi: Treat bitmap size as allocation failure
  ARM: dma-mapping: Treat bitmap size as allocation failure
  bitmap: drop bitmap_next_set_region()
  nodemask: reduce bitmap width to nr_node_ids in __nodemask_pr_numnodes()
  bitmap: Properly initialise destination bitmap for scatter & gather test
  lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
  perf: Use sysfs_emit() for cpumask show callbacks
  PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
  RDMA/hfi1: Use sysfs_emit() for cpumask show helper
  hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show
  fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
  devfreq: Use sysfs_emit() for cpumask show callbacks
  cpu: Use sysfs_emit() for cpumask show callback
  x86/events: Use sysfs_emit() for cpumask show callbacks
  powerpc: Use sysfs_emit() for cpumask show callbacks
  arm: Use sysfs_emit() for cpumask show callbacks
  ...

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

QCOM_UBWC_CONFIG is about to depend on QCOM_SMEM. Guard the
VIDEO_QCOM_IRIS select with 'if ARCH_QCOM && QCOM_SMEM', and add
'depends on QCOM_SMEM || QCOM_SMEM=n' so a built-in driver is never
selected against a missing or modular SMEM.

Fixes: c43207553867 ("media: iris: retrieve UBWC platform configuration")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A machine can have more than one sensor whose rotation needs to be
overridden, which takes one upside_down_sensor_dmi_ids[] entry per
sensor, all sharing the same DMI match but with different ACPI HIDs in
driver_data.

ipu_bridge_parse_rotation() uses dmi_first_match(), which always stops
at the first entry matching the running machine, so any further entry
for the same machine is unreachable and only one sensor per machine can
ever be corrected.

Walk the whole table and match every entry for the running machine
against the sensor's ACPI HID instead.

Fixes: b75710155a82 ("media: ipu-bridge: Add DMI quirk for Dell XPS laptops with upside down sensors")
Cc: stable@vger.kernel.org
Signed-off-by: José María Martín <jmmartinf@hotmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.

If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.

Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back.

Fixes: 28a1295795d8 ("media: v4l: async: Allow multiple connections between entities")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

The RZ/G3E CRU programs the line stride via the AMnIS register, whose
IS field encodes the value in units of 128 bytes. If bytesperline is
not a multiple of 128, the division truncates and the hardware uses a
wrong stride, causing horizontal banding.

Commit ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
replaced the open-coded aligned calculation with v4l2_fill_pixfmt(),
which sets no alignment, reintroducing the issue.

Round bytesperline up to RZG2L_CRU_STRIDE_ALIGN and recompute
sizeimage when info->has_stride is set. RZ/G2L has no AMnIS register
and keeps the values from v4l2_fill_pixfmt() unchanged.

Fixes: ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.

The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too.

Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.

Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered.

Fixes: 4e5e7a7ddb4a ("media: platform: amd: isp4 subdev and firmware loading handling added")
Assisted-by: Claude:claude-opus-4-8 smatch
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.

Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.

isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent.

Fixes: 4c5feef6a62c ("media: platform: amd: Add isp4 fw and hw interface")
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>