linux-stable.git/drivers/media, branch linux-6.3.y

media: cec: core: don't set last_initiator if tx in progress

2023-06-28T09:14:19+00:00

[ Upstream commit 73af6c7511038249cad3d5f3b44bf8d78ac0f499 ]

When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: cec: core: disable adapter in cec_devnode_unregister

2023-06-28T09:14:18+00:00

[ Upstream commit fe4526d99e2e06b08bb80316c3a596ea6a807b75 ]

Explicitly disable the CEC adapter in cec_devnode_unregister()

Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

2023-06-21T14:02:17+00:00

[ Upstream commit ec21a38df77a5aefbd2f70c48127003b6f259cf3 ]

As reported by Thomas Voegtle , sometimes a DVB card does
not initialize properly booting Linux 6.4-rc4. This is not always, maybe
in 3 out of 4 attempts.

After double-checking, the root cause seems to be related to the
UAF fix, which is causing a race issue:

[   26.332149] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware
[   26.340779] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw'
[  989.277402] INFO: task vdr:743 blocked for more than 491 seconds.
[  989.283504]       Not tainted 6.4.0-rc5-i5 #249
[  989.288036] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  989.295860] task:vdr             state:D stack:0     pid:743   ppid:711    flags:0x00004002
[  989.295865] Call Trace:
[  989.295867]  
[  989.295869]  __schedule+0x2ea/0x12d0
[  989.295877]  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
[  989.295881]  schedule+0x57/0xc0
[  989.295884]  schedule_preempt_disabled+0xc/0x20
[  989.295887]  __mutex_lock.isra.16+0x237/0x480
[  989.295891]  ? dvb_get_property.isra.10+0x1bc/0xa50
[  989.295898]  ? dvb_frontend_stop+0x36/0x180
[  989.338777]  dvb_frontend_stop+0x36/0x180
[  989.338781]  dvb_frontend_open+0x2f1/0x470
[  989.338784]  dvb_device_open+0x81/0xf0
[  989.338804]  ? exact_lock+0x20/0x20
[  989.338808]  chrdev_open+0x7f/0x1c0
[  989.338811]  ? generic_permission+0x1a2/0x230
[  989.338813]  ? link_path_walk.part.63+0x340/0x380
[  989.338815]  ? exact_lock+0x20/0x20
[  989.338817]  do_dentry_open+0x18e/0x450
[  989.374030]  path_openat+0xca5/0xe00
[  989.374031]  ? terminate_walk+0xec/0x100
[  989.374034]  ? path_lookupat+0x93/0x140
[  989.374036]  do_filp_open+0xc0/0x140
[  989.374038]  ? __call_rcu_common.constprop.91+0x92/0x240
[  989.374041]  ? __check_object_size+0x147/0x260
[  989.374043]  ? __check_object_size+0x147/0x260
[  989.374045]  ? alloc_fd+0xbb/0x180
[  989.374048]  ? do_sys_openat2+0x243/0x310
[  989.374050]  do_sys_openat2+0x243/0x310
[  989.374052]  do_sys_open+0x52/0x80
[  989.374055]  do_syscall_64+0x5b/0x80
[  989.421335]  ? __task_pid_nr_ns+0x92/0xa0
[  989.421337]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421339]  ? do_syscall_64+0x67/0x80
[  989.421341]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421343]  ? do_syscall_64+0x67/0x80
[  989.421345]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  989.421348] RIP: 0033:0x7fe895d067e3
[  989.421349] RSP: 002b:00007fff933c2ba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[  989.421351] RAX: ffffffffffffffda RBX: 00007fff933c2c10 RCX: 00007fe895d067e3
[  989.421352] RDX: 0000000000000802 RSI: 00005594acdce160 RDI: 00000000ffffff9c
[  989.421353] RBP: 0000000000000802 R08: 0000000000000000 R09: 0000000000000000
[  989.421353] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001
[  989.421354] R13: 00007fff933c2ca0 R14: 00000000ffffffff R15: 00007fff933c2c90
[  989.421355]  

This reverts commit 6769a0b7ee0c3b31e1b22c3fadff2bfb642de23f.

Fixes: 6769a0b7ee0c ("media: dvb-core: Fix use-after-free on race condition at dvb_frontend")
Link: https://lore.kernel.org/all/da5382ad-09d6-20ac-0d53-611594b30861@lio96.de/
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: uvcvideo: Don't expose unsupported formats to userspace

2023-06-09T08:48:12+00:00

[ Upstream commit 81f3affa19d6ab0c32aef46b053838219eef7e71 ]

When the uvcvideo driver encounters a format descriptor with an unknown
format GUID, it creates a corresponding struct uvc_format instance with
the fcc field set to 0. Since commit 50459f103edf ("media: uvcvideo:
Remove format descriptions"), the driver relies on the V4L2 core to
provide the format description string, which the V4L2 core can't do
without a valid 4CC. This triggers a WARN_ON.

As a format with a zero 4CC can't be selected, it is unusable for
applications. Ignore the format completely without creating a uvc_format
instance, which fixes the warning.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107

Fixes: 50459f103edf ("media: uvcvideo: Remove format descriptions")
Signed-off-by: Laurent Pinchart 
Reviewed-by: Ricardo Ribalda 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats

2023-06-09T08:48:11+00:00

[ Upstream commit ed17f89e9502f03af493e130620a9bb74c07cf28 ]

When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip
formats that are not MTK_FMT_DEC so only decoder formats is updated in
mtk_init_vdec_params.

Fixes: e25528e1dbe5 ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder")
Signed-off-by: Pin-yen Lin 
Reviewed-by: Chen-Yu Tsai 
Reviewed-by: Yunfei Dong 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221

2023-06-09T08:48:05+00:00

[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]

If the device node of dvb_ca_en50221 is open() and the
device is disconnected, a UAF may occur when calling
close() on the device node.

The root cause is that wake_up() and wait_event() for
dvbdev->wait_queue are not implemented.

So implement wait_event() function in dvb_ca_en50221_release()
and add 'remove_mutex' which prevents race condition
for 'ca->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu
Signed-off-by: Hyunwoo Kim 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()

2023-06-09T08:48:05+00:00

[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]

Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
  do not call blocking ops when !TASK_RUNNING; state=1 set at
  prepare_to_wait_event+0x6d/0x690

For avoiding the potential deadlock, rewrite to an open-coded loop
instead.  Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.

CVE-2023-31084 was assigned to this bug.

Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/

Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de
Reported-by: Yu Hao 
Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084
Signed-off-by: Takashi Iwai 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dvb-core: Fix use-after-free due to race at dvb_register_device()

2023-06-09T08:48:05+00:00

[ Upstream commit 627bb528b086b4136315c25d6a447a98ea9448d3 ]

dvb_register_device() dynamically allocates fops with kmemdup()
to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops()
in the dvb_device_open() process, and kfree()d in dvb_free_device().

However, it is not common to use dynamically allocated fops instead
of 'static const' fops as an argument of replace_fops(),
and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(),
such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.

So, instead of kfree() the fops dynamically allocated in
dvb_register_device() in dvb_free_device() called during the
.disconnect() process, kfree() it collectively in exit_dvbdev()
called when the dvbdev.c module is removed.

Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim 
Reported-by: kernel test robot 
Reported-by: Dan Carpenter 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dvb-core: Fix use-after-free due on race condition at dvb_net

2023-06-09T08:48:05+00:00

[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]

A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.

The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.

So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: dvb-core: Fix use-after-free on race condition at dvb_frontend

2023-06-09T08:48:05+00:00

[ Upstream commit 6769a0b7ee0c3b31e1b22c3fadff2bfb642de23f ]

If the device node of dvb_frontend is open() and the device is
disconnected, many kinds of UAFs may occur when calling close()
on the device node.

The root cause of this is that wake_up() for dvbdev->wait_queue
is implemented in the dvb_frontend_release() function, but
wait_event() is not implemented in the dvb_frontend_stop() function.

So, implement wait_event() function in dvb_frontend_stop() and
add 'remove_mutex' which prevents race condition for 'fe->exit'.

[mchehab: fix a couple of checkpatch warnings and some mistakes at the error handling logic]

Link: https://lore.kernel.org/linux-media/20221117045925.14297-2-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin