linux-stable.git/drivers/media, branch linux-2.6.33.y Linux kernel stable tree tuner_xc2028: Allow selection of the frequency adjustment code for XC3028 2011-11-07T21:47:32+00:00 Mauro Carvalho Chehab mchehab@redhat.com 2011-07-28T19:38:54+00:00 76faaf6dde04f5acd5be8161af3c07249cce6a70 commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream. This device is not using the proper demod IF. Instead of using the IF macro, it is specifying a IF frequency. This doesn't work, as xc3028 needs to load an specific SCODE for the tuner. In this case, there's no IF table for 5 MHz. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream.

This device is not using the proper demod IF. Instead of using the
IF macro, it is specifying a IF frequency. This doesn't work, as xc3028
needs to load an specific SCODE for the tuner. In this case, there's
no IF table for 5 MHz.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uvcvideo: Set alternate setting 0 on resume if the bus has been reset 2011-11-07T21:47:31+00:00 Ming Lei tom.leiming@gmail.com 2011-07-16T03:51:00+00:00 81e249443b97a8fec7e95030b8393853f1c0cf5b commit d59a7b1dbce8b972ec2dc9fcaaae0bfa23687423 upstream. If the bus has been reset on resume, set the alternate setting to 0. This should be the default value, but some devices crash or otherwise misbehave if they don't receive a SET_INTERFACE request before any other video control request. Microdia's 0c45:6437 camera has been found to require this change or it will stop sending video data after resume. uvc_video.c] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit d59a7b1dbce8b972ec2dc9fcaaae0bfa23687423 upstream.

If the bus has been reset on resume, set the alternate setting to 0.
This should be the default value, but some devices crash or otherwise
misbehave if they don't receive a SET_INTERFACE request before any other
video control request.

Microdia's 0c45:6437 camera has been found to require this change or it
will stop sending video data after resume.

uvc_video.c]

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
si4713-i2c: avoid potential buffer overflow on si4713 2011-08-08T17:35:44+00:00 Mauro Carvalho Chehab mchehab@redhat.com 2011-07-17T03:24:37+00:00 27a22f3c622a9ecd8c51a6516ecc039b714c51a1 commit dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 upstream. While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 upstream.

While compiling it with Fedora 15, I noticed this issue:

  inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24:
  arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bttv: fix s_tuner for radio 2011-08-08T17:35:39+00:00 Hans Verkuil hans.verkuil@cisco.com 2011-06-12T10:02:43+00:00 699909bab8955ffa86db1d7be17dbc9859be4388 commit a024c1a6b274e11596d124619e43c25560f64c01 upstream. Fix typo: g_tuner should have been s_tuner. Tested with a bttv card. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit a024c1a6b274e11596d124619e43c25560f64c01 upstream.

Fix typo: g_tuner should have been s_tuner.

Tested with a bttv card.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pvrusb2: fix g/s_tuner support 2011-08-08T17:35:38+00:00 Hans Verkuil hans.verkuil@cisco.com 2011-06-12T09:39:52+00:00 6fce3a42556b9e5b0ccd965e10da86687dca0aa0 commit 50e9efd60b213ce43ad6979bfc18e25eec2d8413 upstream. The tuner-core subdev requires that the type field of v4l2_tuner is filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't use that yet, so we have to do it manually based on whether the current input is radio or not. Tested with my pvrusb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 50e9efd60b213ce43ad6979bfc18e25eec2d8413 upstream.

The tuner-core subdev requires that the type field of v4l2_tuner is
filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't
use that yet, so we have to do it manually based on whether the current
input is radio or not.

Tested with my pvrusb2.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner 2011-08-08T17:35:37+00:00 Hans Verkuil hans.verkuil@cisco.com 2011-06-12T09:36:41+00:00 4776b9777d9575cae6ff9220b13e02029f724c74 commit 227690df75382e46a4f6ea1bbc5df855a674b47f upstream. The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 227690df75382e46a4f6ea1bbc5df855a674b47f upstream.

The subdevs are supposed to receive a valid tuner type for the g_frequency
and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill
this in v4l2-ioctl.c based on whether the device node from which this is
called is a radio node or not.

The spec does not require applications to fill in the type, and if they
leave it at 0 then the 'check_mode' call in tuner-core.c will return
an error and the ioctl does nothing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uvcvideo: Remove buffers from the queues when freeing 2011-07-13T03:31:24+00:00 Sjoerd Simons sjoerd.simons@collabora.co.uk 2011-05-24T15:22:03+00:00 5c0a75906a5ee6152e0e604aef32788b683a1815 commit 8ca2c80b170c47eeb55f0c2a0f2b8edf85f35d49 upstream. When freeing memory for the video buffers also remove them from the irq & main queues. This fixes an oops when doing the following: open ("/dev/video", ..) VIDIOC_REQBUFS VIDIOC_QBUF VIDIOC_REQBUFS close () As the second VIDIOC_REQBUFS will cause the list entries of the buffers to be cleared while they still hang around on the main and irc queues Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 8ca2c80b170c47eeb55f0c2a0f2b8edf85f35d49 upstream.

When freeing memory for the video buffers also remove them from the
irq & main queues.

This fixes an oops when doing the following:

open ("/dev/video", ..)
VIDIOC_REQBUFS
VIDIOC_QBUF
VIDIOC_REQBUFS
close ()

As the second VIDIOC_REQBUFS will cause the list entries of the buffers
to be cleared while they still hang around on the main and irc queues

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pci 2011-05-09T23:04:39+00:00 Patrick Boettcher pboettcher@kernellabs.com 2011-04-03T15:40:24+00:00 a5c59d228f54eaa8eac3cdd45ba97c9b6f1d77ab commit b934c20de1398d4a82d2ecfeb588a214a910f13f upstream. This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Steffen Barszus <steffenbpunkt@googlemail.com> Cc: Boris Cuber <me@boris64.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit b934c20de1398d4a82d2ecfeb588a214a910f13f upstream.

This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good.
This has been fixed in several attempts by several people, but obviously never made it into the kernel.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Cc: Steffen Barszus <steffenbpunkt@googlemail.com>
Cc: Boris Cuber <me@boris64.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
video: sn9c102: world-wirtable sysfs files 2011-04-22T15:49:57+00:00 Vasiliy Kulikov segoon@openwall.com 2011-02-04T12:23:33+00:00 3c2c48d6f8e836bd2703c63520f39372168f4099 commit 14ddc3188d50855ae2a419a6aced995e2834e5d4 upstream. Don't allow everybody to change video settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 14ddc3188d50855ae2a419a6aced995e2834e5d4 upstream.

Don't allow everybody to change video settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uvcvideo: Fix descriptor parsing for video output devices 2011-03-28T14:31:22+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2011-02-23T14:19:17+00:00 f8d5be3efe20eae24fc0ed4f99b6c9ef5ac38aeb commit 4093a5c4a3f59cba1a085bbf87b6ffdddc5a443d upstream. Commit 4057ac6ca9a77c4275b34b5925ab5c99557913b1 V4L/DVB (13505): uvcvideo: Refactor chain scan broke output terminals parsing. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 4093a5c4a3f59cba1a085bbf87b6ffdddc5a443d upstream.

Commit 4057ac6ca9a77c4275b34b5925ab5c99557913b1

    V4L/DVB (13505): uvcvideo: Refactor chain scan

broke output terminals parsing. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>