linux-stable.git/drivers/media/platform, branch v6.0

media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)

2022-09-27T08:24:44+00:00

Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource
from DT core") removed support for calling platform_get_resource(...,
IORESOURCE_IRQ, ...) on DT-based drivers, but the probe() function of
mtk-vcodec's encoder was still making use of it. This caused the encoder
driver to fail probe.

Since the platform_get_resource() call was only being used to check for
the presence of the interrupt (its returned resource wasn't even used)
and platform_get_irq() was already being used to get the IRQ, simply
drop the use of platform_get_resource(IORESOURCE_IRQ) and handle the
failure of platform_get_irq(), to get the driver probing again.

[hverkuil: drop unused struct resource *res]

Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Nícolas F. R. A. Prado 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-08-08T21:29:00+00:00

Pull more power management updates from Rafael Wysocki:
 "These are ARM cpufreq updates and operating performance points (OPP)
  updates plus one cpuidle update adding a new trace point.

  Specifics:

   - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).

   - Minor cleanups and support for new boards for Qcom cpufreq drivers
     (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).

   - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).

   - Make dev_pm_opp_set_regulators() accept NULL terminated list
     (Viresh Kumar).

   - Add dev_pm_opp_set_config() and friends and migrate other users and
     helpers to using them (Viresh Kumar).

   - Add support for multiple clocks for a device (Viresh Kumar and
     Krzysztof Kozlowski).

   - Configure resources before adding OPP table for Venus (Stanimir
     Varbanov).

   - Keep reference count up for opp->np and opp_table->np while they
     are still in use (Liang He).

   - Minor OPP cleanups (Viresh Kumar and Yang Li).

   - Add a trace event for cpuidle to track missed (too deep or too
     shallow) wakeups (Kajetan Puchalski)"

* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  cpuidle: Add cpu_idle_miss trace event
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  ...

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2022-08-04T19:12:54+00:00

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...

venus: pm_helpers: Fix warning in OPP during probe

2022-08-02T04:14:22+00:00

Fix the following WARN triggered during Venus driver probe on
5.19.0-rc8-next-20220728:

 WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610
 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor
  qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+)
  videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched
  snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats
  drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5
  phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro
  lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers
  qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector
  drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6
 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4
 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : dev_pm_opp_set_config+0x49c/0x610
 lr : dev_pm_opp_set_config+0x58/0x610
 sp : ffff8000093c3710
 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00
 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810
 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810
 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000
 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858
 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000
 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0
 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640
 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008
 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860
 Call trace:
  dev_pm_opp_set_config+0x49c/0x610
  devm_pm_opp_set_config+0x18/0x70
  vcodec_domains_get+0xb8/0x1638 [venus_core]
  core_get_v4+0x1d8/0x218 [venus_core]
  venus_probe+0xf4/0x468 [venus_core]
  platform_probe+0x68/0xd8
  really_probe+0xbc/0x2a8
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0x3c/0xf0
  __driver_attach+0x70/0x120
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x200
  driver_register+0x64/0x120
  __platform_driver_register+0x28/0x38
  qcom_venus_driver_init+0x24/0x1000 [venus_core]
  do_one_initcall+0x54/0x1c8
  do_init_module+0x44/0x1d0
  load_module+0x16c8/0x1aa0
  __do_sys_finit_module+0xbc/0x110
  __arm64_sys_finit_module+0x20/0x30
  invoke_syscall+0x44/0x108
  el0_svc_common.constprop.0+0xcc/0xf0
  do_el0_svc+0x2c/0xb8
  el0_svc+0x2c/0x88
  el0t_64_sync_handler+0xb8/0xc0
  el0t_64_sync+0x18c/0x190
  qcom-venus: probe of aa00000.video-codec failed with error -16

The fix is re-ordering the code related to OPP core. The OPP core
expects all configuration options to be provided before the OPP
table is added.

Reported-by: Linux Kernel Functional Testing 
Suggested-by: Viresh Kumar 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Viresh Kumar

media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling

2022-07-27T18:26:31+00:00

Both sun6i_mipi_csi2.c and sun8i_a83t_mipi_csi2.c have the same issue:
the comment before the ret = 0 assignment is incorrect, drop it and
always assign the result of the v4l2_subdev_call(..., 0) to ret.

In the disable label check for !on and set ret to 0 in that case.

This fixes two smatch warnings:

drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:193 sun6i_mipi_csi2_s_stream() warn: missing error code 'ret'
drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:225 sun8i_a83t_mipi_csi2_s_stream() warn: missing error code 'ret'

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: rkisp1: debug: Add dump file in debugfs for MI main path registers

2022-07-17T11:34:43+00:00

Add a register dump file in debugfs for some of the buffer-related
registers for the main path in MI (for the base address, the size, and
the offset). Also dump the corresponding shadow registers.

Signed-off-by: Paul Elder 
Reviewed-by: Dafna Hirschfeld 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab

media: rkisp1: Make the internal CSI-2 receiver optional

2022-07-17T11:34:14+00:00

Not all ISP versions integrate a MIPI CSI-2 receiver.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Dafna Hirschfeld 
Signed-off-by: Mauro Carvalho Chehab

media: rkisp1: Add infrastructure to support ISP features

2022-07-17T11:33:49+00:00

Different ISP versions implement different sets of features. The driver
already takes the version into account in several places, but this
approach won't scale well for features that are found in different
versions. Introduce a new mechanism using a features bitmask in the
rkisp1_info structure to indicate which features the ISP support.

The first feature bit tells if the ISP has an internal CSI-2 receiver,
which is not available in all ISP versions.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Dafna Hirschfeld 
Signed-off-by: Mauro Carvalho Chehab

media: rkisp1: Support the ISP parallel input

2022-07-17T11:33:05+00:00

The ISP has a parallel input, exposed through port 1 in the device tree
node. While the driver supports configuring the ISP for the parallel and
BT.656 input modes, the DT parsing code, the subdev bound handler and
the ISP stream start handler only support the CSI input. Extend them to
support the parallel input.

Signed-off-by: Paul Elder 
Signed-off-by: Laurent Pinchart 
Reviewed-by: Dafna Hirschfeld 
Signed-off-by: Mauro Carvalho Chehab

media: rkisp1: Use fwnode_graph_for_each_endpoint

2022-07-17T11:32:16+00:00

When registering the notifier, replace the manual while loop with
fwnode_graph_for_each_endpoint. This simplifies error handling.

Signed-off-by: Paul Elder 
Reviewed-by: Dafna Hirschfeld 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab