linux-stable.git/drivers/media/platform, branch v5.10 Linux kernel stable tree media: venus: pm_helpers: Fix kernel module reload 2020-11-16T18:06:10+00:00 Stanimir Varbanov stanimir.varbanov@linaro.org 2020-11-01T12:35:52+00:00 9215f6bb4705ffe205885411394732bfc439dee0 After initial kernel module load during kernel boot and removing the module and try to load it again an Unable to handle kernel paging request is observed: Unable to handle kernel paging request at virtual address ffffa44f7416eae0 Mem abort info: ESR = 0x96000047 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000008147c000 [ffffa44f7416eae0] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9e003, pmd=000000017df9b003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Modules linked in: venus_core(+) snd_soc_wsa881x regmap_sdw af_alg snd_soc_wcd934x soundwire_qcom gpio_wcd934x q6asm_dai q6routing q6adm q6afe_dai snd_soc_hdmi_codec q6afe q6asm q6dsp_common q6cor display_connector rmtfs_mem drm ip_tables x_tables ipv6 [last unloaded: venus_core] CPU: 6 PID: 889 Comm: modprobe Tainted: G W 5.10.0-rc1+ #8 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 80400085 (Nzcv daIf +PAN -UAO -TCO BTYPE=--) pc : queued_spin_lock_slowpath+0x1dc/0x3c8 lr : do_raw_spin_lock+0xc0/0x118 sp : ffff8000142cb7b0 x29: ffff8000142cb7b0 x28: 0000000000000013 x27: ffffa44f72de5690 x26: 0000000000000003 x25: ffff17c2d00f8080 x24: ffff17c2c0d78010 x23: ffff17c2c0d4f700 x22: ffff17c2d00f8080 x21: 0000000000000000 x20: ffffa44f74148000 x19: ffff17c2c0d4f8f8 x18: 0000000000000000 x17: 0000000000000000 x16: ffffa44f7342f158 x15: 0000000000000040 x14: ffffa44f746e8320 x13: 0000000000000228 x12: 0000000000000020 x11: 0000000000000000 x10: 00000000001c0000 x9 : 0000000000000000 x8 : ffff17c33d746ac0 x7 : ffff17c2c109b000 x6 : ffffa44f7416eac0 x5 : ffff17c33d746ac0 x4 : 0000000000000000 x3 : ffff17c2c0d4f8f8 x2 : ffffa44f7416eae0 x1 : ffffa44f7416eae0 x0 : ffff17c33d746ac8 Call trace: queued_spin_lock_slowpath+0x1dc/0x3c8 do_raw_spin_lock+0xc0/0x118 _raw_spin_lock_irqsave+0x80/0x14c __pm_runtime_resume+0x38/0xb8 device_link_add+0x3b8/0x5d0 core_get_v4+0x268/0x2d8 [venus_core] venus_probe+0x108/0x458 [venus_core] platform_drv_probe+0x54/0xa8 really_probe+0xe4/0x3b0 driver_probe_device+0x58/0xb8 device_driver_attach+0x74/0x80 __driver_attach+0x58/0xe8 bus_for_each_dev+0x70/0xc0 driver_attach+0x24/0x30 bus_add_driver+0x150/0x1f8 driver_register+0x64/0x120 __platform_driver_register+0x48/0x58 qcom_venus_driver_init+0x20/0x1000 [venus_core] do_one_initcall+0x84/0x458 do_init_module+0x58/0x208 load_module+0x1ec0/0x26a8 __do_sys_finit_module+0xb8/0xf8 __arm64_sys_finit_module+0x20/0x30 el0_svc_common.constprop.0+0x7c/0x1c0 do_el0_svc+0x24/0x90 el0_sync_handler+0x180/0x188 el0_sync+0x174/0x180 Code: 91002100 8b0200c2 f861d884 aa0203e1 (f8246828) ---[ end trace f1f687c15fd6b2ca ]--- note: modprobe[889] exited with preempt_count 1 After revisit the OPP part of the code I found that OPP pmdomain is detached with direct call to dev_pm_domain_detach instead of OPP wraper for detaching pmdomains with OPP table. Correct this by calling the OPP dev_pm_opp_detach_genpd. Fixes: 9a538b83612c ('media: venus: core: Add support for opp tables/perf voting') Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
After initial kernel module load during kernel boot and removing
the module and try to load it again an Unable to handle kernel
paging request is observed:

Unable to handle kernel paging request at virtual address ffffa44f7416eae0
 Mem abort info:
   ESR = 0x96000047
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000008147c000
 [ffffa44f7416eae0] pgd=000000017df9f003, p4d=000000017df9f003,
 pud=000000017df9e003, pmd=000000017df9b003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Modules linked in: venus_core(+) snd_soc_wsa881x regmap_sdw af_alg
  snd_soc_wcd934x soundwire_qcom gpio_wcd934x q6asm_dai q6routing
  q6adm q6afe_dai snd_soc_hdmi_codec q6afe q6asm q6dsp_common q6cor
  display_connector rmtfs_mem drm ip_tables x_tables ipv6
  [last unloaded: venus_core]
 CPU: 6 PID: 889 Comm: modprobe Tainted: G        W      5.10.0-rc1+ #8
 Hardware name: Thundercomm Dragonboard 845c (DT)
 pstate: 80400085 (Nzcv daIf +PAN -UAO -TCO BTYPE=--)
 pc : queued_spin_lock_slowpath+0x1dc/0x3c8
 lr : do_raw_spin_lock+0xc0/0x118
 sp : ffff8000142cb7b0
 x29: ffff8000142cb7b0 x28: 0000000000000013
 x27: ffffa44f72de5690 x26: 0000000000000003
 x25: ffff17c2d00f8080 x24: ffff17c2c0d78010
 x23: ffff17c2c0d4f700 x22: ffff17c2d00f8080
 x21: 0000000000000000 x20: ffffa44f74148000
 x19: ffff17c2c0d4f8f8 x18: 0000000000000000
 x17: 0000000000000000 x16: ffffa44f7342f158
 x15: 0000000000000040 x14: ffffa44f746e8320
 x13: 0000000000000228 x12: 0000000000000020
 x11: 0000000000000000 x10: 00000000001c0000
 x9 : 0000000000000000 x8 : ffff17c33d746ac0
 x7 : ffff17c2c109b000 x6 : ffffa44f7416eac0
 x5 : ffff17c33d746ac0 x4 : 0000000000000000
 x3 : ffff17c2c0d4f8f8 x2 : ffffa44f7416eae0
 x1 : ffffa44f7416eae0 x0 : ffff17c33d746ac8
 Call trace:
  queued_spin_lock_slowpath+0x1dc/0x3c8
  do_raw_spin_lock+0xc0/0x118
  _raw_spin_lock_irqsave+0x80/0x14c
  __pm_runtime_resume+0x38/0xb8
  device_link_add+0x3b8/0x5d0
  core_get_v4+0x268/0x2d8 [venus_core]
  venus_probe+0x108/0x458 [venus_core]
  platform_drv_probe+0x54/0xa8
  really_probe+0xe4/0x3b0
  driver_probe_device+0x58/0xb8
  device_driver_attach+0x74/0x80
  __driver_attach+0x58/0xe8
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x1f8
  driver_register+0x64/0x120
  __platform_driver_register+0x48/0x58
  qcom_venus_driver_init+0x20/0x1000 [venus_core]
  do_one_initcall+0x84/0x458
  do_init_module+0x58/0x208
  load_module+0x1ec0/0x26a8
  __do_sys_finit_module+0xb8/0xf8
  __arm64_sys_finit_module+0x20/0x30
  el0_svc_common.constprop.0+0x7c/0x1c0
  do_el0_svc+0x24/0x90
  el0_sync_handler+0x180/0x188
  el0_sync+0x174/0x180
 Code: 91002100 8b0200c2 f861d884 aa0203e1 (f8246828)
 ---[ end trace f1f687c15fd6b2ca ]---
 note: modprobe[889] exited with preempt_count 1

After revisit the OPP part of the code I found that OPP pmdomain
is detached with direct call to dev_pm_domain_detach instead of
OPP wraper for detaching pmdomains with OPP table. Correct this
by calling the OPP dev_pm_opp_detach_genpd.

Fixes: 9a538b83612c ('media: venus: core: Add support for opp tables/perf voting')
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: venus: venc: Fix setting of profile and level 2020-11-16T18:06:10+00:00 Stanimir Varbanov stanimir.varbanov@linaro.org 2020-10-27T09:19:36+00:00 a7a20f721e812a52a62a00de20dcd0779fbb587f The profile and level in op_set_ctrl was recently changed but during v4l2_ctrl_handler_setup profile and level control values are mangled. Fixes: 435c53c3698f ("media: venus: venc: Use helper to set profile and level") Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
The profile and level in op_set_ctrl was recently changed but during
v4l2_ctrl_handler_setup profile and level control values are mangled.

Fixes: 435c53c3698f ("media: venus: venc: Use helper to set profile and level")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: media/platform/marvell-ccic: fix warnings when CONFIG_PM is not enabled 2020-11-05T13:32:35+00:00 Randy Dunlap rdunlap@infradead.org 2020-10-20T06:02:04+00:00 e6fcf468c51da28c56ea447e147475a731acbdf1 Fix build warnings when CONFIG_PM is not set/enabled: ../drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: 'mmpcam_runtime_suspend' defined but not used [-Wunused-function] 324 | static int mmpcam_runtime_suspend(struct device *dev) ../drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: 'mmpcam_runtime_resume' defined but not used [-Wunused-function] 310 | static int mmpcam_runtime_resume(struct device *dev) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
Fix build warnings when CONFIG_PM is not set/enabled:

../drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: 'mmpcam_runtime_suspend' defined but not used [-Wunused-function]
  324 | static int mmpcam_runtime_suspend(struct device *dev)
../drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: 'mmpcam_runtime_resume' defined but not used [-Wunused-function]
  310 | static int mmpcam_runtime_resume(struct device *dev)

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: mtk-vcodec: fix build breakage when one of VPU or SCP is enabled 2020-11-05T13:32:11+00:00 Alexandre Courbot acourbot@chromium.org 2020-10-13T12:44:28+00:00 2da185d6fe969ade346ad03461c3da860c602503 The addition of MT8183 support added a dependency on the SCP remoteproc module. However the initial patch used the "select" Kconfig directive, which may result in the SCP module to not be compiled if remoteproc was disabled. In such a case, mtk-vcodec would try to link against non-existent SCP symbols. "select" was clearly misused here as explained in kconfig-language.txt. Replace this by a "depends" directive on at least one of the VPU and SCP modules, to allow the driver to be compiled as long as one of these is enabled, and adapt the code to support this new scenario. Also adapt the Kconfig text to explain the extra requirements for MT8173 and MT8183. Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
The addition of MT8183 support added a dependency on the SCP remoteproc
module. However the initial patch used the "select" Kconfig directive,
which may result in the SCP module to not be compiled if remoteproc was
disabled. In such a case, mtk-vcodec would try to link against
non-existent SCP symbols. "select" was clearly misused here as explained
in kconfig-language.txt.

Replace this by a "depends" directive on at least one of the VPU and
SCP modules, to allow the driver to be compiled as long as one of these
is enabled, and adapt the code to support this new scenario.

Also adapt the Kconfig text to explain the extra requirements for MT8173
and MT8183.

Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: mtk-vcodec: move firmware implementations into their own files 2020-11-05T13:31:32+00:00 Alexandre Courbot acourbot@chromium.org 2020-10-13T12:44:27+00:00 46233e91fa24a91bffca0680b1c55282ba601918 mtk-vcodec supports two kinds of firmware, VPU and SCP. Both were supported from the same source files, but this is clearly unclean and makes it more difficult to disable support for one or the other. Move these implementations into their own file, after adding the necessary private interfaces. [hverkuil: smatch fix: mtk_vcodec_fw_vpu_init() error: uninitialized symbol 'rst_id'.] Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
mtk-vcodec supports two kinds of firmware, VPU and SCP. Both were
supported from the same source files, but this is clearly unclean and
makes it more difficult to disable support for one or the other.

Move these implementations into their own file, after adding the
necessary private interfaces.

[hverkuil: smatch fix: mtk_vcodec_fw_vpu_init() error: uninitialized symbol 'rst_id'.]

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping 2020-10-15T21:43:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-15T21:43:29+00:00 5a32c3413d3340f90c82c84b375ad4b335a59f28 Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ... 
Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm 2020-10-15T17:46:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-15T17:46:16+00:00 93b694d096cc10994c817730d4d50288f9ae3d66 Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ... 
Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats 2020-10-08T07:09:37+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2020-10-02T10:26:52+00:00 811b8d66f936f48ec8ed330756c6be226cf28b68 pixelformat in vin priv structure holds V4L2_PIX_FMT_* and not MEDIA_BUS_FMT_* so make sure we check against V4L2_PIX_FMT_* formats while setting the VNIS_REG. Fixes: 8c3e0f67df6c9 ("media: rcar-vin: Extend RAW8 support to all RGB layouts") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
pixelformat in vin priv structure holds V4L2_PIX_FMT_* and not
MEDIA_BUS_FMT_* so make sure we check against V4L2_PIX_FMT_* formats
while setting the VNIS_REG.

Fixes: 8c3e0f67df6c9 ("media: rcar-vin: Extend RAW8 support to all RGB layouts")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> 2020-10-06T05:07:04+00:00 Christoph Hellwig hch@lst.de 2020-09-11T08:56:52+00:00 0b1abd1fb7efafc25231c54a67c6fbb3d3127efd Merge dma-contiguous.h into dma-map-ops.h, after removing the comment describing the contiguous allocator into kernel/dma/contigous.c. Signed-off-by: Christoph Hellwig <hch@lst.de> 
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
media: platform: s5p-mfc: Fix adding a standard frame skip mode control 2020-10-01T07:27:47+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-09-28T08:48:44+00:00 6ca3549d870724495f96debfd85e96fa19dd4009 Add proper control type to the recently introduced V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE control. This will forward it to v4l2_ctrl_new_std_menu() not v4l2_ctrl_new_std(), what causes the failure. This fixes the following warning during driver initialization: s5p_mfc_enc_ctrls_setup:2671: Adding control (18) failed s5p_mfc_open:811: Failed to setup mfc controls Fixes: ef56b3ee4f54 ("media: s5p-mfc: Use standard frame skip mode control") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 
Add proper control type to the recently introduced
V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE control. This will forward it to
v4l2_ctrl_new_std_menu() not v4l2_ctrl_new_std(), what causes the
failure. This fixes the following warning during driver initialization:

s5p_mfc_enc_ctrls_setup:2671: Adding control (18) failed
s5p_mfc_open:811: Failed to setup mfc controls

Fixes: ef56b3ee4f54 ("media: s5p-mfc: Use standard frame skip mode control")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>