linux-stable.git/drivers/media/platform, branch linux-5.14.y

media: venus: fix vpp frequency calculation for decoder

2021-11-17T10:04:04+00:00

[ Upstream commit 1444232152ea33f5ae41fc14bade3e74d642b634 ]

In existing video driver implementation vpp frequency calculation in
calculate_inst_freq() is always zero because the value of vpp_freq_per_mb
is always zero for decoder.

Fixed this by correcting the calculating the vpp frequency calculation for
decoder.

Fixes: 3cfe5815ce0e ("media: venus: Enable low power setting for encoder")
Signed-off-by: Mansur Alisha Shaik 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: atmel: fix the ispck initialization

2021-11-17T10:04:03+00:00

[ Upstream commit d7f26849ed7cc875d0ff7480c2efebeeccea2bad ]

The runtime enabling of the ISPCK (internally clocks the pipeline inside
the ISC) has to be done after the pm_runtime for the ISC dev has been
started.

After the commit by Mauro:
the ISC failed to probe with the error:

atmel-sama5d2-isc f0008000.isc: failed to enable ispck: -13
atmel-sama5d2-isc: probe of f0008000.isc failed with error -13

This is because the enabling of the ispck is done too early in the probe,
and the PM runtime returns invalid request.
Thus, moved this clock enabling after pm_runtime_idle is called.

The ISPCK is required only for sama5d2 type of ISC.
Thus, add a bool inside the isc struct that is platform dependent.
For the sama7g5-isc, the enabling of the ISPCK is wrong and does not make
sense. Removed it from the sama7g5 probe. In sama7g5-isc, there is only
one clock, the MCK, which also clocks the internal pipeline of the ISC.

Adapted the clk_prepare and clk_unprepare to request the runtime PM
for both clocks (MCK and ISPCK) in case of sama5d2-isc, and the single
clock (MCK) in case of sama7g5-isc.

Fixes: dd97908ee350 ("media: atmel: properly get pm_runtime")
Signed-off-by: Eugen Hristev 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: sun6i-csi: Allow the video device to be open multiple times

2021-11-17T10:04:02+00:00

[ Upstream commit 8ed852834683ebe064157e069af8dfb41cad6403 ]

Previously it was possible, but a recent fix for uninitialized
`ret` variable broke this behavior.

v4l2_fh_is_singular_file() check is there just to determine
whether the power needs to be enabled, and it's not a failure
if it returns false.

Fixes: ba9139116bc0 ("media: sun6i-csi: add a missing return code")
Signed-off-by: Ondrej Jirman 
Reviewed-by: Jernej Skrabec 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx-jpeg: Fix the error handling path of 'mxc_jpeg_probe()'

2021-11-17T10:04:02+00:00

[ Upstream commit 5c47dc6657543b3c4dffcbe741fb693b9b96796d ]

A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a
corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling
path of the probe, as already done in the remove function.

Update the error handling path accordingly.

Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'

2021-11-17T10:04:02+00:00

[ Upstream commit 2143ad413c05c7be24c3a92760e367b7f6aaac92 ]

A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.

Update the error handling path accordingly.

Fixes: 3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET 
Reviewed-by: Houlong Wei 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: mtk-vcodec: venc: fix return value when start_streaming fails

2021-11-17T10:04:02+00:00

[ Upstream commit 065a7c66bd8b21db212fa86187ff12f0cac6ea6d ]

In case vb2ops_venc_start_streaming fails, the error value
is overwritten by the ret value of pm_runtime_put which might
be 0. Fix it.

Fixes: 985c73693fe5a (" media: mtk-vcodec: Separating mtk encoder driver")
Signed-off-by: Dafna Hirschfeld 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: meson-ge2d: Fix rotation parameter changes detection in 'ge2d_s_ctrl()'

2021-11-17T10:04:01+00:00

[ Upstream commit 4b9e3e8af4b336eefca1f1ee535bc4b6734ed6aa ]

There is likely a typo here. To be consistent, we should compare
'fmt.height' with 'ctx->out.pix_fmt.height', not 'ctx->out.pix_fmt.width'.

Instead of fixing the test, just remove it and copy 'fmt' unconditionally.

Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Christophe JAILLET 
Acked-by: Neil Armstrong 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: allegro: ignore interrupt if mailbox is not initialized

2021-11-17T10:03:52+00:00

[ Upstream commit 1ecda6393db4be44aba27a243e648dc98c9b92e3 ]

The mailbox is initialized after the interrupt handler is installed. As
the firmware is loaded and started even later, it should not happen that
the interrupt occurs without the mailbox being initialized.

As the Linux Driver Verification project (linuxtesting.org) keeps
reporting this as an error, add a check to ignore interrupts before the
mailbox is initialized to fix this potential null pointer dereference.

Reported-by: Yuri Savinykh 
Reported-by: Nadezda Lutovinova 
Signed-off-by: Michael Tretter 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: imx-jpeg: Fix possible null pointer dereference

2021-11-17T10:03:49+00:00

[ Upstream commit 83f5f0633b156c636f5249d3c10f2a9423dd4c96 ]

Found by Coverity scan.

Signed-off-by: Mirela Rabulea 
Reviewed-by: Laurentiu Palcu 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: rcar-csi2: Add checking to rcsi2_start_receiver()

2021-11-17T10:03:48+00:00

[ Upstream commit fc41665498332ad394b7db37f23e9394096ddc71 ]

If rcsi2_code_to_fmt() return NULL, then null pointer dereference occurs
in the next cycle. That should not be possible now but adding checking
protects from future bugs.
The patch adds checking if format is NULL.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova 
Reviewed-by: Jacopo Mondi 
Reviewed-by: Niklas Söderlund 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin