linux-stable.git/drivers/media/platform, branch linux-4.9.y

media: coda: Add check for kmalloc

2023-01-07T11:07:20+00:00

[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]

As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang 
Signed-off-by: Hans Verkuil 
Signed-off-by: Sasha Levin

media: coda: Add check for dcoda_iram_alloc

2023-01-07T11:07:20+00:00

[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]

As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang 
Signed-off-by: Hans Verkuil 
Signed-off-by: Sasha Levin

media: c8sectpfe: Add of_node_put() when breaking out of loop

2023-01-07T11:07:20+00:00

[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]

In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He 
Signed-off-by: Hans Verkuil 
Signed-off-by: Sasha Levin

media: platform: exynos4-is: Fix error handling in fimc_md_init()

2023-01-07T11:07:17+00:00

[ Upstream commit b434422c45282a0573d8123239abc41fa72665d4 ]

A problem about modprobe s5p_fimc failed is triggered with the
following log given:

 [  272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
 modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy

The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:

 fimc_md_init()
   fimc_register_driver() # register fimc_driver
   platform_driver_register()
     platform_driver_register()
       driver_register()
         bus_add_driver()
           dev = kzalloc(...) # OOM happened
   # return without unregister fimc_driver

Fix by unregister fimc_driver when platform_driver_register() returns
error.

Fixes: d3953223b090 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can 
Signed-off-by: Hans Verkuil 
Signed-off-by: Sasha Levin

media: vivid: fix compose size exceed boundary

2023-01-07T11:07:16+00:00

[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]

syzkaller found a bug:

 BUG: unable to handle page fault for address: ffffc9000a3b1000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
 RIP: 0010:memcpy_erms+0x6/0x10
[...]
 Call Trace:
  
  ? tpg_fill_plane_buffer+0x856/0x15b0
  vivid_fillbuff+0x8ac/0x1110
  vivid_thread_vid_cap_tick+0x361/0xc90
  vivid_thread_vid_cap+0x21a/0x3a0
  kthread+0x143/0x180
  ret_from_fork+0x1f/0x30
  

This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.

Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Sasha Levin

media: vivid: dev->bitmap_cap wasn't freed in all cases

2022-11-03T14:49:18+00:00

[ Upstream commit 1f65ea411cc7b6ff128d82a3493d7b5648054e6f ]

Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.

This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.

Signed-off-by: Hans Verkuil 
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: vivid: s_fbuf: add more sanity checks

2022-11-03T14:49:18+00:00

[ Upstream commit f8bcaf714abfc94818dff8c0db84d750433984f4 ]

VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.

Signed-off-by: Hans Verkuil 
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init

2022-10-26T11:15:42+00:00

[ Upstream commit 1c78f19c3a0ea312a8178a6bfd8934eb93e9b10a ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop

2022-10-26T11:15:42+00:00

[ Upstream commit 211f8304fa21aaedc2c247f0c9d6c7f1aaa61ad7 ]

In fimc_is_register_subdevs(), we need to call of_node_put() for
the reference 'i2c_bus' when breaking out of the
for_each_compatible_node() which has increased the refcount.

Fixes: 9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Liang He 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: exynos4-is: Change clk_disable to clk_disable_unprepare

2022-06-14T14:52:32+00:00

[ Upstream commit 9fadab72a6916c7507d7fedcd644859eef995078 ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: b4155d7d5b2c ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured")
Signed-off-by: Miaoqian Lin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin