linux-stable.git/drivers/media/platform, branch linux-4.15.y

media: v4l: vsp1: Fix header display list status check in continuous mode

2018-04-19T06:55:08+00:00

commit 613928e85317b945c863bb893f5737d2f22f5425 upstream.

To allow dual pipelines utilising two WPF entities when available, the
VSP was updated to support header-mode display list in continuous
pipelines.

A small bug in the status check of the command register causes the
second pipeline to be directly afflicted by the running of the first;
appearing as a perceived performance issue with stuttering display.

Fix the vsp1_dl_list_hw_update_pending() call to ensure that the read
comparison corresponds to the correct pipeline.

Fixes: eaf4bfad6ad8 ("v4l: vsp1: Add support for header display lists in continuous mode")

Cc: "Stable v4.14+" 
Signed-off-by: Kieran Bingham 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: tegra-cec: reset rx_buf_cnt when start bit detected

2018-03-28T16:22:58+00:00

commit e113d65ae417ae6d9be229649b81d404c47ade79 upstream.

If a start bit is detected, then reset the receive buffer counter to 0.

This ensures that no stale data is in the buffer if a message is
broken off midstream due to e.g. a Low Drive condition and then
retransmitted.

The only Rx interrupts we need to listen to are RX_REGISTER_FULL (i.e.
a valid byte was received) and RX_START_BIT_DETECTED (i.e. a new
message starts and we need to reset the counter).

Signed-off-by: Hans Verkuil 
Cc:       # for v4.15 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: davinci: fix a debug printk

2018-03-24T10:02:49+00:00

[ Upstream commit 4f6c11044f512356cb63d3df0f3b38db79dc6736 ]

Two orthogonal changesets caused a breakage at a printk
inside davinci. Commit a2d17962c9ca
("[media] davinci: Switch from V4L2 OF to V4L2 fwnode")
made davinci to use struct fwnode_handle instead of
struct device_node. Commit 68d9c47b1679
("media: Convert to using %pOF instead of full_name")
changed the printk to not use ->full_name, but, instead,
to rely on %pOF.

With both patches applied, the Kernel will do the wrong
thing, as warned by smatch:
	drivers/media/platform/davinci/vpif_capture.c:1399 vpif_async_bound() error: '%pOF' expects argument of type 'struct device_node*', argument 5 has type 'void*'

So, change the logic to actually print the device name
that was obtained before the print logic.

Fixes: 68d9c47b1679 ("media: Convert to using %pOF instead of full_name")
Fixes: a2d17962c9ca ("[media] davinci: Switch from V4L2 OF to V4L2 fwnode")

Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Lad, Prabhakar 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: s5p-mfc: Fix lock contention - request_firmware() once

2018-03-24T10:02:47+00:00

[ Upstream commit f45ce9877561044090010e0eb0fad644232ded04 ]

Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.

fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.

This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().

Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.

s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.

This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:

[  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[  552.199488]  (&dev->mfc_mutex){+.+.}, at: [] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.207459]
               but task is already holding lock:
[  552.213264]  (&mm->mmap_sem){++++}, at: [] vm_mmap_pgoff+0x44/0xb8
[  552.220284]
               which lock already depends on the new lock.

[  552.228429]
               the existing dependency chain (in reverse order) is:
[  552.235881]
               -> #2 (&mm->mmap_sem){++++}:
[  552.241259]        __might_fault+0x80/0xb0
[  552.245331]        filldir64+0xc0/0x2f8
[  552.249144]        call_filldir+0xb0/0x14c
[  552.253214]        ext4_readdir+0x768/0x90c
[  552.257374]        iterate_dir+0x74/0x168
[  552.261360]        SyS_getdents64+0x7c/0x1a0
[  552.265608]        ret_fast_syscall+0x0/0x28
[  552.269850]
               -> #1 (&type->i_mutex_dir_key#2){++++}:
[  552.276180]        down_read+0x48/0x90
[  552.279904]        lookup_slow+0x74/0x178
[  552.283889]        walk_component+0x1a4/0x2e4
[  552.288222]        link_path_walk+0x174/0x4a0
[  552.292555]        path_openat+0x68/0x944
[  552.296541]        do_filp_open+0x60/0xc4
[  552.300528]        file_open_name+0xe4/0x114
[  552.304772]        filp_open+0x28/0x48
[  552.308499]        kernel_read_file_from_path+0x30/0x78
[  552.313700]        _request_firmware+0x3ec/0x78c
[  552.318291]        request_firmware+0x3c/0x54
[  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
[  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
[  552.333394]        v4l2_open+0xa0/0x104 [videodev]
[  552.338137]        chrdev_open+0xa4/0x18c
[  552.342121]        do_dentry_open+0x208/0x310
[  552.346454]        path_openat+0x28c/0x944
[  552.350526]        do_filp_open+0x60/0xc4
[  552.354512]        do_sys_open+0x118/0x1c8
[  552.358586]        ret_fast_syscall+0x0/0x28
[  552.362830]
               -> #0 (&dev->mfc_mutex){+.+.}:
               -> #0 (&dev->mfc_mutex){+.+.}:
[  552.368379]        lock_acquire+0x6c/0x88
[  552.372364]        __mutex_lock+0x68/0xa34
[  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
[  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
[  552.391601]        mmap_region+0x3a8/0x638
[  552.395673]        do_mmap+0x330/0x3a4
[  552.399400]        vm_mmap_pgoff+0x90/0xb8
[  552.403472]        SyS_mmap_pgoff+0x90/0xc0
[  552.407632]        ret_fast_syscall+0x0/0x28
[  552.411876]
               other info that might help us debug this:

[  552.419848] Chain exists of:
                 &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem

[  552.431200]  Possible unsafe locking scenario:

[  552.437092]        CPU0                    CPU1
[  552.441598]        ----                    ----
[  552.446104]   lock(&mm->mmap_sem);
[  552.449484]                                lock(&type->i_mutex_dir_key#2);
[  552.456329]                                lock(&mm->mmap_sem);
[  552.462222]   lock(&dev->mfc_mutex);
[  552.465775]
                *** DEADLOCK ***

Signed-off-by: Shuah Khan 
Signed-off-by: Sylwester Nawrocki 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt

2018-03-24T10:02:44+00:00

[ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ]

_channel_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference. Fix this by moving the pointer dereference
after _channel_ has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")

Signed-off-by: Gustavo A. R. Silva 
Acked-by: Patrice Chotard 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: davinci: vpif_capture: add NULL check on devm_kzalloc return value

2018-03-19T08:09:58+00:00

[ Upstream commit 5a18c2434f8bfc8bc2fb0f8af3e44f7408d63e4f ]

Check return value from call to devm_kzalloc() in order to prevent
a NULL pointer dereference.

This issue was detected with the help of Coccinelle.

Fixes: 4a5f8ae50b66 ("[media] davinci: vpif_capture: get subdevs from DT when available")

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: vsp1: Prevent suspending and resuming DRM pipelines

2018-03-19T08:09:58+00:00

[ Upstream commit a17d2d6cd9985ca09a9e384f1bc71d710f7e5203 ]

When used as part of a display pipeline, the VSP is stopped and
restarted explicitly by the DU from its suspend and resume handlers.
There is thus no need to stop or restart pipelines in the VSP suspend
and resume handlers, and doing so would cause the hardware to be
left in a misconfigured state.

Ensure that the VSP suspend and resume handlers do not affect DRM-based
pipelines.

Signed-off-by: Kieran Bingham 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

media: vivid: fix module load error when enabling fb and no_error_inj=1

2018-02-16T19:06:54+00:00

commit 0fa2c5f954c41e870fe327907c01cb8f7ea8d5a2 upstream.

If the framebuffer is enabled and error injection is disabled, then
creating the controls for the video output device would fail with an
error.

This is because the Clear Framebuffer control uses the 'vivid control
class' and that control class isn't added if error injection is disabled.

In addition, this control was added to e.g. vbi devices as well, which
makes no sense.

Move this control to its own control handler and handle it correctly.

Signed-off-by: Hans Verkuil 
Acked-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: tegra-cec: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

2018-02-12T06:07:22+00:00

commit 20772c1a6f0e03d4231e2b539863987fa0c94e89 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/tegra-cec/tegra_cec.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

2018-02-12T06:07:22+00:00

commit 5331aec1bf9c9da557668174e0a4bfcee39f1121 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman