linux-stable.git/drivers/media/platform/vimc/vimc-sensor.c, branch v5.3

Merge tag 'v5.2-rc4' into media/master

2019-06-11T16:09:28+00:00

There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.

So, let's merge back from upstream and address those.

Linux 5.2-rc4

* tag 'v5.2-rc4': (767 commits)
  Linux 5.2-rc4
  MAINTAINERS: Karthikeyan Ramasubramanian is MIA
  i2c: xiic: Add max_read_len quirk
  lockref: Limit number of cmpxchg loop retries
  uaccess: add noop untagged_addr definition
  x86/insn-eval: Fix use-after-free access to LDT entry
  kbuild: use more portable 'command -v' for cc-cross-prefix
  s390/unwind: correct stack switching during unwind
  block, bfq: add weight symlink to the bfq.weight cgroup parameter
  cgroup: let a symlink too be created with a cftype file
  drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
  drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
  drm/nouveau/secboot: split out FW version-specific LS function pointers
  drm/nouveau/secboot: pass max supported FW version to LS load funcs
  drm/nouveau/core: support versioned firmware loading
  drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
  block: free sched's request pool in blk_cleanup_queue
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ...

Signed-off-by: Mauro Carvalho Chehab

media: vimc: Remove or modify stream checks

2019-06-05T16:47:08+00:00

Change the way subdevices check if the stream is running. Verify the stream
pointer instead of src_frame. This makes easier to get rid of the void* and
u8* that points to frames in the subdevices structs.

Remove checks that s_stream does on subdevices. They are redundant since
the Media Controller Framework doesn't allow two streaming on the same
media pipeline at the same time.

Signed-off-by: André Almeida 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman

media: vimc: Remove unneeded return statement in vimc_sen_s_stream()

2019-05-28T17:11:51+00:00

The other subdevice implementations in vimc (debayer and scaler) which
share their code structure with the sensor do not have an explicit
return statement at the end of the s_stream(0) code path. Align the
sensor subdevice by dropping the return statement.

Signed-off-by: Niklas Söderlund 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: propagate pixel format in the stream

2019-04-22T14:58:51+00:00

Media bus codes were being mapped to pixelformats, which causes a
limitation on vimc because not all pixelformats can be mapped to media
bus codes.
Also, media bus codes are an internal configuration from the device.
Userspace only assures media bus codes matches between pads and expects
the image in a given pixelformat. So we can allow almost any media bus
format to be configured between pads, except for debayer that expects a
media bus code of type bayer in the sink pad.

[hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available]
[hverkuil-cisco@xs4all.nl: made vimc_mbus_list static]

Signed-off-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: use new release op

2019-03-19T17:34:16+00:00

Use the new v4l2_subdev_internal_ops release op to free the
subdev memory only when the last user closed the file handle.

Move v4l2_device_unregister_subdev() to the end of the
vimc_ent_sd_unregister() function since now the unregister_subdev()
call may free the vimc_ent_device struct which is used after the
unregister_subdev() call. So this now has to be done last.

Signed-off-by: Hans Verkuil 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: Remove unused but set variables

2019-02-18T15:58:08+00:00

Remove unused but set variables to clean up the code and avoid
warning.

Signed-off-by: Lucas A. M. Magalhães 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: Add vimc-streamer for stream control

2019-02-07T17:23:09+00:00

Add a linear pipeline logic for the stream control. It's created by
walking backwards on the entity graph. When the stream starts it will
simply loop through the pipeline calling the respective process_frame
function of each entity.

Fixes: f2fe89061d797 ("vimc: Virtual Media Controller core, capture
and sensor")

Cc: stable@vger.kernel.org # for v4.20
Signed-off-by: Lucas A. M. Magalhães 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
[hverkuil-cisco@xs4all.nl: fixed small space-after-tab issue in the patch]
Signed-off-by: Mauro Carvalho Chehab

media: vimc: constify structures stored in fields of v4l2_subdev_ops structure

2018-11-23T11:04:32+00:00

The fields of a v4l2_subdev_ops structure are all const, so the
structures that are stored there and are not used elsewhere can be
const as well.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: implement basic v4l2-ctrls

2018-09-11T14:51:08+00:00

Add brightness, contrast, hue and saturation controls in vimc-sensor

Signed-off-by: Guilherme Alcarde Gallo 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab