linux-stable.git/drivers/media/platform/vimc/vimc-sensor.c, branch linux-5.4.y

media: vimc: Fix gpf in rmmod path when stream is active

2019-12-31T15:43:28+00:00

[ Upstream commit d7fb5c361c2a2666d20e044206e1756bc8e87df2 ]

If vimc module is removed while streaming is in progress, sensor subdev
unregister runs into general protection fault when it tries to unregister
media entities. This is a common subdev problem related to releasing
pads from v4l2_device_unregister_subdev() before calling unregister.
Unregister references pads during unregistering subdev.

The sd release handler is the right place for releasing all sd resources
including pads. The release handlers currently release all resources
except the pads.

Fix v4l2_device_unregister_subdev() not release pads and release pads
from the sd_int_op release handlers.

kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI
kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4
kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60
kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89
kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246
kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018
kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00
kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00
kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038
kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2
kernel: [ 4136.715885] FS:  00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000
kernel: [ 4136.715888] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0
kernel: [ 4136.715894] Call Trace:
kernel: [ 4136.715903]  media_gobj_destroy+0x14/0x20
kernel: [ 4136.715908]  __media_device_unregister_entity+0xb3/0xe0
kernel: [ 4136.715915]  media_device_unregister_entity+0x30/0x40
kernel: [ 4136.715920]  v4l2_device_unregister_subdev+0xa8/0xe0
kernel: [ 4136.715928]  vimc_ent_sd_unregister+0x1e/0x30 [vimc]
kernel: [ 4136.715933]  vimc_sen_rm+0x16/0x20 [vimc]
kernel: [ 4136.715938]  vimc_remove+0x3e/0xa0 [vimc]
kernel: [ 4136.715945]  platform_drv_remove+0x25/0x50
kernel: [ 4136.715951]  device_release_driver_internal+0xe0/0x1b0
kernel: [ 4136.715956]  device_driver_detach+0x14/0x20
kernel: [ 4136.715960]  unbind_store+0xd1/0x130
kernel: [ 4136.715965]  drv_attr_store+0x27/0x40
kernel: [ 4136.715971]  sysfs_kf_write+0x48/0x60
kernel: [ 4136.715976]  kernfs_fop_write+0x128/0x1b0
kernel: [ 4136.715982]  __vfs_write+0x1b/0x40
kernel: [ 4136.715987]  vfs_write+0xc3/0x1d0
kernel: [ 4136.715993]  ksys_write+0xaa/0xe0
kernel: [ 4136.715999]  __x64_sys_write+0x1a/0x20
kernel: [ 4136.716005]  do_syscall_64+0x5a/0x130
kernel: [ 4136.716010]  entry_SYSCALL_64_after_hwframe+0x4

Signed-off-by: Shuah Khan 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

media: vimc: sen: remove unused kthread_sen field

2019-12-17T18:56:18+00:00

commit 3ea35d5db448c27807acbcc7a2306cf65c5e6397 upstream.

The field kthread_sen in the vimc_sen_device is
not set and used. So remove the field and
the code that check if it is non NULL

Signed-off-by: Dafna Hirschfeld 
Cc:       # for v5.4 and up
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: Revert "media: vimc: propagate pixel format in the stream"

2019-08-13T14:40:38+00:00

This reverts commit b6c61a6c37317efd7327199bfe24770af3d7e799.

The requested pixelformat is being propagated from the capture to the
tpg in the sensor.

This was a bad design choice, as we start having the following issues:

* We set a pixelformat in the capture;
* We set matching media bus formats in the subdevices pads;
* Link validate looks fine (sizes matches, media bus formats matches);
* Issue: if some of the subdevice doesn't know how to generate the
requested pixelformat in the capture, then stream_on fails. This is bad
because capture says it supports that pixelformat, everything looks
fine, but it is not, and there is no way to find it out through the
links.

This patch was implemented so we could request any pixelformat from the
pipeline regardeless of the media bus format configured between pads.
Not all pixelformat can be mapped into a media bus code (e.g.
multiplanar formats), so with this patch we could request those
pixelformats from the tpg.

Solution: map pixelformats to media bus codes as before, and implement
conversions to other pixelformats in the capture to support multiplanar.

So first step to this solution is to revert this patch.

Signed-off-by: Helen Koike 
Signed-off-by: Lucas A. M. Magalhaes 
Tested-by: André Almeida 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: Revert "media: vimc: Remove or modify stream checks"

2019-08-13T14:39:36+00:00

This reverts commit 3c1b9ac753e99005d7ee0a883d6e5b577ba32aa9.

Required to Revert "media: vimc: propagate pixel format in the stream"
which introduced the stream object in the vimc_ent_device struct.

Signed-off-by: Helen Koike 
Signed-off-by: Lucas A. M. Magalhaes 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

Merge tag 'v5.2-rc4' into media/master

2019-06-11T16:09:28+00:00

There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.

So, let's merge back from upstream and address those.

Linux 5.2-rc4

* tag 'v5.2-rc4': (767 commits)
  Linux 5.2-rc4
  MAINTAINERS: Karthikeyan Ramasubramanian is MIA
  i2c: xiic: Add max_read_len quirk
  lockref: Limit number of cmpxchg loop retries
  uaccess: add noop untagged_addr definition
  x86/insn-eval: Fix use-after-free access to LDT entry
  kbuild: use more portable 'command -v' for cc-cross-prefix
  s390/unwind: correct stack switching during unwind
  block, bfq: add weight symlink to the bfq.weight cgroup parameter
  cgroup: let a symlink too be created with a cftype file
  drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
  drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
  drm/nouveau/secboot: split out FW version-specific LS function pointers
  drm/nouveau/secboot: pass max supported FW version to LS load funcs
  drm/nouveau/core: support versioned firmware loading
  drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
  block: free sched's request pool in blk_cleanup_queue
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ...

Signed-off-by: Mauro Carvalho Chehab

media: vimc: Remove or modify stream checks

2019-06-05T16:47:08+00:00

Change the way subdevices check if the stream is running. Verify the stream
pointer instead of src_frame. This makes easier to get rid of the void* and
u8* that points to frames in the subdevices structs.

Remove checks that s_stream does on subdevices. They are redundant since
the Media Controller Framework doesn't allow two streaming on the same
media pipeline at the same time.

Signed-off-by: André Almeida 
Acked-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman

media: vimc: Remove unneeded return statement in vimc_sen_s_stream()

2019-05-28T17:11:51+00:00

The other subdevice implementations in vimc (debayer and scaler) which
share their code structure with the sensor do not have an explicit
return statement at the end of the s_stream(0) code path. Align the
sensor subdevice by dropping the return statement.

Signed-off-by: Niklas Söderlund 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: propagate pixel format in the stream

2019-04-22T14:58:51+00:00

Media bus codes were being mapped to pixelformats, which causes a
limitation on vimc because not all pixelformats can be mapped to media
bus codes.
Also, media bus codes are an internal configuration from the device.
Userspace only assures media bus codes matches between pads and expects
the image in a given pixelformat. So we can allow almost any media bus
format to be configured between pads, except for debayer that expects a
media bus code of type bayer in the sink pad.

[hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available]
[hverkuil-cisco@xs4all.nl: made vimc_mbus_list static]

Signed-off-by: Helen Koike 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vimc: use new release op

2019-03-19T17:34:16+00:00

Use the new v4l2_subdev_internal_ops release op to free the
subdev memory only when the last user closed the file handle.

Move v4l2_device_unregister_subdev() to the end of the
vimc_ent_sd_unregister() function since now the unregister_subdev()
call may free the vimc_ent_device struct which is used after the
unregister_subdev() call. So this now has to be done last.

Signed-off-by: Hans Verkuil 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab