All users of vb2_find_timestamp() combine it with vb2_get_buffer()
to retrieve a videobuf2 buffer, given a u64 timestamp.

Introduce an API for this use-case. Users will be converted to the new
API as follow-up commits.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Extend the TPG to support generating the newly added YUVA and YUVX pixel
formats.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

This inserts 4 pixels of the RGB color 0xab55ab at the left hand side of
the image. This is only done for 3 or 4 byte RGB pixel formats. The HDMI
TMDS encoding of this pixel value equals the Video Guard Band value as
defined by HDMI (see section 5.2.2.1 in the HDMI 1.3 Specification) that
preceeds the first actual pixel of a video line. If an HDMI receiver
doesn't handle this correctly, then it might keep skipping these Video
Guard Band patterns and end up with a shorter video line. So this is a
nice pattern to test with.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Fixes smatch warning:

drivers/media/common/videobuf2/videobuf2-dma-sg.c:129 vb2_dma_sg_alloc() warn: Please consider using kvcalloc instead

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

vb2 queue ownership is managed by the ioctl handler helpers
(vb2_ioctl_*). There are however use cases where drivers can benefit
from checking queue ownership, for instance when open-coding an ioctl
handler that needs to perform additional checks before calling the
corresponding vb2 operation.

Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header,
and change its first argument to a struct vb2_queue pointer as the
function name implies it operates on a queue, not a video_device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The bus_info field is set by most drivers based on the type of the device
bus as well as the name of the device. Do this in v4l_querycap() so
drivers don't need to. This keeps compatibility with non-default and silly
bus_info.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Pull drm updates from Dave Airlie:
 "Lots of work all over, Intel improving DG2 support, amdkfd CRIU
  support, msm new hw support, and faster fbdev support.

  dma-buf:
   - rename dma-buf-map to iosys-map

  core:
   - move buddy allocator to core
   - add pci/platform init macros
   - improve EDID parser deep color handling
   - EDID timing type 7 support
   - add GPD Win Max quirk
   - add yes/no helpers to string_helpers
   - flatten syncobj chains
   - add nomodeset support to lots of drivers
   - improve fb-helper clipping support
   - add default property value interface

  fbdev:
   - improve fbdev ops speed

  ttm:
   - add a backpointer from ttm bo->ttm resource

  dp:
   - move displayport headers
   - add a dp helper module

  bridge:
   - anx7625 atomic support, HDCP support

  panel:
   - split out panel-lvds and lvds bindings
   - find panels in OF subnodes

  privacy:
   - add chromeos privacy screen support

  fb:
   - hot unplug fw fb on forced removal

  simpledrm:
   - request region instead of marking ioresource busy
   - add panel oreintation property

  udmabuf:
   - fix oops with 0 pages

  amdgpu:
   - power management code cleanup
   - Enable freesync video mode by default
   - RAS code cleanup
   - Improve VRAM access for debug using SDMA
   - SR-IOV rework special register access and fixes
   - profiling power state request ioctl
   - expose IP discovery via sysfs
   - Cyan skillfish updates
   - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
   - expose benchmark tests via debugfs
   - add module param to disable XGMI for testing
   - GPU reset debugfs register dumping support

  amdkfd:
   - CRIU support
   - SDMA queue fixes

  radeon:
   - UVD suspend fix
   - iMac backlight fix

  i915:
   - minimal parallel submission for execlists
   - DG2-G12 subplatform added
   - DG2 programming workarounds
   - DG2 accelerated migration support
   - flat CCS and CCS engine support for XeHP
   - initial small BAR support
   - drop fake LMEM support
   - ADL-N PCH support
   - bigjoiner updates
   - introduce VMA resources and async unbinding
   - register definitions cleanups
   - multi-FBC refactoring
   - DG1 OPROM over SPI support
   - ADL-N platform enabling
   - opregion mailbox #5 support
   - DP MST ESI improvements
   - drm device based logging
   - async flip optimisation for DG2
   - CPU arch abstraction fixes
   - improve GuC ADS init to work on aarch64
   - tweak TTM LRU priority hint
   - GuC 69.0.3 support
   - remove short term execbuf pins

  nouveau:
   - higher DP/eDP bitrates
   - backlight fixes

  msm:
   - dpu + dp support for sc8180x
   - dp support for sm8350
   - dpu + dsi support for qcm2290
   - 10nm dsi phy tuning support
   - bridge support for dp encoder
   - gpu support for additional 7c3 SKUs

  ingenic:
   - HDMI support for JZ4780
   - aux channel EDID support

  ast:
   - AST2600 support
   - add wide screen support
   - create DP/DVI connectors

  omapdrm:
   - fix implicit dma_buf fencing

  vc4:
   - add CSC + full range support
   - better display firmware handoff

  panfrost:
   - add initial dual-core GPU support

  stm:
   - new revision support
   - fb handover support

  mediatek:
   - transfer display binding document to yaml format.
   - add mt8195 display device binding.
   - allow commands to be sent during video mode.
   - add wait_for_event for crtc disable by cmdq.

  tegra:
   - YUV format support

  rcar-du:
   - LVDS support for M3-W+ (R8A77961)

  exynos:
   - BGR pixel format for FIMD device"

* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
  drm/i915/display: Do not re-enable PSR after it was marked as not reliable
  drm/i915/display: Fix HPD short pulse handling for eDP
  drm/amdgpu: Use drm_mode_copy()
  drm/radeon: Use drm_mode_copy()
  drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
  drm/amdgpu: Remove pointless on stack mode copies
  drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
  drm/amdgpu/dc: fix typos in comments
  drm/amdgpu: fix typos in comments
  drm/amd/pm: fix typos in comments
  drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
  drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
  drm/amdkfd: evict svm bo worker handle error
  drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
  drm/amdgpu: only allow secure submission on rings which support that
  drm/amdgpu: fixed the warnings reported by kernel test robot
  drm/amd/display: 3.2.177
  drm/amd/display: [FW Promotion] Release 0.0.108.0
  drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
  drm/amd/display: Wait for hubp read line for Pollock
  ...

Currently, the idems inside media Kconfig are out of order.
Sort them using the script below:

<script>
use strict;
use warnings;

my %config;
my @source;
my $out;

sub flush_config()
{
	if (scalar %config) {
		for my $c (sort keys %config) {
			$out .= $config{$c} . "\n";
		}
		%config = ();
	}

	return if (!scalar @source);

	$out .= "\n";
	for my $s (sort @source) {
		$out .= $s;
	}
	$out .= "\n";

	@source = ();
}

sub sort_kconfig($)
{
	my $fname = shift;
	my $cur_config = "";

	@source = ();
	$out = "";
	%config = ();

	open IN, $fname or die;
	while (<IN>) {
		if (m/^config\s+(.*)/) {
			$cur_config = $1;
			$config{$cur_config} .= $_;
		} elsif (m/^source\s+(.*)/) {
			push @source, $_;
		} elsif (m/^\s+/) {
			if ($cur_config eq "") {
				$out .= $_;
			} else {
				$config{$cur_config} .= $_;
			}
		} else {
			flush_config();
			$cur_config = "";
			$out .= $_;
		}
	}
	close IN or die;

	flush_config();

	$out =~ s/\n\n+/\n\n/g;
	$out =~ s/\n+$/\n/;

	open OUT, ">$fname";
	print OUT $out;
	close OUT;
}

for my $fname(@ARGV) {
	sort_kconfig $fname
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.

On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
	1) enable Video4Linux and make its Kconfig options to appear;
	2) it makes the Kernel build the V4L core.

while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.

With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.

At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:

	menu "Video4Linux options"
		visible if VIDEO_DEV

	source "drivers/media/v4l2-core/Kconfig"
	endmenu

but it doesn't affect anymore the V4L core drivers.

The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:

	config VIDEO_V4L2
		tristate
		depends on (I2C || I2C=n) && VIDEO_DEV
		select RATIONAL
		select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
		default (I2C || I2C=n) && VIDEO_DEV

In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.

Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Alphabetically sort entries at the Makefiles per group,
in ASCII order, e. g., using the output of:

	$ LC_ALL=C sort Makefile |grep obj-y
	...
	$ LC_ALL=C sort Makefile |grep obj.*CONFIG
	...

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>